16.4ft RGB Multi-Color Flexible WaterproofIP-65 Strip Light Kit, 300 LEDs with 44key IR Remote Controller, 3M Adhesive Tape, Plug-and-Play Design as Decorative Lighting for Home and Commercial

#ad
#ad
TorchStar Y0050X1NUS #ad - Features of rgb strip: led type-5050 smd rgb led density: 60leds/M, 300LEDs/5M, double density Beam angle: 120 degree Max. Packed with 44-key remote controller, multiple color options and highly configurable, ideal as decorative and mood lighting. This is a led strip kit consists of a 16. 4ft rgb led strip and a 44-key IR remote controller.

The rgb strip uses super bright smd led as light source, can be fixed on uneven surface and any arrow or small space due to its high flexibility and 3M self-adhesive tape on the back. On vehicle directly to its 12V battery as a decoration and will create a fabulous eye-catching special effect. This rgb remote controller is perfect for anyone who loves lots of options in addition to programmable buttons! It can control up to 32 feet of our 12V RGB flexible LED strip.

16.4ft RGB Multi-Color Flexible WaterproofIP-65 Strip Light Kit, 300 LEDs with 44key IR Remote Controller, 3M Adhesive Tape, Plug-and-Play Design as Decorative Lighting for Home and Commercial #ad - Kindly recommend: other accessories may be needed when connecting, such as a easy 4-pin connector to link strip with controller; an power adapter to convert voltage into 12V DCAll these accessories are available in our online store, you can check for it All these mentioned accessories are not included in the package.

Adhesive 3m tape on the back, plug-and-play connection, easy installation, could fit into corners and grooves. Long lifespan led strips, festivals, hallways, reduced light changing frequency perfect for DIY household lighting, parties.12v low voltage led strip light, IP65 waterproof level, silicon covered light surface for save operation.

. Flexible strip light, can be cut every 3 LEDs along the cutting mark based on your needs without damaging the light.

More information about TorchStar Y0050X1NUS #ad

ESUMIC Extension Cable Wire With 4Pin Plug for LED Strip Ribbon 5M

#ad
#ad
ESUMIC? VFC-LED-RGB-CBLE-5MWHT1 #ad - ESUMIC Extension Cable Wire With 4Pin Plug for LED Strip Ribbon 5M #ad - 4pin plug included. Length: 5m/16. 4ft. A perfect accessory for led strip ribbon use, to extend length between strip and controller or connect with strps Item come with ESUMIC packing and Thank you card Suitable for 5050 3528 smd rgb LED Strip Ribbon Light. No need to weld. Easy to install and storage.

More information about ESUMIC? VFC-LED-RGB-CBLE-5MWHT1 #ad


Similar products



SIM&NAT 20 PCS 4 Pin Male Connector Connecter for 3528 5050 SMD RGB Led Strip Lighting

#ad
#ad
SYNCHKG070817 #ad - Length: 5m/16. 4ft. Package includes: 20 PCS 4 pin plug connector. Easy to install and storage. 4pin plug included. High quality 4 pin plugs are copper electroplated. No need to weld. Sim&nat sim&nat 20 pcs 4 pin male connector connecter for 3528 5050 smd rgb led strip lighting features: 20pcs copper electroplated connector between led strip and remote controller Compatible with SMD 3528/5050 RGB LED Strip Lighting Easy Insert and Extract to Use Package Includes: 20 PCS - 4 Pin Male Connector Suitable for 5050 3528 smd rgb LED Strip Ribbon Light.

These little 4 pin male plug compatible with SMD 3528 5050 and other RGB led strip lighting. Easy insert and extract to use, 4 pin connecter fit tightly to ensure the perfect connection. Widely used as connector between 2 led strips, led strip and remote controller.

More information about SYNCHKG070817 #ad


Similar products



TronicsPros 4 Pin LED Splitter Cable RGB LED Strip Connector Y Splitter 2 Way Splitter for One to Two SMD 5050 3528 2835 RGB LED Tape Lights w/ 3x Male 4 Pin Plugs -30cm/12inch Long1 to 2 Splitter

#ad
#ad
TronicsPros SYNCHKG084739 #ad - Package content: 1x rgb led Strip Splitter Cable; 3x male 4pin plugs. Features: 1. These little 4 pin male plug compatible with SMD 3528 5050 and other RGB led strip lighting. 4pin plug included. Easy to install and storage. No need to weld. The insulation plastic of this cord adopts high quality PVC, anticorrosive.

Length: 5m/16. 4ft. 3. The cord and the 4pin plugs fit snug. Package includes: 20 PCS 4 pin plug connector. Easy insert and extract to use, 4 pin connecter fit tightly to ensure the perfect connection. If you bought from other unauthorized sellers, the quality is not guaranteed. Connect two color changing rgb 5050/3528/2835 LED strips to a single controller with this 4 pin splitter cable.

TronicsPros 4 Pin LED Splitter Cable RGB LED Strip Connector Y Splitter 2 Way Splitter for One to Two SMD 5050 3528 2835 RGB LED Tape Lights w/ 3x Male 4 Pin Plugs -30cm/12inch Long1 to 2 Splitter #ad - Tips: if you need more 4-pin male plugs, please search the following asin on amazon: aSIN: B016KSORXQ ASIN: B01FT108QA Suitable for 5050 3528 smd rgb LED Strip Ribbon Light. Widely used as connector between 2 led strips, led strip and remote controller. For example, for tingkam rgb led strips, for sylvania rgb led strips, for wentop rgb led strips, it works for supernight rgb led strips, for eTopxizu RGB LED strips, for econoled RGB LED strips, for ledmo rgb led strips, etc.

This dc power adapter cable splits 1 power signal into 2, enables you to connect 2 color changing RGB LED strips to a single controller. High quality 4 pin plugs are copper electroplated.

More information about TronicsPros SYNCHKG084739 #ad


Similar products



LEDwholesalers 12V 4A 48W AC/DC Power Adapter with 5.5x2.1mm DC Plug, Black, UL-Listed, 3228-12VR2

#ad
#ad
LEDwholesalers 3228-12VR2 #ad - 48w of maximum output power via a 5. 5x2. 1mm dc jack, center positive polarity. Length: 5m/16. 4ft. Ul-listed and ce certified, automatic thermal & overload cut-off, short circuit protection. For example, for tingkam rgb led strips, it works for supernight rgb led strips, for econoled RGB LED strips, for ledmo rgb led strips, for eTopxizu RGB LED strips, for SYLVANIA RGB LED strips, for WenTop RGB LED strips, etc.

LEDwholesalers 12V 4A 48W AC/DC Power Adapter with 5.5x2.1mm DC Plug, Black, UL-Listed, 3228-12VR2 #ad - This dc power adapter cable splits 1 power signal into 2, enables you to connect 2 color changing RGB LED strips to a single controller. 4pin plug included. Power supply with sufficient amperage for 2 strips is required. High quality cable and connectors at competitive price. Easy to install and storage. Easy insert and extract to use, 4 pin connecter fit tightly to ensure the perfect connection.

Suitable for use with electronic devices that require 12V DC and comsume less than 48W of power. 4 pin led splitter cable for smd 5050/3528/2835 rgb led strip lights. High quality 4 pin plugs are copper electroplated. Package includes: 20 PCS 4 pin plug connector.

More information about LEDwholesalers 3228-12VR2 #ad


Similar products



LEDwholesalers 4 Pin Splitter for Two Color Changing RGB LED Light Strips, 2355

#ad
#ad
LEDwholesalers ET0585 #ad - Suitable for use with electronic devices that require 12V DC and comsume less than 48W of power. 48w of maximum output power via a 5. 5x2. 1mm dc jack, center positive polarity. Enables you to connect 2 color changing RGB LED strips to a single controller. High quality cable and connectors at competitive price.

Ul-listed and ce certified, automatic thermal & overload cut-off, short circuit protection. Power supply with sufficient amperage for 2 strips is required 3224-12V. These little 4 pin male plug compatible with SMD 3528 5050 and other RGB led strip lighting. Connect two color changing RGB LED strips to a single controller with this 4 pin splitter.

LEDwholesalers 4 Pin Splitter for Two Color Changing RGB LED Light Strips, 2355 #ad - 1 male 4 pin end and 2 female 4 pin plugs. High quality 4 pin plugs are copper electroplated. 4 pin led splitter cable for smd 5050/3528/2835 rgb led strip lights. Package content: 1x rgb led Strip Splitter Cable; 3x male 4pin plugs. Energy efficient and stable 12V DC power supply. Length: 5m/16. 4ft. No need to weld.

More information about LEDwholesalers ET0585 #ad


Similar products



RecPro RV Camper Motorhome Travel Trailer 16' WHITE LED Awning Party Light w/Mounting Channel & White PCB 12v Light

#ad
#ad
Perfit #ad - Our awning kits come with a uv treated polycarbonate mounting channel w/commercial grade 3M adhesive backing strip is held in place by it's adhesive backing and compression by the channel. Does not include 110v to 12v DC power supply. Our awning light kits w/ polycarbonate mounting channel are for Permanent Installation so you do not need to remove the strip light when you open or close the awning.

For example, for etopxizu rgb led strips, for ledmo rgb led strips, for tingkam rgb led strips, for econoled RGB LED strips, for WenTop RGB LED strips, for SYLVANIA RGB LED strips, it works for supernight rgb led strips, etc. This dc power adapter cable splits 1 power signal into 2, enables you to connect 2 color changing RGB LED strips to a single controller.

RecPro RV Camper Motorhome Travel Trailer 16' WHITE LED Awning Party Light w/Mounting Channel & White PCB 12v Light #ad - . Detachable 48" power cord with 2-prong plug. No need to weld. Package includes: 20 PCS 4 pin plug connector. Power supply with sufficient amperage for 2 strips is required 3224-12V. Recpro 16' ip68 rated full waterproof LED strip light. 48w of maximum output power via a 5. 5x2. 1mm dc jack, center positive polarity.

More information about Perfit #ad


Similar products



5pcs Pack 10mm L-shape 4-conductor Quick Splitter Right Angle Corner Connector for 5050 RGB LED Strip Lights, Strip to Strip

#ad
#ad
Torchstar Y00H7NFDKA #ad - 1500 lumens. 4pin plug included. Easy insert and extract to use, 4 pin connecter fit tightly to ensure the perfect connection. The wireless design ensures seamless layout when you need to spring your light strips around sharp corners. 4 pin led splitter cable for smd 5050/3528/2835 rgb led strip lights. For example, for ledmo rgb led strips, for sylvania rgb led strips, for etopxizu rgb led strips, for econoled RGB LED strips, for WenTop RGB LED strips, for Tingkam RGB LED strips, it works for supernight rgb led strips, etc.

5pcs Pack 10mm L-shape 4-conductor Quick Splitter Right Angle Corner Connector for 5050 RGB LED Strip Lights, Strip to Strip #ad - This dc power adapter cable splits 1 power signal into 2, enables you to connect 2 color changing RGB LED strips to a single controller. Overall length of 8 inches. 16' 5m ip68 white pcb background and White LED light. Compatible with both waterproof and non-waterproof light strips. These little 4 pin male plug compatible with SMD 3528 5050 and other RGB led strip lighting.

Easy to install and storage. 1 male 4 pin end and 2 female 4 pin plugs. Detachable 48" power cord with 2-prong plug. High quality 4 pin plugs are copper electroplated. They are compatible with both non-waterproof and waterproof 10mm RGB light strips.

More information about Torchstar Y00H7NFDKA #ad


Similar products



Prest-O-Fit 2-2001 Patio Rug Stakes - Pack of 6

#ad
#ad
Prest-O-Fit 2-2001 #ad - Low profile design for smooth walking surface. Pack of six. Ul-listed and ce certified, automatic thermal & overload cut-off, short circuit protection. Easy to install and storage. 4pin plug included. Made of rust-resistant nickel-plated steel. Compatible with both waterproof and non-waterproof light strips. Detachable 48" power cord with 2-prong plug.

Does not include 110v to 12v DC power supply. 4 pin led splitter cable for smd 5050/3528/2835 rgb led strip lights. Length: 5m/16. 4ft. Suitable for 5050 3528 smd rgb LED Strip Ribbon Light. Rust-resistant, nickel-plated steel. 1500 lumens. 48w of maximum output power via a 5. 5x2. 1mm dc jack, center positive polarity.

Prest-O-Fit 2-2001 Patio Rug Stakes - Pack of 6 #ad - Prest-o-fit patio rug Stakes easily secure your patio rug or outdoor mat to the ground. Easy insert and extract to use, 4 pin connecter fit tightly to ensure the perfect connection. Enables you to connect 2 color changing RGB LED strips to a single controller. For example, it works for supernight rgb led strips, for etopxizu rgb led strips, for econoled RGB LED strips, for SYLVANIA RGB LED strips, for Tingkam RGB LED strips, for ledmo rgb led strips, for WenTop RGB LED strips, etc.

More information about Prest-O-Fit 2-2001 #ad


Similar products



Camco RV Vent Insulator And Skylight Cover With Reflective Surface, Fits Standard 14" RV Vents

#ad
#ad
Camco 45192 #ad - 4 pin led splitter cable for smd 5050/3528/2835 rgb led strip lights. Easy insert and extract to use, 4 pin connecter fit tightly to ensure the perfect connection. See description. Instructions for installation and mounting of the awning light kit. Reflective surface blocks 100% of the sun's damaging rays. Camco rv vent insulator with Reflective Surface fits snugly in RV vent opening with a full 2.

75" of foam to help stop heat transfer, keeping your RV cooler in summer and warmer in winter. Suitable for use with electronic devices that require 12V DC and comsume less than 48W of power. Easily secure your patio rug to the ground. Power supply with sufficient amperage for 2 strips is required 3224-12V.

Camco RV Vent Insulator And Skylight Cover With Reflective Surface, Fits Standard 14" RV Vents #ad - 1500 lumens. Seamless extension for your RGB light strips around sharp corner. These little 4 pin male plug compatible with SMD 3528 5050 and other RGB led strip lighting. Plug and play easy connection, no soldering needed. For example, for ledmo rgb led strips, for econoled rgb led strips, it works for supernight rgb led strips, for SYLVANIA RGB LED strips, for Tingkam RGB LED strips, for WenTop RGB LED strips, for eTopxizu RGB LED strips, etc.

This dc power adapter cable splits 1 power signal into 2, enables you to connect 2 color changing RGB LED strips to a single controller.

More information about Camco 45192 #ad


Similar products



HitLights LED Light Strip Connector, 8mm Single Color 3528 - 6 Inch Any Angle Strip to Strip, 4 Pack

#ad
#ad
HitLights CON-08S-B00A-4PK #ad - Detachable 48" power cord with 2-prong plug. Power supply with sufficient amperage for 2 strips is required 3224-12V. Compatible with both 12v and 24v strips. Connects easily to a cut section of led light strip or rope light. Reliable and easy to use cable jumper connection for bending your strips around a corner extending them across a gap or connecting them to a power supply or dimmer.

Backed by a one year warranty from hitlights for peace of mind. Overall length of 8 inches. 1 male 4 pin end and 2 female 4 pin plugs. Package content: 1x rgb led Strip Splitter Cable; 3x male 4pin plugs. Energy efficient and stable 12V DC power supply. Rust-resistant, nickel-plated steel. Connects directly to any 2pin 8 mm pcb board.

HitLights LED Light Strip Connector, 8mm Single Color 3528 - 6 Inch Any Angle Strip to Strip, 4 Pack #ad - Power supply with sufficient amperage for 2 strips is required. 16' 5m ip68 white pcb background and White LED light. These little 4 pin male plug compatible with SMD 3528 5050 and other RGB led strip lighting. Easily secure your patio rug to the ground. Solderless connection can be used by anyone. Keep your rv cooler in the Summer and warmer in the Winter.

More information about HitLights CON-08S-B00A-4PK #ad


Similar products