19 mm, 12-Piece – TEKTON WRN50170 Stubby Ratcheting Combination Wrench Set with Store and Go Keeper, Metric, 8 mm


TEKTON WRN50170 - To prevent round-off, the box end opening contacts and applies force to the flat sides of fastener heads rather than the corners. Includes store-and-go Keeper with space-saving folding handle and nonslip grippers to lock in wrenches. The set includes a Store-and-Go Keeper. Tekton stubby ratcheting combination wrenches offer the speed and ease of a ratcheting box end that stays continuously engaged with fasteners, eliminating the need to re-fit after each turn.

A 6-point opening provides a sure, snug fit on hex-shaped fasteners so you can apply maximum torque without slipping off, saving aggravation and your knuckles. Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces. This compact organizer has a folding handle that saves drawer space and nonslip grippers that lock wrenches securely in place when you're on the move.

19 mm, 12-Piece - TEKTON WRN50170 Stubby Ratcheting Combination Wrench Set with Store and Go Keeper, Metric, 8 mm - Set includes:12 stubby ratcheting combination wrenches metric: 8, 16, 10, 18, 12, 13, 14, 17, 15, 9, 19 mm1 Store and Go Stubby Wrench Keeper, 11, red Short length is easy to operate in areas with limited room. Equipped with a 72-tooth ratchet gear that needs just 5 degrees of swing arc to reach the next tooth position, it's fast and efficient when there's not much room to move.

Sized to go where others can't, a short length makes it easy to operate in confined areas. 6-point box end snugly fits hex-shaped fastener heads, gripping the flat sides, not corners, to prevent round-off.72-tooth ratchet gear needs only a 5-degree working swing arc.

More information about TEKTON WRN50170

19 mm, 12-Piece | WRN01170 - TEKTON Stubby Combination Wrench Set with Store and Go Keeper, Metric, 8 mm


TEKTON WRN01170 - Set includes: 12 stubby combination wrenches metric: 8, 10, 19 1 store and go wrench keeper, 12, 14, 17, 18, not corners, red specifications short length and a slim body make it easy to operate in areas with limited room Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers Box end opening is designed to grip flat sides of fastener head, 9, 13, 11, 15, 16, to prevent round-off Store-and-Go Wrench Keeper with folding handle and nonslip grippers locks wrenches in place Short length and a slim body make it easy to operate in areas with limited room.

Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. A 12-point box end doubles the access angles of a 6-point and prevents round-off by gripping the flat sides of fastener heads rather than the corners.

19 mm, 12-Piece | WRN01170 - TEKTON Stubby Combination Wrench Set with Store and Go Keeper, Metric, 8 mm - The store-and-go wrench Keeper has a folding handle that saves space in your drawer or tool chest. Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces. With a short length and slim body, these wrenches are easy to operate when there's not much room to work.

When you're on the move, the nonslip grippers lock wrenches securely in place. Tekton wrn01170 8mm - 19mm 12 piece stubby combination Wrench Set With every size from 8 to 19 mm, the TEKTON 12-pc.

More information about TEKTON WRN01170


Similar products



TEKTON Stubby Combination Wrench Set with Store and Go Keeper, 5/16-Inch - 3/4-Inch, 8-Piece | WRN01066


TEKTON WRN01066 - The tekton 8-pc. The 12-point box end doubles the access angles of a 6-point. This versatile storage solution has a folding handle that saves drawer space and nonslip grippers that lock wrenches securely in place when you're on the move. Set includes:8 stubby combination wrenches inch: 5/16, 7/16, 5/8, 3/4 inch1 store and Go Wrench Keeper, 1/2, 9/16, 11/16, 3/8, black Short length and a slim body make it easy to operate in areas with limited room.

The wrenches are compactly organized in the Store-and-Go Wrench Keeper. Short length and a slim body make it easy to operate in areas with limited room. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces.

TEKTON Stubby Combination Wrench Set with Store and Go Keeper, 5/16-Inch - 3/4-Inch, 8-Piece | WRN01066 - To prevent round-off, it contacts and applies force to the flat sides of fastener heads rather than the corners. Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place.

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off.

More information about TEKTON WRN01066


Similar products



TEKTON 1/2-Inch Drive Shallow Impact Socket Set, Metric, Cr-V, 6-Point, 11 mm - 32 mm, 14-Sockets | 4817


TEKTON 4817 - Even in low light, the high-contrast, permanent laser etched size markings are easy-to-read. Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces. Built for use with impact tools, these TEKTON 1/2 in. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers.

Drive shallow impact sockets fit in tight spaces to effortlessly break free rusty suspension and exhaust bolts, quickly remove stuck lug nuts, and loosen crank bolts with ease. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off.

TEKTON 1/2-Inch Drive Shallow Impact Socket Set, Metric, Cr-V, 6-Point, 11 mm - 32 mm, 14-Sockets | 4817 - Made from high-strength chrome vanadium steel, our impact sockets are more resistant to drive end round out than standard impact sockets, resulting in a longer useable life. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. The high-torque, flat sides of nuts and bolts, not just the corners, 6-point socket grips the broad, so there's no need to worry about stripping fastener head or damaging socket.

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Molded size markings keeps set organized and identifies any missing sockets. Set includes:14 1/2 in.

More information about TEKTON 4817


Similar products



1-Inch, 8 mm - 22 mm, 30-Piece | 90191 - TEKTON Combination Wrench Set with Store and Go Keeper, Inch/Metric, 1/4-Inch


Michigan Industrial Tools 90191 - Combination wrench set is a complete series of every size from 1/4 to 1 inch and 8 to 22 mm. Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off. Made of premium chrome vanadium steel with a mirror chrome finish. Meets or exceeds ANSI performance standards. High-torque, not just the corners, 6-point socket design grips the flat sides of fasteners, preventing round-of.

Shallow socket depth provides access to fasteners in tight spaces. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. The wrenches are compactly organized in the Store-and-Go Wrench Keepers.

1-Inch, 8 mm - 22 mm, 30-Piece | 90191 - TEKTON Combination Wrench Set with Store and Go Keeper, Inch/Metric, 1/4-Inch - Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces. Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish.

It's offset 15 degrees, creating clearance for your fingers and extra space to slide past whatever might be in the way. Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces.

More information about Michigan Industrial Tools 90191


Similar products



TEKTON 3/8-Inch Drive Shallow Impact Socket Set, Metric, Cr-V, 6-Point, 7 mm - 19 mm, 13-Sockets | 47915


TEKTON 47915 - High-contrast permanent laser etched size markings are easy-to-read, even in low light. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Tekton impact sockets meet or exceed ANSI performance standards. Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces.

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Made from high-strength chrome vanadium steel, our impact sockets are more resistant to drive end round out than standard impact sockets, resulting in a longer useable life. Includes two store-and-Go Keepers with space-saving folding handles and nonslip grippers to lock in wrenches.

TEKTON 3/8-Inch Drive Shallow Impact Socket Set, Metric, Cr-V, 6-Point, 7 mm - 19 mm, 13-Sockets | 47915 - The shallow socket design allows access to fasteners in tight spaces. Tekton impact sockets efficiently transfer torque from impact wrench to fastener, loosening the most stubborn nuts and bolts. Molded size markings keeps set organized and identifies any missing sockets. Set includes:13 3/8 in. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers.

Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Drive shallow impact sockets fit in tight spaces to effortlessly break free rusty suspension and exhaust bolts, quickly remove stuck lug nuts, and loosen crank bolts with ease.

More information about TEKTON 47915


Similar products



TEKTON Combination Wrench Set with Store and Go Keeper, Metric, 8 mm - 22 mm, 15-Piece | 18792


Michigan Industrial Tools 18792 - Open end is angled 15 degrees so it can flip over and engage fasteners twice as often in tight spaces. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Meets or exceeds ANSI performance standards. Made of premium chrome vanadium steel with a mirror chrome finish. High-torque, 6-point socket design grips the flat sides of fasteners, not just the corners, preventing round-off.

Shallow socket depth provides access to fasteners in tight spaces. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Short length and a slim body make it easy to operate in areas with limited room.

TEKTON Combination Wrench Set with Store and Go Keeper, Metric, 8 mm - 22 mm, 15-Piece | 18792 - Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off. Combination wrench set is a complete series of every size from 8 to 22 mm. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces.

High-contrast permanent laser etched size markings are easy-to-read, even in low light.

More information about Michigan Industrial Tools 18792


Similar products



TEKTON 3/8-Inch Drive Deep Impact Socket Set, Metric, Cr-V, 6-Point, 7 mm - 19 mm, 13-Sockets | 47925


TEKTON 47925 - Short length and a slim body make it easy to operate in areas with limited room. Box end opening is designed to grip flat sides of fastener heads, not corners, to prevent round-off. 47925 features: -Material: Chrome vanadium steel. High-torque and 6 point socket design grips flat sides of fasteners, not just corners and preventing round-off.

12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off.

TEKTON 3/8-Inch Drive Deep Impact Socket Set, Metric, Cr-V, 6-Point, 7 mm - 19 mm, 13-Sockets | 47925 - Meets or exceeds ANSI performance standards. Drop forged and heat treated. Includes two store-and-Go Keepers with space-saving folding handles and nonslip grippers to lock in wrenches. Made of premium chrome vanadium steel with a mirror chrome finish. Short length and a slim body make it easy to operate in areas with limited room.

Includes store-and-go Keeper with space-saving folding handle and nonslip grippers to lock in wrenches. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. High-contrast permanent laser etched size markings are easy-to-read, even in low light.

More information about TEKTON 47925


Similar products



TEKTON WRN57071 Flex-Head Ratcheting Combination Wrench Set with Store and Go Keeper, Inch, 1/4-Inch -1-Inch, 13-Piece


TEKTON WRN57071 - To prevent round-off, the box end opening contacts and applies force to the flat sides of fastener heads rather than the corners. High-contrast permanent laser etched size markings are easy-to-read, even in low light. High-contrast permanent laser etched size markings are easy-to-read, even in low light. Meets or exceeds ANSI performance standards.

Wrn570131 3/4 in. Wrn570091 1/2 in. High-torque, not just the corners, 6-point socket design grips the flat sides of fasteners, preventing round-off. Shallow socket depth provides access to fasteners in tight spaces. It is free to move with each stroke, allowing the wrench to navigate around obstructions along the swing path.

TEKTON WRN57071 Flex-Head Ratcheting Combination Wrench Set with Store and Go Keeper, Inch, 1/4-Inch -1-Inch, 13-Piece - Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Includes store-and-go Keeper with space-saving folding handle and nonslip grippers to lock in wrenches. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. Wrn570061 3/8 in.

Meets or exceeds ANSI performance standards. Box end head pivots 180 degrees to easily get around obstructions.

More information about TEKTON WRN57071


Similar products



GEARWRENCH 9570 7 Piece SAE Stubby Flex-Head Combination Ratcheting Wrench


GearWrench 9570 - Made of premium chrome vanadium steel with a mirror chrome finish. 6-point box end snugly fits hex-shaped fastener heads, not corners, gripping the flat sides, to prevent round-off.72-tooth ratchet gear needs only a 5-degree working swing arc. Short length and a slim body make it easy to operate in areas with limited room.

Stubby wrench beam allows you access into tight areas that a standard flex head will not. 7 pc. Box end opening is designed to grip flat sides of fastener head, not corners, to prevent round-off. Sae stubby flex head set includes - 3/8", 9/16", 7/16", 5/8", 1/2", 11/16" & 3/4". Flex head tilts up to 180 degrees at any interval.

GEARWRENCH 9570 7 Piece SAE Stubby Flex-Head Combination Ratcheting Wrench - Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers. Box end head pivots 180 degrees to easily get around obstructions. 12-point box end doubles the access angles of a 6-point and is offset 15 degrees to create clearance for fingers.

Includes store-and-go Keeper with space-saving folding handle and nonslip grippers to lock in wrenches. Includes store-and-go Keeper with space-saving folding handle and nonslip grippers to lock in wrenches.

More information about GearWrench 9570


Similar products



Powerbuilt 2 Piece Stubby Ratchet Handle Set, 72 Tooth, 1/4-Inch, 3/8-Inch Drive


Powerbuilt 640927 - Ratcheting box-end needs as little as 5 degrees to move fastener VS. Meets or exceeds ANSI performance standards. Store-and-go wrench Keeper with folding handle and nonslip grippers locks wrenches in place. Includes two store-and-Go Keepers with space-saving folding handles and nonslip grippers to lock in wrenches.

Includes 1/4-in. Sae stubby flex head set includes - 3/8", 9/16", 5/8", 1/2", 7/16", 11/16" & 3/4". Flex head tilts up to 180 degrees at any interval. Made from forged and heat treated chrome vanadium steel with a corrosion-resistant black phosphate finish. Adjustable set screw allows you to set desired head tension.

Powerbuilt 2 Piece Stubby Ratchet Handle Set, 72 Tooth, 1/4-Inch, 3/8-Inch Drive - Box end head pivots 180 degrees to easily get around obstructions. The company's mission statement: alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers' expectations of quality, service and value, while achieving profits to ensure the Company's and its employees' future growth and development.

Chrome vanadium steel construction. 72 tooth reversible quick release mechanisms. Open end is angled 15 degrees so the wrench can be flipped over to engage fasteners twice as often in tight spaces. Made of premium chrome vanadium steel with a mirror chrome finish. Drive and 3/8-inch drive stubby ratchets.

More information about Powerbuilt 640927


Similar products