Black – Compatible With Almost All 3D Printers And 3D Pens – Monoprice Select ABS Plus+ Premium 3D Filament  1kg 1.75mm 

#ad
#ad
Monoprice 115848 #ad - Reel dimensions: reel diameter: 200mm 7. 9" | spindle Diameter: 54mm 2. 1" | reel width: 66mm 2. 1". Get outstanding 3D printing results when you use 1. 75mm abs plus+ 3d printer filament from monoprice! ABS Plus+ is an upgrade of ordinary ABS filament, which is one of the most commonly used filament types in 3D printing.

Has a high moisture absorption rate. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with silica gel and/or an active dehumidifier to reduce the amount of moisture it can absorb. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pockets in the extrusion.

Black - Compatible With Almost All 3D Printers And 3D Pens - Monoprice Select ABS Plus+ Premium 3D Filament  1kg 1.75mm  #ad - It is 40 percent stronger than ordinary ABS filament and has good overall toughness. It is best to ensure that the printing room is well ventilated when using ABS. Abs plus+ premium 3D filament, 1kg 1. 75mm. It is 40 percent stronger than ordinary ABS filament and has good Overall toughness. Additionally, it has a high moisture absorption rate.

It has a nominal processing temperature of 210 ~ 240°c 410 ~ 464°f. The negatives of using aBS Plus+ is that it can give off a white smoke with a concentrated odor.

More information about Monoprice 115848 #ad

Gulfcoast Robotics Y Carriage Plate Upgrade for Maker Select and Wanhao Duplicatior i3 3D Printers

#ad
#ad
Gulfcoast Robotics #ad - Brushed and anodized. Allows 3 x linear bearing configuration as well as 4 x bearing configuration. Has additional provisioning hole for 3 point level adjustment of build surface. Compatible with maker select and Wanhao Duplicator V1, V2, V2. 1 and plus 3D Printers. We have different Y carriage plates for other 3D Printers in our online store.

Package contents 1 x anodized Aluminum Carriage Plate for Maker Select and Wanhao Duplicator 3D Printers. Maker select y carriage plate features: Drop in replacement for Wanhao Duplicator i3 and Monoprice Maker Select, V2, V2. 1 and Plus. High quality production, manufactured by USA Company. Drop-in replacement for stock Y carriage, requires no modification.

Gulfcoast Robotics Y Carriage Plate Upgrade for Maker Select and Wanhao Duplicatior i3 3D Printers #ad - Made of stiff, tempered 6061-T6 Aluminum Alloy. Please note that this product was designed only for Wanhao Duplicator, Maker Select and similar 3D Printers with 140mm distance between Y rods. Brushed, anodized 6061-T6 tempered aluminum alloy plate 3mm thick. Supports 3 point level adjustment for heated beds.

Do not use this product for typical Prusa i3 like 3D Printer with 170mm Y rods distance.

More information about Gulfcoast Robotics #ad


Similar products



HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black

#ad
#ad
HATCHBOX 3D PLA-1KG1.75-BLK #ad - Made of stiff, tempered 6061-T6 Aluminum Alloy. Brushed and anodized. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm. Compatible with maker select and Wanhao Duplicator V1, V2, V2. 1 and plus 3D Printers. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Spool diameter: 7. 88" - spool width: 2.

69" - spool hub Hole Diameter: 2. 20". High quality production, manufactured by USA Company. 1 kg approximately 2. 20 lbs Spool. Because of the lower melting temperatures and lack of warping, PLA filaments retain their color vibrancy and are a common choice for displays or small household prints. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F.

HATCHBOX PLA 3D Printer Filament, Dimensional Accuracy +/- 0.03 mm, 1 kg Spool, 1.75 mm, Black #ad - Drop-in replacement for stock Y carriage, requires no modification. The 3d printed object will have a glossy type finish with we love it: Less warping Easy to use No heated bed required. Welcome to hatchbox 3d products our engineered filament is here to help you stream your creative outlet, enabling you to see your thoughts and concepts engineered into a real and rewarding reality.

Supports 3 point level adjustment for heated beds.

More information about HATCHBOX 3D PLA-1KG1.75-BLK #ad


Similar products



Monoprice Maker Select Plus 3D Printer

#ad
#ad
Monoprice 115711 #ad - Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Compatible with Cura, Repetier, and other software. Made of stiff, tempered 6061-T6 Aluminum Alloy. Heated aluminum build plate nozzle cooling fan for printing all filament types. 1 kg approximately 2. 20 lbs Spool. If you're ready to take your ideas and designs from paper or cad file to the next level, the monoprice maker selecT 3D Printer is the perfect starter solution for your needs! Unlike kit-based printers, and time to assemble, experience, which require a certain level of knowledge, the MAKER SELECT 3D Printer is assembled using only 6 screws and includes everything you need to begin printing right out of the box.

Ready to print include sample pla filament and a microsd card with preinstalled models, Build area 7. 9 x 7. 9 x 7. 1 inches, printer frame dimensions 15. 7 x 16. 1 x 15. 7 inches. Compatible with maker select and Wanhao Duplicator V1, V2, V2. 1 and plus 3D Printers.

More information about Monoprice 115711 #ad


Similar products



Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Wanhao i3

#ad
#ad
Micro Swiss LLC M2560-04 #ad - Stainless steel was used for thermal break because it offers low thermal conductivity, and aluminum was used for the upper portion because it has a lot better thermal conductivity, to carry away any heat from the filament. Heated aluminum build plate nozzle cooling fan for printing all filament types. Step by step installation instruction https://store.

Micro-swiss. Com/pages/micro-swiss-all-metal-hotend Compatible with maker select and Wanhao Duplicator V1, V2, V2. 1 and plus 3D Printers. 1 kg approximately 2. 20 lbs Spool. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Complete kit with sample PLA filament, bed scraper, and MicroSD card with preloaded model files.

Micro Swiss All Metal Hotend with SLOTTED Cooling Block for Wanhao i3 #ad - Supports 3 point level adjustment for heated beds. Kit includes: modified thermal Barrier Tube, Modified Plated Nozzle and Slotted Cooling block. Micro usb and MicroSD card connectivity. With fast extrusion rate, PTFE tube doesn't have enough thermal conductivity to properly melt all the plastic coming out.

More information about Micro Swiss LLC M2560-04 #ad


Similar products



3D Solutech Natural Clear 1.75mm 3D Printer PLA Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS 1.0KG

#ad
#ad
3D Solutech ST175CLPLA #ad - Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20". Supports 3 point level adjustment for heated beds. Heated aluminum build plate nozzle cooling fan for printing all filament types. 1 kg approximately 2. 20 lbs Spool. Our filament is always round, with no oily residue, no air bubbles, no kinks or breaks.

3D Solutech Natural Clear 1.75mm 3D Printer PLA Filament, Dimensional Accuracy +/- 0.03 mm, 2.2 LBS 1.0KG #ad - Compatible with Cura, Repetier, and other software. Fits: wanhao i3, monoprice maker Select 3D Printer v2, Cocoon Create 3D Printer. Quality is our top priority as we hand checked each spool, vacuum sealed and packaged. Ready to print include sample pla filament and a microsd card with preinstalled models, Build area 7.

9 x 7. 9 x 7. 1 inches, printer frame dimensions 15. 7 x 16. 1 x 15. 7 inches. 1. 75mm filament diameter Dimensional Accuracy +/- 003mm.

More information about 3D Solutech ST175CLPLA #ad


Similar products



Cleaning Filament - Compatible With Almost All 3D Printers And 3D Pens - Monoprice Premium 3D Printer Filament 1.75MM 0.1kg/spool

#ad
#ad
Monoprice 112504 #ad - Compatible with maker select and Wanhao Duplicator V1, V2, V2. 1 and plus 3D Printers. 4mm nozzle plated with high lubricity wear rESISTANT TwinClad XT Coating. To clean using this filament, simply print about 12" of material. It is also good to clean when switching filament colors or material types. Kit includes: modified thermal Barrier Tube, Modified Plated Nozzle and Slotted Cooling block.

Supports 3 point level adjustment for heated beds. Recommended extrusion/nozzle temperature 180°C - 210°C 356°F - 410°F. Brushed and anodized. Made of stiff, tempered 6061-T6 Aluminum Alloy. 1 kg approximately 2. 20 lbs Spool. Ready to print include sample pla filament and a microsd card with preinstalled models, Build area 7.

Cleaning Filament - Compatible With Almost All 3D Printers And 3D Pens - Monoprice Premium 3D Printer Filament 1.75MM 0.1kg/spool #ad - 9 x 7. 9 x 7. 1 inches, printer frame dimensions 15. 7 x 16. 1 x 15.

More information about Monoprice 112504 #ad


Similar products



Monoprice 113860 Maker Select 3D Printer v2 with Large Heated 8" x 8" x 7" Build Plate, Ready To Print, Sample PLA Filament, 4GB MicroSD Card Preloaded with printable 3D Models.

#ad
#ad
Monoprice 113860 #ad - Micro usb and MicroSD card connectivity. High quality production, manufactured by USA Company. Ready to print include sample pla filament and a microsd card with preinstalled models, Build area 7. 9 x 7. 9 x 7. 1 inches, printer frame dimensions 15. 7 x 16. 1 x 15. 7 inches. Pc and Mac compatible. Made of stiff, tempered 6061-T6 Aluminum Alloy.

Monoprice 113860 Maker Select 3D Printer v2 with Large Heated 8" x 8" x 7" Build Plate, Ready To Print, Sample PLA Filament, 4GB MicroSD Card Preloaded with printable 3D Models. #ad - For common 3d printers such as makerbot, afinia, solidoodle 2, flash forge, Mendel, printrbot lc, up, RepRap, makergear m2 and etc. Temperature range is 190 degree C - 220 degree C. Slotted clamping system, No set screw to ding and damage thermal tube, Significantly better heat transfer. With the ability to print any type of 3d filament and a price point lower than most diy kits, this entry-level 3d printer is the easiest and least expensive way to join the 3D printing revolution! Includes 2GB micro SD card preloaded with printable 3D models out of the box Includes sample PLA filament so you can print right out of the box Heated build plate allows for high-reliability printing of slow cooling materials, such as Cure, such as ABS Can use compatible software, or Simplify 3D Expanded user's manual with detailed, Repeater, easy-to-follow assembly and usage instructions Tighten just 6 screws and be printing in 10 minutes Choose to give the innovative and creative gift of learning.

Includes heated build plate, repeater, the maker select is compatible with windows, 2 Gb Micro Sd Card and Sample PLA Filament. To clean using this filament, simply print about 12" of material. Supports 3 point level adjustment for heated beds.

More information about Monoprice 113860 #ad


Similar products



BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer

#ad
#ad
BIQU #ad - Completely solve the hot bed power is too large and the load current issue. It prints at a wide 160 ~ 260C temperature range. Micro sd card slot: use a micro sd card to store sliced g code files, tpc, foam, pla, fpe, hips, pva, jelly, pet, xt copolyester, then plug the card into the micro SD card slot to print without the need to connect to a Windows or Mac PC.

BIQU Heat Bed Power Module Expansion Hot Bed MOS Tube for 3D Printer #ad - Check the original model file. Ready to print include sample pla filament and a microsd card with preinstalled models, Build area 7. 9 x 7. 9 x 7. 1 inches, printer frame dimensions 15. 7 x 16. 1 x 15. 7 inches. 4mm nozzle plated with high lubricity wear rESISTANT TwinClad XT Coating. Heated aluminum build plate nozzle cooling fan for printing all filament types.

Supports 3 point level adjustment for heated beds. Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20".

More information about BIQU #ad


Similar products



400mm x 205mm x 0.5mm Silicone Thermal Pad for CPU GPU Heatsink

#ad
#ad
Gino 58 #ad - Size : 40 x 205cm/15. 7'' x 8. 1'' l*w. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. High quality production, manufactured by USA Company. For common 3d printers such as makerbot, solidoodle 2, Mendel, afinia, up, RepRap, flash forge, printrbot lc, makergear m2 and etc. Temperature range is 190 degree C - 220 degree C.

Package content : 1 x CPU Thermal Pad. Made in usa by Micro Swiss. Made in the USA. Ready to print include sample pla filament and a microsd card with preinstalled models, Build area 7. 9 x 7. 9 x 7. 1 inches, printer frame dimensions 15. 7 x 16. 1 x 15. 7 inches. Product name : cpu Thermal Pad;Material : Silicone. Complete kit with sample PLA filament, bed scraper, and MicroSD card with preloaded model files.

400mm x 205mm x 0.5mm Silicone Thermal Pad for CPU GPU Heatsink #ad - Completely solve the hot bed power is too large and the load current issue. 4mm nozzle plated with high lubricity wear rESISTANT TwinClad XT Coating. It is a good idea to periodically clean the nozzles and extruders on your 3D printer to ensure that they feed filament smoothly and evenly.

More information about Gino 58 #ad


Similar products



eSUN 3D 1.75mm PETG Black Filament 1kg 2.2lb, PETG 3D Printer Filament, 1.75mm Solid Opaque Black

#ad
#ad
ESUN PETG175SB1 #ad - Extruder temp- 500°F 260°C. Currently work with the Anet A8. Ready to print include sample pla filament and a microsd card with preinstalled models, Build area 7. 9 x 7. 9 x 7. 1 inches, printer frame dimensions 15. 7 x 16. 1 x 15. 7 inches. 1. 75mm see through natural clear pla filament. Esun petg 3d printer filament vacuumed sealed with desiccant; 16 colors to choose from; semi-Transparent Colors: blue, natural, solid gold, solid blue, green, solid yellow, magenta, yellow, solid red, solid gray, solid green, solid white, orange; Solid Opaque Colors: solid black, solid purple, solid silver.

1. 75mm filament diameter Dimensional Accuracy +/- 005mm. Pla polylactic acid 3d Printer Filament Vacuumed Sealed With Desiccant. Micro sd card slot: use a micro sd card to store sliced g code files, pet, pla, xt copolyester, fpe, pva, foam, jelly, hips, tpc, then plug the card into the micro SD card slot to print without the need to connect to a Windows or Mac PC.

eSUN 3D 1.75mm PETG Black Filament 1kg 2.2lb, PETG 3D Printer Filament, 1.75mm Solid Opaque Black #ad - Spool diameter: 7. 88" - spool width: 2. 69" - spool hub Hole Diameter: 2. 20".

More information about ESUN PETG175SB1 #ad


Similar products