Crazepony 4pcs 6x15mm Motor Speed: Faster 17500KV TW Special Sauce Edition for Blade Inductrix Tiny Whoop with Micro JST 1.25 Plug Bonus Rubber Rings

#ad
#ad
Crazepony #ad - Description:motor diameter: 6mmMotor Length: 15mmShaft Diameter: 08mmcable length: 56mmWeight: About 1. 8gno load speed: 65000±15% rpmrated load speed: 38500±15% rpmMotor wire: Clockwise MotorWith Red Blue, Anti-clockwise MotorWith Black WhiteOption: With 1. 25mm jst plugquantity: 4 pcs 2 cw and 2 ccwWork for Blade Inductrix, Tiny Whoop, Nano QX etc.

Package including2 * cW motor2 * CCW motor Bonus rubber rings. Work for blade inductrix, Tiny Whoop, Nano QX etc. Motor diameter: 6mm, motor length: 15mm, With 1. 25mm jst Plug. Special sauce edition 17500kv @3. 7v / 65, 000 rpm. Weight: about 1. 8g, quantity: 4 pcs 2 CW and 2 CCW.

More information about Crazepony #ad

Blade Main Frame: Inductrix

#ad
#ad
Horizon Hobby BLH8706 #ad - Blade main frame: inductrix, BLH8706 Main frame: Inductrix.

More information about Horizon Hobby BLH8706 #ad


Similar products



Crazepony Mini Quadcopter Frame Kit with Props Removal Tool for Tiny Whoop Eachine E010 JJRC H36 Quadcopter

#ad
#ad
Crazepony #ad - Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter. Flight components will fit without modifications required. Frame wheelbase: 67mm, Frame weight: 5g. Mini quadcopter frame kit with props removal tool for tiny whoop eachine e010 jjrc h36 quadcopterdescription:frame wheelbase: 67mmmaterial: pvcpropeller color: redquantity: 1pc quadcopter frame, 8pcs 4-leaf red propellers, 2pcs Foam Battery Compartment Adaptors random color and1pcs Removal ToolUsage: for Tiny Whoop, Eachine E010 or JJRC H36--------------------Package Including1 * Micro Quadcopter Frame Black8 * 4-leaf red propellers 2 * Foam Battery Compartment Adaptors random color 1 * Props Removal Tool Main frame: Inductrix.

. Including 1pc quadcopter frame, 8pcs 4-leaf red propellers, 2pcs Foam Battery Compartment Adaptors random color and 1pcs Props Removal Tool. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv.

More information about Crazepony #ad


Similar products



Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector

#ad
#ad
Crazepony #ad - Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. This battery will give you higher rpms more power and a considerably longer flight time. High density with great safety fits tiny whoop--------------------Package Including4 * 230mAh HV 1S Lipo Battery 30C 3. 8v jst-ph 2. 0 connector Main frame: Inductrix.

Dimension: 54mm * 12. 5mm * 6mm, Weight: 6. 3g/per unit. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter. The connector plug: jst-ph2. 0 aka high current ultra micro, Powerwhoop, mCPX. Including 1pc quadcopter frame, 8pcs 4-leaf red propellers, 2pcs Foam Battery Compartment Adaptors random color and 1pcs Props Removal Tool.

Crazepony 4pcs 230mAh HV 1S Lipo Battery 30C 3.8V for Tiny Whoop Blade Inductrix JST-PH 2.0 Connector #ad - Frame wheelbase: 67mm, Frame weight: 5g. Tiny whoop Blade inductrix future choice of battery. Flight components will fit without modifications required. Capacity: standard voltage 4. 2v, 230mahor High voltage 4.

More information about Crazepony #ad


Similar products



TATTU 5pcs 3.7V 220mAh LiPo Battery Pack 45C 1S with Ultra Micro for Blade Inductrix Tiny Whoop FPV Nano QX Nano CPX Nano CPS in The E-flite Micro Planes

#ad
#ad
Tattu #ad - With the effort of 200 professional engineers and technicians, RC boats, RC helis, RC planes, Tattu always provides batteries with exquisite technology for various RC Models such as RC cars, etc. Flight components will fit without modifications required. Tiny whoop Blade inductrix future choice of battery.

Use professional battery charger. Parameter: weight: 001lb; dimensionlxwxh: 2x047x024in; connector, eflite Stock Connector / Ultra Micro. 2. Automatic stacking technology, better performance 3. Strict matching progress, excellent consistency 4. Up to 200wh/kg energy density 5. Long cycle life 150 times minimum NOTICE: Please read the instruction carefully before using or charging the battery.

TATTU 5pcs 3.7V 220mAh LiPo Battery Pack 45C 1S with Ultra Micro for Blade Inductrix Tiny Whoop FPV Nano QX Nano CPX Nano CPS in The E-flite Micro Planes #ad - Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Check carefully the battery condition before using or charging. Details: brand: tattu CapacitymAh: 220mAh VoltageV: 3. 7v discharge rate c: 45c max burst discharge Rate C: 90C Configuration: 1S1P Net Weightdev.

More information about Tattu #ad


Similar products



BETAFPV 3PCS Tiny Whoop Frame Stiffener Brace of Carbon Fiber for Beta65 Frame

#ad
#ad
BETAFPV #ad - Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Description: The struts between the motor mounts and ducts are fragile. Including 1pc quadcopter frame, 8pcs 4-leaf red propellers, 2pcs Foam Battery Compartment Adaptors random color and 1pcs Props Removal Tool.

This tiny piece of carbon fiber slides onto the bottom of your Tiny Whoop and stiffens the airframe. This carbon fiber need to be installed with a lot of effort, but the struts between the motor mounts and ducts are fragile,so be careful not to damage the struts when you install them. Flight components will fit without modifications required.

BETAFPV 3PCS Tiny Whoop Frame Stiffener Brace of Carbon Fiber for Beta65 Frame #ad - Please note: this set is only fit for beta65 frame of 6x15mm motors, NOT fit for the black Echine frame/ e010 frame/ Beta65S/ Beta75 frame for the moment. This one fits for our beta65 frame not the beta65s frame. Fit for clear original stock frame of Blade Inductrix Tiny Whoop. Package: 3 * tiny whoop frame Stiffener Brace of Carbon Fiber Main frame: Inductrix.

Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv.

More information about BETAFPV #ad


Similar products



Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc

#ad
#ad
Crazepony SCNEW-03032 #ad - Parameter: weight: 001lb; dimensionlxwxh: 2x047x024in; connector, eflite Stock Connector / Ultra Micro. Including 1pc quadcopter frame, 8pcs 4-leaf red propellers, 2pcs Foam Battery Compartment Adaptors random color and 1pcs Props Removal Tool. Applications: specially designed for tiny whoop, umx t-28, whipit, umx radian, blade mcx2, nano cpX, blade nano qx, sport cub s, Champ, eachine e010, Blade MSR, Night Vapor, eachine e010 whoop-e, UMX Corsair, Blade mCX, Blade Inductrix, mCPX.

What you get: tattu lipo battery pack with Ultra Micro Connector & Local after-sales service located in Dublin, CA. Quickly recharged, long cycle life 150 times minimum, up to 200Wh/kg energy density. The connector plug: jst-ph2. 0 aka high current ultra micro, Powerwhoop, mCPX. Flight components will fit without modifications required.

Crazepony FPV Micro AIO Camera 5.8G 48CH 25mW Transmitter with Y Splitter for FPV Drone like Blade Inductrix etc #ad - . Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. This carbon fiber need to be installed with a lot of effort, but the struts between the motor mounts and ducts are fragile,so be careful not to damage the struts when you install them. Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter.

More information about Crazepony SCNEW-03032 #ad


Similar products



BETAFPV 4 Sets 31mm 3-Blade Props 0.8mm Shaft for 615 Motor Tiny Whoop Quad Like Beta65

#ad
#ad
BETAFPV #ad - Including 1pc quadcopter frame, 8pcs 4-leaf red propellers, 2pcs Foam Battery Compartment Adaptors random color and 1pcs Props Removal Tool. Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Flight components will fit without modifications required. The connector plug: jst-ph2. 0 aka high current ultra micro, Powerwhoop, mCPX.

Miniature and light weight design. Compatible with 6x15mm brushed motors, recommend 17500kv or 19000kv. Random color in red, White, Yellow, Pink, Blue. Betafpv 4 sets 3-blade props for tiny whoop quad 3-blade props are an available alternative to the stock propellers! They fit perfectly into your stock Tiny Whoop frame or any other TW frame made for 6mm motors.

BETAFPV 4 Sets 31mm 3-Blade Props 0.8mm Shaft for 615 Motor Tiny Whoop Quad Like Beta65 #ad - These work terrific and cost a lot less than the original props. Suitable for tiny whoop, eacHINE E010 and other DIY micro quadcopter. Only 0225g and lighter than the 4-blades props 03g. Only 07 grams per piece.

More information about BETAFPV #ad


Similar products



Crazepony 16pcs 31mm Propeller 3-blade Props and 1pcs Props Removal Tool for Coreless Brushed Motors Mini FPV Racing Drones Multirotors Quadcopters

#ad
#ad
Crazepony #ad - Capacity: standard voltage 4. 2v, 230mahor High voltage 4. 35v, 250ish mah. Applications: specially designed for tiny whoop, umx corsair, blade inductrix, eachine e010 whoop-e, Champ, Whipit, Blade MSR, blade nano qx, sport cub s, Blade mCX2, eachine e010, Blade mCX, UMX Radian, Nano CPX, umx t-28, Night Vapor, mCPX.

What you get: tattu lipo battery pack with Ultra Micro Connector & Local after-sales service located in Dublin, CA. Please note: this set is only fit for beta65 frame of 6x15mm motors, NOT fit for the black Echine frame/ e010 frame/ Beta65S/ Beta75 frame for the moment. This one fits for our beta65 frame not the beta65s frame.

Crazepony 16pcs 31mm Propeller 3-blade Props and 1pcs Props Removal Tool for Coreless Brushed Motors Mini FPV Racing Drones Multirotors Quadcopters #ad - Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14. 8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch.

8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information.

More information about Crazepony #ad


Similar products



Blade Prop Set 4 White: Inductrix

#ad
#ad
Horizon Hobby BLH8705 #ad - Only 07 grams per piece. Random color in red, Yellow, White, Pink, Blue. Weight: 0225g. Tiny whoop Blade inductrix future choice of battery. Fpv micro aio camera 5. 8g 48ch 25mw transmitter with micro jsT 1. 25 to 2 pin wafer cable 1. 5cm y splitter for tiny whoop Blade Inductrix. Light weight only 3. 6g, small size with 47 * 14.

8 * 12. 5 mm. Supporting touch switch select channel Frequency group, Supporting NTSC/PAL switch, Support vertical inverted image switch. 8led display channel and 6leds display frequency group information, 1LED display PAL/NTSC and FLIP information. Wide lens angle. Prop set, white 4: Inductrix. Only 0225g and lighter than the 4-blades props 0

Blade Prop Set 4 White: Inductrix #ad - 3g. Applications: specially designed for tiny whoop, umx radian, night vapor, whipit, blade msr, umx t-28, Blade mCX, Champ, UMX Corsair, eachine e010, eachine e010 whoop-e, Blade Inductrix, Nano CPX, sport cub s, Blade mCX2, blade nano qx, mCPX. What you get: tattu lipo battery pack with Ultra Micro Connector & Local after-sales service located in Dublin, CA.

Frame wheelbase: 67mm, Frame weight: 5g.

More information about Horizon Hobby BLH8705 #ad


Similar products



EUDAX 4 Sets 4-blade FPV Propeller Red / Blue CW CCW Props for Tiny Whoop Inductrix H36 E010 RC Micro Quadcopter

#ad
#ad
EUDAX #ad - This carbon fiber need to be installed with a lot of effort, but the struts between the motor mounts and ducts are fragile,so be careful not to damage the struts when you install them. Only 07 grams per piece. Tiny whoop Blade inductrix future choice of battery. Usage: for eachine e010, Blade Inductrix, H36.

Newly developed chemistry HV 1S Battery, high voltage gets longer lifetime and safer charging situation. Applications: specially designed for tiny whoop, night vapor, nano cpx, blade inductrix, umx radian, sport cub s, Champ, Blade mCX, Whipit, blade nano qx, UMX Corsair, Blade MSR, Blade mCX2, eachine e010, umx t-28, eachine e010 whoop-e, mCPX.

EUDAX 4 Sets 4-blade FPV Propeller Red / Blue CW CCW Props for Tiny Whoop Inductrix H36 E010 RC Micro Quadcopter #ad - What you get: tattu lipo battery pack with Ultra Micro Connector & Local after-sales service located in Dublin, CA. Smaller inertia and more power violent. Random color in red, Pink, White, Yellow, Blue. Weight: 0225g. For tiny whoop, blade Inductrix and other DIY micro FPV drone. These props is fit for Tiny Whoop airframe with 6x15mm motors.

16pcs of betafpv 31mm 3-blade Props 08mm shaft for Tiny Whoop.

More information about EUDAX #ad


Similar products