Genuine Jeep Accessories 82208453AB Hitch Receiver Plug

Oem quality. With Jeep logo. Includes a retention strap, four-way wiring plug holder and a Jeep, RAM, Fiat or Mopar logo. Fits 2 inch hitch receiver. Made from santoprene material, crack, harden, the hitch plug will not shrink, chalk or discolor. Receiver plugs protect your vehicle's hitch opening from the elements.

Fits: 2007-2012 liberty, 2004-2006 Wrangler unlimited.

---

CURT 13172 Class 3 Trailer Hitch

And the tongue weight capacity to 750 lbs. And a comparable tongue weight capacity of 750 lbs. One special feature about the class 3 that is not found in classes 1 or 2 is its compatibility with a weight distribution hitch. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear.

Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty. The curt class 3 trailer hitch is the most common type of trailer hitch installed on full-size pickup trucks and SUVs. It is designed to be a custom-fit trailer hitch for certain years of the Jeep Cherokee to verify your vehicle compatibility, see the CURT application guide at curtmfg.

Com. Note: never exceed the lowest weight capacity of any towing component. Curt class 3 trailer hitches are engineered to be strong and capable, having a quality steel frame and a solid finish. When used in combination with a WD hitch, this class 3's gross trailer weight capacity increases to 6, 000 lbs. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet.

Made with a vehicle-specific design for a custom fit.


Similar products

---

Genuine Chrysler 56055632AC 7-Way Trailer Connector

7 way trailer tow wiring harness connector chrysler aspen 2007, 2015, 2017 ram 1500 2014, 2013, 2012, 2016 ram 2500 2014, 2016, 2016 ram 3500 2014, 2015, 2016, 2008, 2014, 2008, 2012, 2016, 2014, 2015, 2013, 2009, 2017 dodge magnum 2011 dodge ram 2500 2016 dodge wd75 2011 Jeep Cherokee 2014, 2017 Jeep Grand Cherokee 2011, 2009 Dodge Durango 2007, 2016 Made with a vehicle-specific design for a custom fit.

Tested for safety in accordance with SAE J684. Co-cured in a rust-resistant liquid Bonderite coating. Precisely welded for superior strength and fit. Protected by a durable high-gloss black powder coat finish. Use to replace a damaged connector or for vehicles pre-wired with trailer two from the factory.


Similar products

---

Rugged Ridge 11580.51 Black Receiver Hitch Kit with Wiring Harness for 2007-2018 Jeep Wrangler JK and JKU

Durable powder coat design sheds water and provides a long lasting rust free finish. Precisely welded for superior strength and fit. Built to match the tow capacity of your Jeep. Includes cutout for factory wiring harness mounting. Made with a vehicle-specific design for a custom fit. Similar to OE Design. Designed as a one-piece welded assembly for added strength, 200-lb tongue weight rating, we built our hitch receiver to match the towing capacity of your Jeep: 3, 350-lb tongue weight rating with weight distributing equipment; otherwise 2000-lb tow rating, 500-lb tow rating, 2 inch opening.

We built our hitch receiver to match the towing capacity of your Jeep: 3, 500-lb tow rating. Co-cured in a rust-resistant liquid Bonderite coating. One pieces welded for added strength. Includes wiring harness. Custom design bolts directly to factory mounting points on the rear of the vehicle, very similar design to the OE Receiver Hitch.

Use to replace a damaged connector or for vehicles pre-wired with trailer two from the factory. 2 inch receiver. Tested for safety in accordance with SAE J684.


Similar products

---

Draw-Tite 75699 Max-Frame Receiver

All-frame attachment, solid all-Welded Construction, with A-Coat Base with Black Powder Coat Finish. Round tube Receiver Complement Vehicle Appearance. Welded construction For Maximum Strength/Safety. Precisely welded for superior strength and fit. All frame Attachments. Custom built To Ensure Perfect Fit. 2" square Receiver Tube Opening.

Designed to withstand Road Abuse Within Capacities. Co-cured in a rust-resistant liquid Bonderite coating. One pieces welded for added strength. Includes wiring harness. Max-frame receivers are designed for trucks, vans and sport utility vehicles. Limited Lifetime Warranty. 2 inch receiver. Rated up to 5000 pounds gtw weight carrying WC, Rated up to 7500 pounds GTW Weight Distributing WD.

Built to match the tow capacity of your Jeep. Tested for safety in accordance with SAE J684. Made with a vehicle-specific design for a custom fit. We built our hitch receiver to match the towing capacity of your Jeep: 3, 500-lb tow rating. Similar to OE Design.


Similar products

---

CURT 13432 Class 3 Trailer Hitch

It comes with all necessary hardware for a complete installation. The 2" x 2" receiver tube opening of this class 3 hitch is able to accept a hitch-mounted accessory, including utility trailers, such as a bike rack or cargo carrier, single-horse livestock trailers, or a ball mount to tow most standard size trailers, boat trailers and large campers.

Made with a vehicle-specific design for a custom fit. Co-cured in a rust-resistant liquid Bonderite coating. Max-frame receivers are designed for trucks, vans and sport utility vehicles. And the tongue weight capacity to 400 lbs. Protected by a durable high-gloss black powder coat finish. When used in combination with a WD hitch, this class 3's gross trailer weight capacity increases to 4, 000 lbs.

One pieces welded for added strength. Includes wiring harness. Co-cured in a rust-resistant liquid Bonderite coating. It is also found on full-size cars, crossover SUVs, minivans and mid-size trucks. All-frame attachment, solid all-Welded Construction, with A-Coat Base with Black Powder Coat Finish. Made with a vehicle-specific design for a custom fit.




Similar products

---

2011-2014 JEEP GRAND CHEROKEE RECEIVER HITCH TOWING MOPAR OEM

2 inch receiver. Protected by a durable high-gloss black powder coat finish. Co-cured in a rust-resistant liquid Bonderite coating. Use to replace a damaged connector or for vehicles pre-wired with trailer two from the factory. Precisely welded for superior strength and fit. Made with a vehicle-specific design for a custom fit.

May require other items not supplied by Mopar. Adaptor and ball not included!!!! made with a vehicle-specific design for a custom fit. We built our hitch receiver to match the towing capacity of your Jeep: 3, 500-lb tow rating. One pieces welded for added strength. Includes wiring harness. Tested for safety in accordance with SAE J684.

Do not exceed rated tow capacity of vehicle stated in Owner`s Manual. Max-frame receivers are designed for trucks, vans and sport utility vehicles. All-frame attachment, solid all-Welded Construction, with A-Coat Base with Black Powder Coat Finish. Covered with twolayered, E-coated paint finish to resist rust.

Precisely welded for superior strength and fit. Part # 82212180 fits 2011-2014 jeep grand cherokee designed as a one-piece welded assembly for added strength over multiple piece designs, Mopar Hitch Receivers match your vehicle`s towing capacity.


Similar products

---

Tekonsha 118416 T-One Connector Assembly

T-one tow harness connectors require no splicing of vehicle wires, just locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harness. Precisely welded for superior strength and fit. From it's humble origins as a manufacturer of RV stairs and steps in 1964, Tekonsha has evolved to become a trusted name in towing safety.

Tekonsha 't-one', vehicle Specific Tow Harness Connectors require no splicing of vehicle wires. No special tools required. Protected by a durable high-gloss black powder coat finish. Co-cured in a rust-resistant liquid Bonderite coating. Smooth, primus, predictable stopping from all speeds has made the Tekonsha Prodigy, and Voyager trailer brake controls the best in class and the most popular brake controls on the market.

Tested for safety in accordance with SAE J684. Use to replace a damaged connector or for vehicles pre-wired with trailer two from the factory. 16 gauge bonded wire with 4-flat plug and cap; 7. 5 amp stop light/turn signal circuit capacity. We built our hitch receiver to match the towing capacity of your Jeep: 3, 500-lb tow rating.

Protected by a durable high-gloss black powder coat finish.


Similar products

---

CURT 13171 Class 3 Trailer Hitch

16 gauge bonded wire with 4-flat plug and cap; 7. 5 amp stop light/turn signal circuit capacity. Weatherproof, one-piece construction and a 'Factory' appearance - T-One Connectors look like part of the factory harness and simply store in the cargo area or under the rear bumper when not in use. Our hitches are our pride, and as such, we back them up with a limited lifetime warranty and a one-year finish warranty.

Co-cured in a rust-resistant liquid Bonderite coating. Custom built to manufacturer and Model Year Ensures Perfect Fit and Top Towing Performance. Rated up to 5000 pounds gtw weight carrying WC, Rated up to 7500 pounds GTW Weight Distributing WD. They are put through strenuous testing before being deemed ready for market and come with two coatings -- a liquid Bonderite coating and a powder coat in high-gloss black -- that cure together to form a strong resistance against rust, scratching, UV damage and other wear.

Built to match the tow capacity of your Jeep. And the tongue weight capacity to 750 lbs. That is because the class 3 packs the punch of a heavyweight hitch while still staying light on its feet. When used in combination with a WD hitch, this class 3's gross trailer weight capacity increases to 6, 000 lbs. Precisely welded for superior strength and fit.

T-one tow harness connectors require no splicing of vehicle wires, just locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harness.


Similar products

---

2014 to 2016 Jeep Cherokee Mopar Hitch Receiver 82213349AB

Protected by a durable high-gloss black powder coat finish. Tested for safety in accordance with SAE J684. Protected by a durable high-gloss black powder coat finish. Custom built to manufacturer and Model Year Ensures Perfect Fit and Top Towing Performance. One pieces welded for added strength. Includes wiring harness.

T-one tow harness connectors require no splicing of vehicle wires, just locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harness. Co-cured in a rust-resistant liquid Bonderite coating. Co-cured in a rust-resistant liquid Bonderite coating.

Similar to OE Design. Tested for safety in accordance with SAE J684. Weatherproof, one-piece construction and a 'Factory' appearance - T-One Connectors look like part of the factory harness and simply store in the cargo area or under the rear bumper when not in use. Tested for safety in accordance with SAE J684.

Protected by a durable high-gloss black powder coat finish. We built our hitch receiver to match the towing capacity of your Jeep: 3, 500-lb tow rating. Co-cured in a rust-resistant liquid Bonderite coating. Precisely welded for superior strength and fit.


Similar products

---

Reese Towpower 51195 Class III Custom-Fit Hitch with 2" Square Receiver opening

One pieces welded for added strength. Includes wiring harness. Co-cured in a rust-resistant liquid Bonderite coating. Co-cured in a rust-resistant liquid Bonderite coating. All-frame attachment, solid all-Welded Construction, with A-Coat Base with Black Powder Coat Finish. Rated up to 5000 pounds gtw weight carrying WC, Rated up to 7500 pounds GTW Weight Distributing WD.

Use to replace a damaged connector or for vehicles pre-wired with trailer two from the factory. Protected by a durable high-gloss black powder coat finish. Protected by a durable high-gloss black powder coat finish. T-one tow harness connectors require no splicing of vehicle wires, just locate your vehicle's wiring harness connector, unplug the connection and insert the T-One Connector into the vehicle's harness.

Each hitch is engineered and tested tough to deliver quality trailer hitch available. Please order bezel separately, parT # 82214562. Weatherproof, one-piece construction and a 'Factory' appearance - T-One Connectors look like part of the factory harness and simply store in the cargo area or under the rear bumper when not in use.

Looks and works great with full line of hitch accessories, including Draw-Tite's exclusive Interlock hitch ball and ball mount one-wrench tightening system. The metal shield process is an OEM compatible finish providing the best corrosion protection. Many no drill applications and metal shield protective coating for increased corrosion resistance and OEM quality protection.




Similar products