Jason Industrial 264-3M-06 HTB High Torque Synchronous Belt, Chloroprene, 1.417″ Top Width, 264 mm Length, 3 mm Tooth Pitch, 06 mm Wide

#ad
#ad
Jason Industrial 264-3M-06 #ad - Compound - Chloroprene. To overcome this disadvantage the High-Torque Belt HTB was developed using a more efficient tooth profile. Among the advantages are: Higher torque transmission at low speeds. Nylon tooth cover - Durability and wear resistance, increased power capacity. Higher resistance to tooth shear Less tooth wear due to friction.

Cord - fiberglass; Tooth Cover - Nylon. The standard trapezoidal tooth timing belt design performs poorly in in high-torque applications and high-power drives at lower speeds. High power transmission over a wide speed range. Oil, heat and ozone resistance; high tooth shear resistance. Improved meshing to reduce tooth jump.

Jason Industrial 264-3M-06 HTB High Torque Synchronous Belt, Chloroprene, 1.417" Top Width, 264 mm Length, 3 mm Tooth Pitch, 06 mm Wide #ad - Fiberglass tensile Cord - High dimensional stability and maximum flexibility.

More information about Jason Industrial 264-3M-06 #ad

D&D PowerDrive 210-3M-06 Timing Belt, 3M, 210 mL Length, Rubber

#ad
#ad
D&D PowerDrive 210-3M-06 #ad - The belts exceed USA RMA published ratings levels. Timing belt 3m 6 x 210 mm PL T70 Made in china. They are designed to perform at the identical or higher level than all other major USA Manufacturer's belts of the same Type. The helically wound tensile cords are specially engineered, twisted and chemically set stranded fiberglass material.

More information about D&D PowerDrive 210-3M-06 #ad


Similar products



Nema 17 Stepper Motor Bipolar 2A 59Ncm84oz.in 48mm Body 4-lead W/1m Cable and Connector for 3D Printer/CNC

#ad
#ad
OSM Technology Co.,Ltd. 17HS19-2004S #ad - Build with 1m cable and 01" pitch Connector. Holding torque: 59Ncm83. 6oz. In* rated Current/phase: 2. 0a* phase Resistance: 1. 4ohms* Inductance: 3. 0mh+/-20%1khz physical specification: * frame size: 42 x 42mm * body length: 48mm * shaft diameter: 5mm * shaft length: 24mm * d-cut length: 15mm * Number of Leads: 4 * Lead Length: 1m with connector * Weight: 390g Connection: BlackA+, GreenA-, RedB+, BlueB- Warning: Make sure the motor connect to a constant current or chopper drive controller before you test motor.

If you are a new buyer, please pay attention to our id is "STEPPERONLINE", and our P/N is "17HS19-2004S1". 59ncm83. 6oz. In holding torque. Made in china. This is an updated version nema 17 stepper motor with holding torque of 59Ncm83. 6oz. In. Electrical specification: * manufacturer part Number: 17HS19-2004S1 * Motor Type: Bipolar Stepper* Step Angle: 1.

Nema 17 Stepper Motor Bipolar 2A 59Ncm84oz.in 48mm Body 4-lead W/1m Cable and Connector for 3D Printer/CNC #ad - 8 deg. Rated current 2. 0a & resistance 1.

More information about OSM Technology Co.,Ltd. 17HS19-2004S #ad


Similar products