On Stage MY570 Clamp On Universal Accessory Holder

#ad
#ad
Music People MUS MY570 #ad - The my570 is 3 x 3. 5 inches and has a black powder coat finish. The my570 attachment bar fits most microphone stand and booms plus it will even clamp to the side of most amps! The 90 degree attachment piece is perfect for holding your studio headphones, cables and other musical instruments when not in use.

The my570 keeps all of your miking accessories within easy reach. The my570 accessory holder is lined with protective rubber to cushion your accessories. Attachment piece is lined with protective rubber to cushion your accessories. A friction locking knob securely locks the nylon tipped screw to a microphone stand or boom.

On Stage MY570 Clamp On Universal Accessory Holder #ad - Friction locking knob secures nylon tipped screw to mic stand or boom.

More information about Music People MUS MY570 #ad

YMC Headphone Holder Tambourine Holder Hanger Clip for Microphone/Musical Stand, Black

#ad
#ad
YMC Headphone-Hanger-HHS10 #ad - YMC Headphone Holder Tambourine Holder Hanger Clip for Microphone/Musical Stand, Black #ad - With locking knob secures nylon tipped screw. Its metal made and will not scratch the finish of mating equipment. Fits for any microphone stand or music stand. Made of metal with black powder coat finish. 3 inch straight extension for holding your headphone. Fits for any microphone stand or music stand. This hanger is an ideal way to hold your headphones, cables, or tambourine in the studio or on stage.

Headphone are not included.

More information about YMC Headphone-Hanger-HHS10 #ad


Similar products



Gator Frameworks Microphone Stand Accessory Tray with Drink Holder and Guitar Pick Tab GFW-MIC-ACCTRAY

#ad
#ad
Gator Cases GFW-MIC-ACCTRAY #ad - The clamp mount was designed to be highly adjustable to insure it fit on all manufacturers stands. The tray provides a convenient spot for small items like cell phones, set lists, tuner, keys, and capos.3 inch straight extension for holding your headphone. Made of metal with black powder coat finish. Headphone are not included.

With locking knob secures nylon tipped screw. Included pick Tab holds up to 5 Guitar Picks. The 3" molded in vented cup holder will keep your drink secure and close by. Overall surface 12" X 7" 307 x180mm. Gator frameworks microphone stand Accessory Tray with Drink Holder and guitar pick tab attaches to a microphone stand or other tubes up to 1.

Gator Frameworks Microphone Stand Accessory Tray with Drink Holder and Guitar Pick Tab GFW-MIC-ACCTRAY #ad - 38" to provide a tray for drinks, picks, tuners, and more. The tray also includes a pick clip tab on one side to hold multiple guitar picks. Vented Drink holder included. Fits for any microphone stand or music stand. Highly adjustable clamp allows for clamping on to mic stand up to 1. 38". Lightweight Durable Mic Stand Utility Tray.

More information about Gator Cases GFW-MIC-ACCTRAY #ad


Similar products



On Stage MY550 Microphone Extension Attachment Bar

#ad
#ad
Music People MY550 #ad - Highly adjustable clamp allows for clamping on to mic stand up to 1. 38". Black powder coat finish. Lightweight Durable Mic Stand Utility Tray. Overall surface 12" X 7" 307 x180mm. Included pick Tab holds up to 5 Guitar Picks. 6 inch straight extension. With locking knob secures nylon tipped screw. Fits for any microphone stand or music stand.

Clamps to side of most amplifiers. Vented Drink holder included. On stage my550 microphone extension attachment bar is a perfect choice for drums, cymbals or an acoustic guitar. Made of metal with black powder coat finish. Nylon tipped screw. The microphone attachment bar features a nylon tip screw for a secure hold without damaging the finish of your valuable equipment! Fits industry standard 5/8 inch-27 threaded microphone clips.

On Stage MY550 Microphone Extension Attachment Bar #ad - 3 inch straight extension for holding your headphone. Standard 5/8 inch-27 threaded ends. This attachment bar fits most standard microphone stands and booms, it will even clamp to the side of most amplifiers! The On Stage adjustable clamping bracket with tightening knob attaches to microphone stand. Headphone are not included.

More information about Music People MY550 #ad


Similar products



On Stage MSA9508 Posi-Lok Sidemount Boom

#ad
#ad
Music People MSA9508 #ad - Nylon tipped screw. Clamps to side of most amplifiers. Standard 5/8 inch-27 threaded ends. Lightweight Durable Mic Stand Utility Tray. Fits for any microphone stand or music stand. Made of metal with black powder coat finish. Solid 5/8"-27 threaded end will fit any standard mic clip. Round ergonomic knob for quick and easy angle adjustments.

7" boom Arm. Nylon tipped tightening screw for a secure hold. 6 inch straight extension. Overall surface 12" X 7" 307 x180mm. With locking knob secures nylon tipped screw. Headphone are not included. A must-have for instrument making! The adjustable side mount boom grips to any round shaft with a nylon tipped tightening screw that won't damage the shaft.

On Stage MSA9508 Posi-Lok Sidemount Boom #ad - 3 inch straight extension for holding your headphone. Black powder coat finish. Vented Drink holder included. Included pick Tab holds up to 5 Guitar Picks. Highly adjustable clamp allows for clamping on to mic stand up to 1. 38".

More information about Music People MSA9508 #ad


Similar products



On Stage MSA9505 Posi-Lok Telescoping Mini-Boom

#ad
#ad
Music People MSA9505 #ad - This mini-boom comes complete with two 52-teeth disks that rotate 300° and grip securely together. 3 inch straight extension for holding your headphone. Clamps to side of most amplifiers. Standard 5/8 inch-27 threaded ends. With locking knob secures nylon tipped screw. Vented Drink holder included. Included pick Tab holds up to 5 Guitar Picks.

Fits for any microphone stand or music stand. Lightweight Durable Mic Stand Utility Tray. Solid 5/8"-27 threaded end will fit any standard mic clip. Round ergonomic knob for quick and easy angle adjustments. 7" boom Arm. Nylon tipped tightening screw for a secure hold. Solid 5/8"-27 threaded end will fit any standard mic clip.

On Stage MSA9505 Posi-Lok Telescoping Mini-Boom #ad - Round ergonomic knob for quick and easy angle adjustments. Telescoping boom arm adjusts from 9"-16". Solid 5/8"-27 end will fit any standard mic shaft. Headphone are not included. 6 inch straight extension.

More information about Music People MSA9505 #ad


Similar products



On Stage MSA5050 Clamp on Cup Holder

#ad
#ad
Music People MUS MSA5050 #ad - Lightweight Durable Mic Stand Utility Tray. Attachment pieces: Fits tubing diameters. 375 to 1 inch. Standard 5/8 inch-27 threaded ends. Vented Drink holder included. Black powder coat finish. Fits for any microphone stand or music stand. Materials: Neoprene. The interior is lined with Neoprene rubber to keep your drinks hot/cold and will also prevent condensation from dripping on your equipment.

On Stage MSA5050 Clamp on Cup Holder #ad - Nylon tipped screw. 6 inch straight extension. Made of metal with black powder coat finish. Never knock a drink onto your gear or kick it over on the floor again. Clamps to side of most amplifiers. 3 inch straight extension for holding your headphone. Overall surface 12" X 7" 307 x180mm. The msa5050 clamp-on drink holder keeps your drink safe and within easy reach while you perform.

Highly adjustable clamp allows for clamping on to mic stand up to 1. 38". Included pick Tab holds up to 5 Guitar Picks. Headphone are not included.

More information about Music People MUS MSA5050 #ad


Similar products



Shure A26X 3" Extension Tube for Desk Stands Also Adapts BETA 56 to Various Mounting Devices

#ad
#ad
Shure A26X #ad - Included pick Tab holds up to 5 Guitar Picks. The a26x is a 3" 7. 6 cm extension tube for desk stands. With locking knob secures nylon tipped screw. Attachment pieces: Fits tubing diameters. 375 to 1 inch. Nylon tipped screw. Also adapts Beta 56 to various mounting devices. Fits for any microphone stand or music stand.

Compatibility: Desk stands. Standard 5/8 inch-27 threaded ends. Black powder coat finish. 6 inch straight extension. Solid 5/8"-27 threaded end will fit any standard mic clip. Round ergonomic knob for quick and easy angle adjustments. 7" boom Arm. Nylon tipped tightening screw for a secure hold. Solid 5/8"-27 threaded end will fit any standard mic clip.

Shure A26X 3" Extension Tube for Desk Stands Also Adapts BETA 56 to Various Mounting Devices #ad - Round ergonomic knob for quick and easy angle adjustments. Telescoping boom arm adjusts from 9"-16". Solid 5/8"-27 end will fit any standard mic shaft. Inside cup diameter Adjustment: 3 to 3. 25 inches.

More information about Shure A26X #ad


Similar products



On-Stage MSA7011 U-Mount Clamp-On Bookplate

#ad
#ad
On Stage MSA7011 #ad - Fits for any microphone stand or music stand. Included pick Tab holds up to 5 Guitar Picks. Clamps to side of most amplifiers. Easy height and angle adjustments. Made of metal with black powder coat finish. The compact 12-1/4" x 10-5/8" bookplate fits into tight places but, but still allows for substantial music scores thanks to a 1" lip.

12-1/4" x 10-5/8" bookplate fits into tight places. Compatibility: Desk stands. Solid 5/8"-27 threaded end will fit any standard mic clip. Round ergonomic knob for quick and easy angle adjustments. 7" boom Arm. Nylon tipped tightening screw for a secure hold. Solid 5/8"-27 threaded end will fit any standard mic clip.

On-Stage MSA7011 U-Mount Clamp-On Bookplate #ad - Round ergonomic knob for quick and easy angle adjustments. Telescoping boom arm adjusts from 9"-16". Solid 5/8"-27 end will fit any standard mic shaft. Inside cup diameter Adjustment: 3 to 3. 25 inches. Standard 5/8 inch-27 threaded ends. Perfect for set lists and lyric sheets, too.

More information about On Stage MSA7011 #ad


Similar products



Pyle-Pro PCBL38FT6 6 Ft 12 Gauge 3.5mm Male To Dual XLR Female Cable

#ad
#ad
Sound Around PCBL38FT6 #ad - This cable has been designed for maximum noise isolation thanks to the fabric shielding and precision formulated materials. Y cable used to convert a stereo 3. 5mm male connection To Two XLR Female Connections. 1" lip. 6 inch straight extension. Precision formulated Materials For Maximum Signal Transfer. Overall surface 12" X 7" 307 x180mm.

Vented Drink holder included. Clamp to any tubing up to 19 mm 3/4" in diameter. Y cable used to convert a stereo 3. 5mm male connection To Two XLR Female Connections. Extension tube Size: 3" 7. 62 cm. Attachment pieces: Fits tubing diameters. 375 to 1 inch. Compatibility: Desk stands. Maximum noise Isolation Using Shields.

Pyle-Pro PCBL38FT6 6 Ft 12 Gauge 3.5mm Male To Dual XLR Female Cable #ad - Clamps to side of most amplifiers. Use this cable to plug your MP3/iPod To XLR Inputs. Use this cable to plug your Mixer's Outputs to a Portable Digital Recorder. 12-1/4" x 10-5/8" bookplate fits into tight places.

More information about Sound Around PCBL38FT6 #ad


Similar products



K & M DRINK HOLDER BLACK KC

#ad
#ad
Connolly Music Company 16020.000.55 #ad - Maximum noise Isolation Using Shields. Materials: Neoprene. With locking knob secures nylon tipped screw. Highly adjustable clamp allows for clamping on to mic stand up to 1. 38". Nylon tipped screw. Precision formulated Materials For Maximum Signal Transfer. Patented u-mount clamp. Vented Drink holder included. Use this cable to plug your MP3/iPod To XLR Inputs.

K & M DRINK HOLDER BLACK KC #ad - Clamps to side of most amplifiers. 1" lip. Black powder coat finish. 12-1/4" x 10-5/8" bookplate fits into tight places. Extension tube Size: 3" 7. 62 cm. Solid 5/8"-27 threaded end will fit any standard mic clip. Round ergonomic knob for quick and easy angle adjustments. 7" boom Arm. Nylon tipped tightening screw for a secure hold.

Solid 5/8"-27 threaded end will fit any standard mic clip. Round ergonomic knob for quick and easy angle adjustments. Telescoping boom arm adjusts from 9"-16".

More information about Connolly Music Company 16020.000.55 #ad


Similar products