Pentek 150469 3/4″ #10 Big Blue Filter Housing

#ad
#ad
Pentair Industries 3/4" #10 BB Black/Blue HFPP w/PR #ad - Use with a 10" x 4-1/2" filter cartridge sold separately. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

They are made of densely packed synthetic or natural fibers that trap suspended particles, or substances that cause a chemical change, materials that block microbes or adsorb unwanted chemicals, such as acid neutralization. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges.

Pentek 150469 3/4" #10 Big Blue Filter Housing #ad - Initial pressure drop of 2 psi at a flow rate of 15 gpm. The black cap has 3/4” female national pipe Thread Taper NPT threaded input and output connections and a nitrile butadiene rubber Buna-N O-ring to ensure a watertight seal. The opaque blue sump is made of reinforced polypropylene for strength and resistance to chemicals, and the black cap is made of high-flow polypropylene HFPP for stiffness.

Water filters are used in a wide range of applications, and irrigation, including drinking water purification, swimming pools, industrial processes, among others. Pentair manufactures industrial, commercial, and residential water filtration components and systems. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance.

More information about Pentair Industries 3/4" #10 BB Black/Blue HFPP w/PR #ad

Housing Bracket for Big blue 10" and 20" filter housings

#ad
#ad
Watts BRK1-45100-PCL #ad - Important note: units DO NOT include the nuts and washers. Filter housing mounting bracket for Big Blue 10" and 20" Filter Housings. White powder coated steel twin mounting bracket for 5000 Series, 10000 Series, and YTB 10" & YTB 20" Filter Housings.

More information about Watts BRK1-45100-PCL #ad


Similar products



Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings

#ad
#ad
Pentair Industries TIER1-OR-100 #ad - Material: Buna-N. Filtration systems typically consist of a series of two or more types of filters, each designed to remove different contaminants. Type: O-Ring. This o-ring fits pentek big blue filter housings, and industrial processes, such as drinking water purification, swimming pools, which are used in various applications, among others.

Water filters remove undesirable particles, and microorganisms from water by means of a semipermeable barrier, chemicals, adsorption, or biological processes. They are made of densely packed synthetic or natural fibers that trap suspended particles, materials that block microbes or adsorb unwanted chemicals, or substances that cause a chemical change, such as acid neutralization.

Pentek 151122 OR-100 Buna-N O-ring for Big Blue Housings #ad - This pentek 151122 or-100 o-ring is used to seal water filter housings. The company, founded in 1966 and headquartered in Minneapolis, MN, meets International Organization for Standardization ISO standards 9001 and 14001 for quality assurance. For most residential, and industrial applications, commercial, water filters are manufactured in the form of replaceable cartridges that fit inside permanent housings.

The performance of filters is measured by the minimum particle size that is blocked, the percentage of particles or microorganisms that are removed, the maximum flow rate, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

. Package Quantity: 1 Piece. It has a diameter of 5-3/4 inches and is made of nitrile butadiene rubber Buna-N for flexibility and resistance to abrasion and tearing.

More information about Pentair Industries TIER1-OR-100 #ad


Similar products



Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"

#ad
#ad
Pentair Industries DGD-5005 #ad - The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. The nominal filtration rating of the pre-filter layer is 50 microns, and the rating of the post-filter layer is 5 microns.

Pentek DGD-5005 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" #ad - This pentek dgd-5005 spun polypropylene filter cartridge reduces sand, silt, and rust particles in residential, commercial, scale, and municipal drinking water. This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, commercial, and is used for treatment of residential, and municipal drinking water.

Specificationsnominal filtration rating pre-filter50 micronsNominal filtration rating post-filter5 micronsInitial pressure drop at 10 gpm. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges.

More information about Pentair Industries DGD-5005 #ad


Similar products



Pentek SW-4 Plastic Filter Wrench used on Big Blue Filter Systems

#ad
#ad
Pentek SH144368 #ad - Material: Buna-N. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. Package Quantity: 1 Piece. Great for the DIY'er or Contractors. Works with: Pentek Big Blue and others. Spun polypropylene for resistance to chemicals and bacteria. Temperature range of 40 to 145 degrees F 4. 4 to 62. 8 degrees C. Wrench constructed with durable plastic.

Pentek SW-4 Plastic Filter Wrench used on Big Blue Filter Systems #ad - For use with: pentek, pentair Water - Big Blue Housings Only. Filter housing mounting bracket for Big Blue 10" and 20" Filter Housings. Easily removes filter housings for quickly changing filters. Reduces sand, commercial, silt, and rust particles in residential, scale, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity.

The pentek sw-4 filter wrench is a durable and simple filter housing removal tool that will make changing filters easier. Used on the Pentek Big Blue filter systems. Type: O-Ring. Important note: units DO NOT include the nuts and washers.

More information about Pentek SH144368 #ad


Similar products



Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2"

#ad
#ad
Pentair Industries DGD-2501 #ad - This spun polypropylene filter cartridge meets national Sanitation Foundation/American National Standards Institute NSF/ANSI standard 42 for quality assurance, commercial, and is used for treatment of residential, and municipal drinking water. Specificationsnominal filtration rating pre-filter25 micronsNominal filtration rating post-filter1 micronInitial pressure drop at 10 gpm.

The filter is made of spun polypropylene fibers for resistance to chemicals and bacteria. This pentek dgd-2501 spun polypropylene filter cartridge reduces sand, commercial, silt, and rust particles in residential, scale, and municipal drinking water. It has two separate gradient layers for higher particle reduction efficiency and dirt-loading capacity than standard spun or string-wound cartridges.

Pentek DGD-2501 Spun Polypropylene Filter Cartridge, 10" x 4-1/2" #ad - The nominal filtration rating of the pre-filter layer is 25 microns, and the rating of the post-filter layer is 1 micron. It has an initial pressure drop of less than 1 pound per square inch psi at a flow rate of 10 gallons per minute gpm, and operates over a temperature range of 40 to 145 degrees F 4. 4 to 62.

8 degrees C.

More information about Pentair Industries DGD-2501 #ad


Similar products



Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m Filter

#ad
#ad
Pentek CFB-Plus10BB #ad - Filter housing mounting bracket for Big Blue 10" and 20" Filter Housings. Cfb-plus series products are modified molded blocks manufactured using our proprietary Fibredyne technology. Great for the DIY'er or Contractors. Works with: Pentek Big Blue and others. It offers the same benefits with even greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge.

This technology creates a unique filter media by attaching powdered activated carbon onto a cellulose-free synthetic fiber matrix. Spun polypropylene for resistance to chemicals and bacteria. Easily removes filter housings for quickly changing filters. The result is a single cartridge that combines the benefits of both a sediment filter and a carbon block into a single cartridge.

Pentek CFB-PLUS10BB Fibredyne Modified Carbon Block 5 m Filter #ad - For use with: pentek, pentair Water - Big Blue Housings Only. Fibredynes carbon block technology also offers up to two times the chlorine taste and odor reduction and dirt-holding capacity of traditional blocks. In addition this technology will not release fines into the effluent stream due to a unique post-filtration layer that is fused to the carbon/fiber media blend.

Greater chlorine taste and odor reduction and the highest sediment reduction found in a carbon cartridge combines the benefits of both a sediment filter and a carbon block into a single cartridge Offers up to two times the chlorine taste and odor reduction and dirt-holding capacity of traditional blocks Will not release fines into the effluent stream Manufactured entirely from FDA-compliant materials Ideal choice for a wide range of residential food service commercial and industrial applications Pentek 10" BB 255677-43 CFB-Plus10BB Fibredyne Filter Specifications 255677-43 CFB-Plus10BB.

Reduces sand, silt, scale, commercial, and rust particles in residential, and municipal drinking water.

More information about Pentek CFB-Plus10BB #ad


Similar products



Pentek RFFE-10BB Iron Reduction Big Blue Filter Cartridge

#ad
#ad
Pentek RFFE10-BB #ad - 8 gpm flow rate. For use in 10-inch Big Blue filter housings. Genuine pentek rffe-10bb Big Blue 10" x 4. 5" filter cartridge for iron reduction, helps to eliminate the orange and brown rust stains in your toilets, tubs, showers, sinks and your other plumbing fixtures in your home. Temperature range of 40 to 145 degrees F 4.

4 to 62. 8 degrees C. Wrench constructed with durable plastic. Spun polypropylene for resistance to chemicals and bacteria. Reduces up to 3 ppm of dissolved iron from water. For use in 10-inch Big Blue filter housings. Cfb-plus series products are modified molded blocks manufactured using our proprietary fibredyne technology.

Pentek RFFE-10BB Iron Reduction Big Blue Filter Cartridge #ad - Improves flavor and reduces the metallic taste caused by iron. Great for the DIY'er or Contractors. Filter housing mounting bracket for Big Blue 10" and 20" Filter Housings. For use in pentek 10-inch Big Blue filter housings. Works with: Pentek Big Blue and others. Spun polypropylene for resistance to chemicals and bacteria.

Initial pressure drop of less than 1 psi at a flow rate of 10 gpm.

More information about Pentek RFFE10-BB #ad


Similar products



2-Pack - Pentek DGD-5005 Compatible Heavy Duty Sediment Filter Cartridge

#ad
#ad
Fette Filter COMIN18JU061077 #ad - Package Quantity: 1 Piece. Works with: Pentek Big Blue and others. Material: Buna-N. Reduces sand, commercial, scale, silt, and rust particles in residential, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. This is not a Pentek® OEM product.

Reduces up to 3 ppm of dissolved iron from water. Reduces sand, commercial, and rust particles in residential, scale, silt, and municipal drinking water. Combines two separate gradient layers for higher efficiency and dirt-loading capacity. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm.

2-Pack - Pentek DGD-5005 Compatible Heavy Duty Sediment Filter Cartridge #ad - The filter has 3 layers, the outer layer has a 10 micron rating, the middle layer has a 7 micron rating and the inner layer has a 5 micron rating. This compatible whole house filter cartridge is spun from food-grade polypropylene that reduces sand, and rust particles in residential, scale, silt, commercial, and municipal drinking water.

Absolute 5 micron filtration. Important note: units DO NOT include the nuts and washers. Any use of the pentek® brand name or model designation for this product is made solely for purposes of demonstrating compatibility. Temperature range of 40 to 145 degrees F 4. 4 to 62.

More information about Fette Filter COMIN18JU061077 #ad


Similar products



Pentek 150467 20-BB 3/4" Big Blue Filter Housing with Pressure Relief

#ad
#ad
Pentair Industries 3/4" #20 BB Black/Blue HFPP w/PR #ad - The performance of filters is measured by the minimum particle size that is blocked, the maximum flow rate, the percentage of particles or microorganisms that are removed, the downstream concentration of unwanted chemicals, and the amount of water that can be filtered before the filter must be replaced.

It has an initial pressure drop of 2 pounds per square inch psi at a flow rate of 15 gallons per minute gpm, a maximum operating pressure of 90 psi, and a maximum operating temperature of 100 degrees F 37. 8 degrees C. The cap has 1" female national pipe thread Taper NPT threaded input and output connections and a nitrile butadiene rubber Buna-N O-ring to ensure a watertight seal.

Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. This pentek 150467 20-bb 3/4" #20 big blue filter housing with pressure relief is suitable for high-flow and heavy sediment applications. This filter housing meets national sanitation foundation/american National Standards Institute NSF/ANSI standard 42 for quality assurance, including residential drinking water filtration, and is for use in various high-flow applications, food service, and irrigation, among others.

Pentek 150467 20-BB 3/4" Big Blue Filter Housing with Pressure Relief #ad - Specifications filter cartridge size h x w sold separately 20 x 4-1/2 inches 508 x 114 mm Initial pressure drop at 15 gpm 2 psi Maximum temperature 100 degrees F 37. 8 degrees c maximum pressure 90 psi maximum dimensions h x w 23-3/8 x 7-1/4 inches 594 x 184 mm materials and structural integrity certification NSF/ANSI standard 42H is height, the horizontal distance from left to right; D is depth, the vertical distance from lowest to highest point; W is width, the horizontal distance from front to back.

Water filters remove undesirable particles, chemicals, and microorganisms from water by means of a semipermeable barrier, adsorption, or biological processes. Large filter housing for high-flow and heavy sediment applications.

More information about Pentair Industries 3/4" #20 BB Black/Blue HFPP w/PR #ad


Similar products



Cash Acme U134LFA 3/4-Inch by 3/4-Inch MNPT SharkBite Lead Free Straight Connector

#ad
#ad
Cash Acme U134LFA #ad - Connect pipe in seconds with relative ease using the SharkBite Push-To-Connect 1/2-Inch Straight Coupling. Initial pressure drop of less than 1 psi at a flow rate of 10 gpm. Package Quantity: 1 Piece. No soldering, no clamps, no glue. Push. Pressure relief button for easier cartridge replacement. Push fittings are the fastest, easiest way to join copper, CTS, CPVC and PEX in any combination.

No soldering or glue. The sharkbite connection System makes any plumbing project fast and easy with our unique push-to-connect technology. Perfect for joining copper, pex, cpvc or pe-RT pipe, SharkBite is the no fuss way to fix small leaks or plumb a whole house. With no soldering, glue required, clamps, it’s as simple as inserting the pipe into the fitting deep enough to be sealed by our specially-formulated O-ring.

Cash Acme U134LFA 3/4-Inch by 3/4-Inch MNPT SharkBite Lead Free Straight Connector #ad - Reinforced polypropylene sump for strength and chemical resistance. When you insert a pipe into the sharkbite quick connect fittings, the stainless steel teeth bite down and grip the pipe, while the specially formulated O-ring compresses to create the perfect watertight seal. Easily removes filter housings for quickly changing filters.

Use with a 20" x 4-1/2" filter cartridge sold separately. Our product works with your existing plumbing, is easy to disassemble for changing and reusing fittings, and can be rotated for easier installation in tight spaces.

More information about Cash Acme U134LFA #ad


Similar products