Robert Manufacturing R400 Series Bob Red Brass Float Valve, 1″ NPT Male Inlet x 1″ NPT Male Outlet, 68.5 gpm at 85 psi Pressure

#ad
#ad
Control Devices #ad - Red brass body. Buna-N-disc standard. Adjusting arm tapped 1/4"-20 thread. Red brass body. High capacity, heavy duty. Adjusting arm tapped 1/4"-20 thread. Applicable for precision liquid level control, swimming pools, increased resistance to corrosion and chemicals, high pressure wash, cooling towers, and reverse osmosis water, de-ionized, aggressive water applications, boiler feed water systems, kitchen steam tables, food service and sanitary applications, evaporative coolers, ultra pure, livestock waterier, industrial tanks, car wash, many other agricultural and industrial uses.

Not compliant with cA Prop 65 or Safe Water Drinking Act. Nsf listed. Buna-n-Disc standard. Free discharge flow capacity: 43. 5 gpm at 35 psi, 61 gpm at 65 psi and 68. 5 gpm at 85 psi. 1" npt male inlet x 1" NPT male outlet. Sst valve. High capacity, heavy duty. Standard bob float valve assemblies consist of valve, brass stem, and float ball for positive water level control.

More information about Control Devices #ad

Kerick Valve SR10 Stainless Steel Rod for Float Valve, 1/4" Diameter, 10" Length

#ad
#ad
Kerick Valve SR10 #ad - Kerick Valve SR10 Stainless Steel Rod for Float Valve, 1/4" Diameter, 10" Length #ad - 18-8 stainless steel for corrosion resistance. Stainless steel rod, 1/4-20 in connection, Weight Less than 1 lb, Length 10 In. Dia. 1/4 in. Material of construction stainless steel, g3142237, female threaded, for use with g2666097, g2011292, G2986794 ' For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

. 1/4"-20 male threads at each end for mounting, 10" long.

More information about Kerick Valve SR10 #ad


Similar products



Robert Manufacturing R450-12 Brass Stem, 1/4"-20 SAE Male, 12" Length

#ad
#ad
Control Devices R450-12 #ad - Not compliant with cA Prop 65 or Safe Water Drinking Act. Male thread on both ends. 1/4"-20 sae male. 1/4"-20 male threads at each end for mounting, 10" long. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Male thread on both ends. Brass metal rod. Brass metal rod. 18-8 stainless steel for corrosion resistance.

12" length.

More information about Control Devices R450-12 #ad


Similar products



Kerick Valve SR06 Stainless Steel Rod for Float Valve, 1/4" Diameter, 6" Length

#ad
#ad
Kerick Valve SR06 #ad - It is intended for use with 3/8" and 1/2" inlet float valves and 4 x 5" or 2 x 2 x 4" float balls sold separately. Float valves are rated according to the volume of liquid that can flow through them at a particular pressure to ensure the tank can be refilled as quickly as it is emptied. The float ball rises or falls with the level of liquid in the tank, changing the angle of the valve shutoff lever.

Not compliant with cA Prop 65 or Safe Water Drinking Act. This kerick sr06 stainless steel rod is 1/4" in diameter and 6" long. The material that a float valve is constructed from must be suitable for the liquid in which it operates, which may be corrosive or at an extreme temperature. It is made of 18-8 stainless steel for resistance to corrosion and has 1/4"-20 male threads on each end.

Kerick Valve SR06 Stainless Steel Rod for Float Valve, 1/4" Diameter, 6" Length #ad - For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. 1/4"-20 male threads at each end for mounting, 10" long. Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, such as fountains, livestock water tanks, cooling towers, and chemical manufacturing plants.

Kerick valve manufactures fluid level control valves for industrial applications. As part of a float valve installation, it is suitable for use in a variety of applications, such as fountains, livestock water tanks, and chemical manufacturing plants. Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank.

More information about Kerick Valve SR06 #ad


Similar products



Robert Manufacturing R400 Series Bob Red Brass Float Valve, 3/4" NPT Male Inlet x 3/4" NPT Male Outlet, 39.9 gpm at 85 psi Pressure

#ad
#ad
Control Devices #ad - High capacity, heavy duty. 18-8 stainless steel for corrosion resistance. Nsf listed. Male thread on both ends. Buna-N-disc standard. Free discharge flow capacity: 21 gpm at 35 psi, 32. 5 gpm at 65 psi and 39. 9 gpm at 85 psi. Red brass body. 1/4"-20 male threads at each end for mounting, 10" long. Standard bob float valve assemblies consist of valve, brass stem, and float ball for positive water level control.

. Red brass body. Not compliant with cA Prop 65 or Safe Water Drinking Act. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Adjusting arm tapped 1/4"-20 thread. 1/4"-20 male threads at each end for mounting, 6" long. Not compliant with cA Prop 65 or Safe Water Drinking Act.

Robert Manufacturing R400 Series Bob Red Brass Float Valve, 3/4" NPT Male Inlet x 3/4" NPT Male Outlet, 39.9 gpm at 85 psi Pressure #ad - For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Applicable for precision liquid level control, and reverse osmosis water, ultra pure, de-ionized, evaporative coolers, industrial tanks, food service and sanitary applications, kitchen steam tables, swimming pools, high pressure wash, increased resistance to corrosion and chemicals, livestock waterier, boiler feed water systems, aggressive water applications, cooling towers, car wash, many other agricultural and industrial uses.

Adjusting arm tapped 1/4"-20 thread. Sst valve.

More information about Control Devices #ad


Similar products



Kerick Valve PF08-025 Polyethylene Sphere Float Ball, 8" Diameter, 8" Length, 1/4" Female Thread

#ad
#ad
Kerick Valve PF08-025 #ad - Float valves are used to automatically regulate the level of liquid within tanks in a variety of applications, cooling towers, such as fountains, livestock water tanks, and chemical manufacturing plants. Kerick valve manufactures fluid level control valves for industrial applications. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

This kerick pf08-025 oval float ball is 8" in diameter. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Brass metal rod. Male thread on both ends. As part of a float valve installation, such as fountains, livestock water tanks, it is suitable for use in a variety of applications, and chemical manufacturing plants.

Kerick Valve PF08-025 Polyethylene Sphere Float Ball, 8" Diameter, 8" Length, 1/4" Female Thread #ad - Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. The company, founded in 1994, is headquartered in Jacksonville, FL. Adjusting arm tapped 1/4"-20 thread. High capacity, heavy duty. Not compliant with cA Prop 65 or Safe Water Drinking Act. When the angle of the valve lever changes sufficiently, the valve opens or closes.

1/4"-20 male threads at each end for mounting, 10" long.

More information about Kerick Valve PF08-025 #ad


Similar products



Mueller Industries 109-814 Float Valves, 3/4-Inch

#ad
#ad
Mueller Industries 109-814 #ad - Buna-N-disc standard. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. No. R400-1/2: 12 gpm at 35 psi; 22gpm at 85 PSI. All bronze bodies. Polyethylene for chemical resistance. 1/4"-20 female threads for mounting. No. R400-3/4: 21 gpm at 35 psi; 39. 9 gpm at 85 pSI. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves.

Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. For use with 1" inlet float valves and 1/4"-20 threaded rods sold separately. Machined flange for support against tank wall. No-jam, single lever action. Machined flange for support against tank wall. Not compliant with cA Prop 65 or Safe Water Drinking Act.

Mueller Industries 109-814 Float Valves, 3/4-Inch #ad - Carded. Replaceable seals. Red brass body. Stainless steel pivot bolt assembly.

More information about Mueller Industries 109-814 #ad


Similar products



Robert Manufacturing KB302 Bob 4 Piece Arm Kit for R400 and R900 1" Brass Float Valves

#ad
#ad
Control Devices #ad - Not compliant with cA Prop 65 or Safe Water Drinking Act. High capacity, heavy duty. 18-8 stainless steel for corrosion resistance. Red brass body. Not compliant with cA Prop 65 or Safe Water Drinking Act. Male thread on both ends. For r400 and r900 1" brass float valves. High tensile serrated arms. 18-8 stainless steel for corrosion resistance.

Robert Manufacturing KB302 Bob 4 Piece Arm Kit for R400 and R900 1" Brass Float Valves #ad - Bronze finish. Brass metal rod. Dual inlet thread for connecting pipe and locknut, high tensile serrated arms, locknut included with male inlet valves. Machined flange for support against tank wall. 3/4-inch. Molded in one piece to resist leakage. Buna-N-disc standard. For use with 1" inlet float valves and 1/4"-20 threaded rods sold separately.

For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Dual inlet thread for connecting pipe and locknut. 4 piece arm kit. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately.

More information about Control Devices #ad


Similar products



Kerick Valve SR12 Stainless Steel Rod for Float Valve, 1/4" Diameter, 12" Length

#ad
#ad
Kerick Valve SR12 #ad - Buna-N-disc standard. Molded in one piece to resist leakage. Bronze finish. Brass metal rod. 4 piece arm kit. Not compliant with cA Prop 65 or Safe Water Drinking Act. 18-8 stainless steel for corrosion resistance. It is intended for use with 1" inlet float valves and 6" or 8" float balls sold separately. Red brass body.

As part of a float valve installation, such as fountains, it is suitable for use in a variety of applications, livestock water tanks, and chemical manufacturing plants. Float valves use a rod and float ball attached to a valve shutoff lever to control flow in or out of a tank. Machined flange for support against tank wall.

Kerick Valve SR12 Stainless Steel Rod for Float Valve, 1/4" Diameter, 12" Length #ad - For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. High tensile serrated arms. 18-8 stainless steel for corrosion resistance. Not compliant with cA Prop 65 or Safe Water Drinking Act. Adjusting arm tapped 1/4"-20 thread. Carded. When the angle of the valve lever changes sufficiently, the valve opens or closes.

More information about Kerick Valve SR12 #ad


Similar products



Robert Manufacturing R400-5 Series Bob Red Brass Float Valve Assembly with Stem, 1" NPT Male Inlet x 1" NPT Male Outlet, 100 psi Pressure

#ad
#ad
Control Devices 28406 #ad - Buna-n-Disc standard. Adjusting arm tapped 1/4"-20 thread. Buna-N-disc standard. Red brass body. Adjusting arm tapped 1/4"-20 thread. For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. 1/4"-20 male threads at each end for mounting, 12" long. 1" npt male inlet x 1" NPT male outlet.

Molded in one piece to resist leakage. Kit includes r470 1/4"-20 short arm, r480 thumb screw, R460-3 long arm, R481-25 cotter pin. For r400 and r900 1" brass float valves. 18-8 stainless steel for corrosion resistance. Not compliant with cA Prop 65 or Safe Water Drinking Act. Machined flange for support against tank wall.

Robert Manufacturing R400-5 Series Bob Red Brass Float Valve Assembly with Stem, 1" NPT Male Inlet x 1" NPT Male Outlet, 100 psi Pressure #ad - High tensile serrated arms. Red brass Body. Bronze finish. Buna-n-Disc standard. 4 piece arm kit. Nsf listed. Brass metal rod. 1/4"-20 female threads for mounting.

More information about Control Devices 28406 #ad


Similar products



Robert Manufacturing R452-12 Brass Stem, 3/8"-16 SAE Male, 12" Length

#ad
#ad
Control Devices R452-12 #ad - For use with 3/8" and 1/2" inlet float valves and 4x5" or 2x2x4" float balls sold separately. Buna-n-Disc standard. For use with 1" inlet float valves and 6" or 8" float balls sold separately. 3/4-inch. Molded in one piece to resist leakage. Not compliant with cA Prop 65 or Safe Water Drinking Act. Red brass body.

Bronze finish. Male thread on both ends. For use with 1" inlet float valves and 1/4"-20 threaded rods sold separately. 1/4"-20 female threads for mounting. High tensile serrated arms. Carded. 18-8 stainless steel for corrosion resistance. Kit includes r470 1/4"-20 short arm, r480 thumb screw, R460-3 long arm, R481-25 cotter pin.

Robert Manufacturing R452-12 Brass Stem, 3/8"-16 SAE Male, 12" Length #ad - For r400 and r900 1" brass float valves. 1/4"-20 male threads at each end for mounting, 6" long. Dual inlet thread for connecting pipe and locknut. Not compliant with cA Prop 65 or Safe Water Drinking Act. High capacity, heavy duty. Male thread on both ends.

More information about Control Devices R452-12 #ad


Similar products