Top 10 5/8 Molded Heater Hose – Automotive Replacement Heater Hoses

As an Amazon Associate I earn from qualifying purchases.

1. BLACKHORSE-RACING

#ad

4" x 24" Length, LS Swap Heater Hose Set 90 Degree Molded Heater Hose, 5/8" ID & 3/4" ID, Black

#ad
BLACKHORSE-RACING #ad - Our custom molded hose is great for your LS with tight clearance on the passenger side of the engine bay. Size: 5/8" id x 4" x 24"+3/4" id x 4" x 24", type: 90 Degree. Heater hose. Heater hose and 1pc 3/4" I. D. The factory heater outlets on LS water pumps make it difficult insome applications to run your hoses due to interference with control arms or inner fenders. Our 90 degree molded hoses make installation simple and easy. Package includes: 1pc 5/8" i. D.
BrandBLACKHORSE-RACING #ad
Manufacturerblackhorseracing #ad
Part NumberHM2392+93

2. SZBAM

#ad

For LS Swap Heater Hose 90 Degree Bend Molded Heater Hose ID= 5/8" 16mm Silicone Pipe black

#ad
SZBAM #ad - This hose is great for your LS with tight clearance on the passenger side of the engine bay. Come with : 1 hose with 2 clamps 3" /3" long. The factory heater outlets on LS water pumps make it difficult insome applications to run your hoses due to interference with control arms or inner fenders. Id= 5/8" 16mm, clolor:Black. Fits : ls1 lsx ls2 ls3 lq4 lQ9.
BrandSZBAM #ad
ManufacturerZSB #ad

3. Gates

#ad

EPDM , 95PSI, Black/Green -28441-50' Length, Gates Heater Hose, 5/8 ID x 50 Ft, Inner Diameter 5/8"

#ad
Gates #ad - Engineered with materials to resist electrochemical degradation. Exceeds sae 20r1 type ec class D-1 tube and cover Standard Wall. Abrasion-resistant cover. Reduces water loss from water permeating the hose wall and cover. Green stripe construction provides best cost-per-mile economics.
BrandGates #ad
ManufacturerGates #ad
Height0 Inches
Length0 Inches
Weight14 Pounds
Width0 Inches
Part Number28441
Model28441
WarrantyPlease contact retailer/seller for assistance

4. Dayco

#ad

Dayco 80314 5/8 Heater Hose 50 Ft

#ad
Dayco #ad - Short description : HEATER HOSE. Oem equivalent part number: 80314. Part number: 80314. Package weight: 5. 511 kilograms. Fit type: Vehicle Specific.
BrandDayco #ad
ManufacturerDayco #ad
Height4.31 Inches
Length16.81 Inches
Weight11.65 Pounds
Width16.94 Inches
Part Number80314
Model80314

5. Fydun

#ad

Heater Hose , Fydun 2pcs Rubber Swap Heater Hose 90 Degree Molded Heater Hose Kit Fit for LS Series Engine 5/8in 3/4in ID

#ad
Fydun #ad - Important engine parts, very suitable for LS series general-purpose engines. High-quality materials: made of high-quality rubber materials with chemical durability,, durability and robustness. The length can be freely cut according to the needs, and the installation can be successful with a simple operation.

Compatible: 100% brand new high-quality automotive heater hoses, which can be used with hose connectors and bulk heater hoses not included to achieve completeed heater hose coverage. Two hoses can be used, good flexibility, can be bent at will, and different sizes can meet your different needs. Professional manufacturing: professional manufacturing of cooling system hoses can improve the cooling capacity of the engine. Easy to use: 90-degreeed hose is not bent, not easily deformed or bent at the connection, and easy to install.

There is a tight gap on the passenger side of the engine compartment. Excellent workmanship, easy to operate. Can be a good replacement for an old or worn one. High-quality products provide you with quality assurance. If you have any questions about our products, we will answer them at any time. Service: we are responsible for the product and believe in the quality of the product. Safe and environmentally friendly, no peculiar smell, stable size.
BrandFydun #ad
ManufacturerFydun #ad
Height0.39 Inches
Length0.39 Inches
Weight1.57 Pounds
Width0.39 Inches
Part NumberFydunh2igzotacr997

6. Gates

#ad

Gates 28466 90 Degree Molded Heater Hose, Black

#ad
Gates #ad - Sae 20r3 ec class d1 under 25mm 1 in. Compatible for coolant, air and water applications. Id or larger. Id, sae 20r4 ec class D1 for 25mm 1 in. Epdm tube and cover, synthetic fiber reinforcement. Use with heater hose connectors and bulk heater hose to create custom assemblies. Resists electrochemical degradation and water permeation.
BrandGates #ad
ManufacturerGates #ad
Height0 Inches
Length0 Inches
Weight0.15 Pounds
Width0 Inches
Part Number28466
Model28466
WarrantyPlease contact retailer/seller for assistance

7. Gates

#ad

Gates 28467 90 Degree Molded Heater Hose

#ad
Gates #ad - Use with heater hose connectors and bulk heater hose to create custom assemblies. Resists electrochemical degradation and water permeation. Id or larger. Epdm tube and cover, synthetic fiber reinforcement. Sae 20r3 ec class d1 under 25mm 1 in. Compatible for coolant, air and water applications. Id, sae 20r4 ec class D1 for 25mm 1 in.
BrandGates #ad
ManufacturerGates #ad
Height0 Inches
Length0 Inches
Weight0.3 Pounds
Width0 Inches
Part Number28467
Model28467
WarrantyPlease contact retailer/seller for assistance

8. ACDelco

#ad

ACDelco Professional 14075S Molded Heater Hose

#ad
ACDelco #ad - Installs without buckling, bending out of shape, or straining at the connection for easy installation. Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function. Less than 500 part numbers cover more than 1, 200 applications to maximize coverage and reduce inventory. Has all the quality features of a regular coolant hose for interchangeable use. Its diameter ranges from 1/4 in to 1 in to fit different types of vehicles.
BrandACDelco #ad
ManufacturerACDelco #ad
Height1.2 Inches
Length9.6 Inches
Weight0.15 Pounds
Width1.2 Inches
Part Number14075S
Model14075S
WarrantyLimited Lifetime as long as original purchaser owns vehicle. (Parts Only)

9. Gates

#ad

Gates 18777 Premium Molded Heater Hose

#ad
Gates #ad - C. Has all the quality features of Gates molded coolant hose and similar to OEM specifications. C -135 deg. Temperature range: -40 deg. Engineered to resist electrochemical degradation – the leading cause of hose failure. F -40 deg. Meets sae 20r3 type ec class D-1 and D-2 specifications. F to 275 deg. Epdm tube, synthetic fiber knit reinforcement, EPDM cover.
BrandGates #ad
ManufacturerGates #ad
Height3 Inches
Length6 Inches
Weight0.25 Pounds
Width6 Inches
Part Number18777
Model18777
WarrantyPlease contact retailer/seller for assistance

10. Gates

#ad

Gates 28468 Hose

#ad
Gates #ad - Compatible for coolant, air and water applications. Resists electrochemical degradation and water permeation. Id or larger. Use with heater hose connectors and bulk heater hose to create custom assemblies. Id, sae 20r4 ec class D1 for 25mm 1 in. Epdm tube and cover, synthetic fiber reinforcement. Sae 20r3 ec class d1 under 25mm 1 in.
BrandGates #ad
ManufacturerGates #ad
Height0 Inches
Length0 Inches
Weight0.4 Pounds
Width0 Inches
Part Number28468
Model28468
WarrantyPlease contact retailer/seller for assistance