Top 10 Engine Lifting Brackets – Clearfloor Lifts

As an Amazon Associate I earn from qualifying purchases.

1. OTC

#ad

OTC 7100 4,000 lb. Capacity Lifting Bracket Set for use with Load Levelers and Lifting Slings

#ad
OTC #ad - Brackets accept up to 1/2 inch diameter bolts. Angled brackets bolt directly to component being lifted - perfect for engines, transmissions, and more. 4, 000 pound capacity. Set of 2 brackets. Otc's high strength steel lifting bracket set is designed for use with load levelers and lifting slings.
BrandOTC #ad
ManufacturerOTC #ad
Height6.2 Inches
Length11.6 Inches
Weight0 Pounds
Width1.9 Inches
Part Number7100
Model7100
WarrantyLimited lifetime warranty

2. Rendasun

#ad

Rendasun 7100 Lifting Bracket Set, Engine Support bar, for use with Lifting Slings and Load Levelers, Can Withstand 4000 pounds Capacity.

#ad
Rendasun #ad - Ideal kit tool - 7100 lifting bracket set can be used to lift engines or other heavy parts, help transform heavy equipment and engines, they are ideal tools for workshops and garages.

Maximum load capacity - the bracket kit has a load capacity of 4, long life, 000 pounds, and hard. High-quality metal material - The lifting bracket kit is made of high-quality steel material, strong and durable. This component should be used with Load Levelers and Lifting Slings to assist in lifting most engines and heavy parts. Ingenious design and use - the engine support bar can be directly bolted to the lifted part. It can also be used for other purposes. Perfect kit combination - a lifting bracket kit is a set of two brackets, the maximum acceptable bolt diameter is 1/2 inch.
BrandRendasun #ad
ManufacturerRendasun #ad
Height0.45 Inches
Length4.3 Inches
Weight0.9 Pounds
Width1.5 Inches
Part Number78-7100

3. Hydraker

#ad

Hydraker Motor Engine Lifting Plate Bracket Carb Carburetor Hoist SBC BBC Fit for Chevy Ford New

#ad
Hydraker #ad - Hole sizes include: 1/4”, 3/8” x 5/8”, 3/8”, 3/4” x 3/8” and 1 1/2” x 1 1/2”. Motor engine lifting plate Bracket Plate thickness is 3/16”. Seals intake for safe storage. Fits carburetors: standard holley 4150/4160 4500 Dominator Rochester Quadrajet Carter Motorcraft Edelbrock Edelbrock Q-Jet Carter AFB. Easy engine swaps, allows engine to be lifted with an engine hoist.
BrandHydraker #ad
ManufacturerHydraker #ad
Part NumberS16

4. JYAU

#ad

For use with Lifting Slings and Load Levelers, Engine Support Bar, JYAU 7100 Capacity Lifting Bracket Set, Can Withstand 4000 pounds Capacity

#ad
JYAU #ad - Fit type: Universal. Part number: jyaUOT00672. The bracket kit has a load capacity of 4, 000 pounds, long life, and hard. This component should be used with Load Levelers and Lifting Slings to assist in lifting most engines and heavy parts.

The lifting bracket kit is made of high-quality steel material, strong and durable. 7100 lifting bracket set can be used to lift engines or other heavy parts, help transform heavy equipment and engines, they are ideal tools for workshops and garages. A lifting bracket kit is a set of 2 brackets, the maximum acceptable bolt diameter is 1/2 inch. It can also be used for other purposes. The engine support bar can be directly bolted to the lifted part.
BrandJYAU #ad
ManufacturerJIUYI #ad
Part NumberJYAUOT00672

5. BIG RED

#ad

3/4 Ton 1,500 lb Capacity, Red, BIG RED T32100 Torin Engine Hoist Shop Crane Accessory: Steel 3 Position Engine Leveler with Adjustable Handle

#ad
BIG RED #ad - Engine leveler has a 3/4 ton 1, top quality structural steel; It's ideal for garage, workshop, 500 lb load capacity and is made from rugged, and agricultural jobs. Features 4 14" length chains, each equipped with an L-bracket assembly. Simply attach the chains to the engine and use the crank handle for quick and ease adjustments with the threaded shaft, which balances the load with ease. Fully adjustable, with 3 position chain mount holes to accommodate various engine configurations.
BrandBIG RED #ad
ManufacturerTorin Shop Equipment #ad
Height8.46 Inches
Length18.9 Inches
Weight2.5 Pounds
Width9.84 Inches
Part NumberT32100
ModelT32100
WarrantyONE YEAR

6. Performance Tool

#ad

Engine Lift Chain.

#ad
Performance Tool #ad - Maximum load: 1, 000 lb. Ideal use: assists in lifting most engines and heavy components from chassis. Capacity: 250lb weight limit. Link locking: Securely balances weight for slip free lifting. Durable material: Heat treated alloy steel for long-lasting use.
BrandPerformance Tool #ad
ManufacturerPerformance Tool #ad
Height7.6 Inches
Length2 Inches
Weight2.6 Pounds
Width6.3 Inches
Part NumberW41032
ModelW41032
WarrantyLifetime

7. Oberg Tilt Lift

#ad

Oberg Tilt Lift, Engine Hoist Sling | No Chain Hoist Hassle | 1 Ton Capacity | 45 Degree Tilt | Single Hand Operation | Easy Engine Swap | Mounting Cleats Fasten to Any Engine | 3 to 1 Safety Factor

#ad
Oberg Tilt Lift #ad - Avoid power tools as it will turn the drum too quickly and cause the cable to get tangled. Our sling has a 3 to 1 safety Factor tested up to 6, 000 lbs. And weighs only 4 Lbs. Capacity and has a 3-to-1 safety rating tested to 6, 000 lbs. One half turn of the drum with a regular half-inch ratchet or half-inch breaker bar will tilt an engine up to 45 degrees.

For best performance, occasionally apply lubricant to the drum body and cable front and back. Use of power tool will void the tilt lift 1 year warranty. Making it compact and easy to Store. Our hoist sling comes with lever locks that hold into place at exact angles needed to lift or lower your engine in as little as 1/4" increments, using a 1/2" ratchet or breaker bar. We recommend a spray lubricant or white grease.

Our hoist sling can handle a 2000 lb. Mounting cleats fasten to any engine allowing for quick and easy engine AND transmission swaps! The oberg tilt lift engine sling allows you to progressively tilt and lift the engine up to 45 degrees in either direction. This makes it easy for one-handed adjustment! Our lift has been making engine swaps easy for decades! our upgraded steel components provided greater strength and better control of cable to eliminate possibility of crossover.
BrandOberg Tilt Lift #ad
ManufacturerStricklin Company #ad
Height1.5 Inches
Length7.5 Inches
Weight4 Pounds
Width3.5 Inches
Part Number53873 02000
Model2000

8. ProForm

#ad

Proform 67457 Engine Lift Plate

#ad
ProForm #ad - Part number: 67457. Package weight : 37. 15 pounds. Country of origin : Taiwan, Province Of China. Package dimensions: 19. 49 l x 8. 02 h x 11. 38 w inches.
BrandProForm #ad
ManufacturerProform #ad
Height5.5 Inches
Length9.5 Inches
Weight2 Pounds
Width7.25 Inches
Part Number67457
Model67457

9. Performance Tool

#ad

Performance Tool W41034 1/2 Ton 1,000 lbs. Capacity Universal Engine Lift Plate , Gold

#ad
Performance Tool #ad - Vehicle maintenance: Makes removing or installing engines with or without the transmission easy. Heavy duty: made with durable materials that will last in any garage, vehicle maintenance bay, or automechanic workshop. Universal design: Fits more than 90% of common applications including dominator manifolds. Simple attachment: 3 large holes on plate allow easy attaching for chains or hooks. Maximum load: 1, 000 lbs. 1/2 ton capacity.
BrandPerformance Tool #ad
ManufacturerPerformance Tool #ad
Height9.9 Inches
Length2.6 Inches
Weight2.85 Pounds
Width7.8 Inches
Part NumberW41034
ModelW41034
WarrantyLifetime

10. Spectre Performance

#ad

Spectre Performance SPE-903 903 Carburetor Lift Plate

#ad
Spectre Performance #ad - Mounts to intake manifold. Seals intake for safe storage. Fit type: Vehicle Specific. Allows engine to be lifted with an engine hoist.
BrandSpectre Performance #ad
ManufacturerSpectre #ad
Height2.3 Inches
Length6.5 Inches
Weight2.45 Pounds
Width6 Inches
Part Number903
ModelSPE-903
Warranty3 Months