As an Amazon Associate I earn from qualifying purchases.
Bursting Pressure: 2000psi. Maximum working pressure: 500psi. Nylon and stainless steel braided fuel line can be compatible with transmission fluid, pump gas, race gas, hydraulic fluid, coolant, vacuum, oil, diesel and fuel.

Please make sure the pressure and temperature range is suitable for your application before purchase. Hose od: 0543inch.
Please measure before purchase! Warranty: evil energy offers 3-month warranty for the braided fuel line. Commonly used as transmission oil cooler line, oil feed line, fuel supply line, vacuum, pump gas, oil, coolant, carburetor fuel hose, fuel return line, hydraulic fluid, turbo cooler line, ls swap fuel line. Bursting pressurepsi: 2000psi. Black braided steel fuel hose maximum working pressure psi: 500 psi.

Ptfe tube fuel line length: 25Ft, Inner Diameter: 5/16". A ptfe tube has less volumetric expansion than a rubber tube and is non age sensitive for an unlimited shelf life. Ptfe fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line.
The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, diesel, 6AN braided fuel line's service life will be influenced.

These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly. Swivel hose end can be reused and recycle if you do not want them to stay in the original place.
Evil energy provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service. Can be suitable for competition applications where reduced weight is needed. Our swivel fitting is work with nylon braided fuel hose. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends.

Package: 4pcs black hose pipe clamp. Material: lightweight aluminum alloy 6061-T6 anodized finish hose end cover and 201 stainless steel worm gear clamp.
Any problem you have, please contact us via Amazon message. Compared with other clamps, you can disassemble and install it easily, it can provide a good look finish while also firmly fixing your project. Evil energy provide hose finisher clamp 3-month warranty. Feature: there is a captive screw on the hose end clamp, and can also be reused.


Inner diameter: 5/16". Outside Diameter: 0465inch. Black braided ptfe fuel line can be used as fuel injection hose, EFI fuel line, transmission oil cooler line, vapor return line, fuel return line, turbo oil feed and boost line, ls engine swap fuel line, carb fuel line, vacuum line, fuel supply line and other high temperature high pressure applications.
Please measure before purchase! Fit for 6AN PTFE hose end fitting ONLY. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Maximum working pressure psi: 3000 psi. Ptfe hose relatively hard, it can't be bend and folding in half. Bursting pressure psi: 10000psi. Professional installation is highly recommended. 6an ptfe fuel injection fuel line length: 20 feet6m.


Maximum working pressure psi: 3000 psi. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. Bursting pressure psi: 10000psi. Ptfe hose relatively hard, it can't be bend and folding in half.
The an6 nylon and stainless steel braided ptfe fuel injection line kit includes: 6pcs 6an ptfe hose end fittings 2pcs straight, 2pcs 45 degree, 2pcs 90 degree and AN6 PTFE braided fuel line Length: 10feet. Outside Diameter: 0465inch. Please measure before purchase! working temperature range: -76℉ to 446℉ -60℃ to 230℃.

Professional installation is highly recommended. Please measure before purchase! Black braided ptfe fuel line can be used as fuel injection hose, efi fuel line, turbo oil feed and boost line, vacuum line, transmission oil cooler line, fuel return line, vapor return line, ls engine swap fuel line, carb fuel line, fuel supply line and other high temperature high pressure applications.
The an6 nylon and stainless steel braided ptfe fuel injection line kit includes: 10pcs 6an ptfe hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree and AN6 PTFE braided fuel line Length: 16feet. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. Braided fuel hose Inner Diameter: 5/16". Bursting pressure psi: 10000psi.
1. EVIL ENERGY
#ad
EVIL ENERGY 6AN Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE 20FT Black
#adEVIL ENERGY #ad - Length: 20 Feet. Inside diameter: 11/32". Outside diameter: 054inch. Please measure before purchase! Evil energy provide this product 3-month warranty.Bursting Pressure: 2000psi. Maximum working pressure: 500psi. Nylon and stainless steel braided fuel line can be compatible with transmission fluid, pump gas, race gas, hydraulic fluid, coolant, vacuum, oil, diesel and fuel.
More information #ad
Application: an6 braided fuel line widely used as transmission cooler line, fuel supply line, coolant fluid hose, fuel return line, engine cooler line. Temperature range: -40℉ to 257℉. Any problem you might have, please feel free to contact us via Amazon message.Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Height | 3.54 Inches |
Length | 9.25 Inches |
Width | 8.66 Inches |
Part Number | 4712BK-6 |
More information #ad
2. EVIL ENERGY
#ad
EVIL ENERGY 6AN Fuel line Hose Fitting Kit Braided Nylon Stainless Steel Oil Gas CPE 20FT Black Hose ID: 0.34inch
#adEVIL ENERGY #ad - Hose id: 11/32". The 6an nylon braided fuel line kit includes: 10pcs 6an swivel hose ends 4pcs straight, 2pcs 180degree, 2pcs 90degree, 2pcs 45degree, 2pcs 6an hose separator clamp and 6an braided fuel line Length: 20 Feet. Nylon and stainless steel braided cpe fuel hose can be used with transmission fluid, coolant fluid hose, race gas, diesel and fuel.Please make sure the pressure and temperature range is suitable for your application before purchase. Hose od: 0543inch.
More information #ad
Professional installation is highly recommended. Working temperature range: -40℉ to 257℉-40℃ to 125℃. Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use. Please measure before purchase! Warranty: evil energy offers 3-month warranty for the braided fuel line. Commonly used as transmission oil cooler line, oil feed line, fuel supply line, vacuum, pump gas, oil, coolant, carburetor fuel hose, fuel return line, hydraulic fluid, turbo cooler line, ls swap fuel line. Bursting pressurepsi: 2000psi. Black braided steel fuel hose maximum working pressure psi: 500 psi.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Height | 3.54 Inches |
Length | 8.66 Inches |
Width | 7.87 Inches |
Part Number | FBA-KT01269AN6BK-HW |
More information #ad
3. EVIL ENERGY
#ad
EVIL ENERGY 6AN 3/8" PTFE EFI LS Fuel Injection line Fitting Kit Stainless Steel Braided 25FT
#adEVIL ENERGY #ad - Outside Diameter: 0465inch. We value your shopping experience and strive to provide quality product and service. Bursting pressurepsi : 10000psi. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use. Evil energy provide this product have 3-month warranty.Ptfe tube fuel line length: 25Ft, Inner Diameter: 5/16". A ptfe tube has less volumetric expansion than a rubber tube and is non age sensitive for an unlimited shelf life. Ptfe fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line.
More information #ad
Maximum working pressurepsi : 3000psi. The 6an ptfe fuel line mostly used in efi ls system and can be worked with petrol, coolant, E85, oil, pump gas, alcohol, hydraulic fluid, fuel. Professional installation is highly recommended. The 6an ptfe hose working temperature range: -76℉ to 446℉ -60℃ to 230℃. Please measure before purchase! 25ft 6an braided fuel injection line kit includes fuel ptfe tube and aluminum alloy fitting adapter: 6pcs 6an ptfe straight hose end, 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN PTFE 45 Degree hose end, 1pc 6AN to 5/16" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting, 1 pc AN6 to 3/8"quick disconnect male. The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, diesel, 6AN braided fuel line's service life will be influenced.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Part Number | EV01486BK |
More information #ad
4. EVIL ENERGY
#ad
EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS
#adEVIL ENERGY #ad - Black anodized for great appearance and anti-corrosion, superior thread strength. Connect oil gas line, braided fuel line, turbo line etc. Swivel fittings are easy to use and don't require special equipment. Working temperature range: -65℉ to 252℉ (-53℃ to 122℃.These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly. Swivel hose end can be reused and recycle if you do not want them to stay in the original place.
More information #ad
Max working Pressure: 1000psi. Package: 2 PCS. We normally recommend a bit of assembly lube to help prevent any galling. The female an6 swivel fittings are made of lightweight aluminum alloy 6061-t6 material for strong strength and good durability. Evil energy provide this product have 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service. Can be suitable for competition applications where reduced weight is needed. Our swivel fitting is work with nylon braided fuel hose. Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Part Number | EV00509D0 |
More information #ad
5. EVIL ENERGY
#ad
EVIL ENERGY 6AN Hose Finisher Clamp, Hex Hose End Finisher with Clamp Aluminium Black Pack of 4
#adEVIL ENERGY #ad - Commonly used to connect flexible hose tube, rubber fuel line, nylon braided fuel line and stainless steel braided fuel line. Please measure your OD size before purchase. Application: universal works with fuel / diesel / gas / air / oil / water and vacuum Hose.Package: 4pcs black hose pipe clamp. Material: lightweight aluminum alloy 6061-T6 anodized finish hose end cover and 201 stainless steel worm gear clamp.
More information #ad
Size: 6an hex hose finisher clamp, fit for 3/8 fuel hose, adjustable design can be used to connect max outer diameter flexible rubber fuel hose is 15mm. Any problem you have, please contact us via Amazon message. Compared with other clamps, you can disassemble and install it easily, it can provide a good look finish while also firmly fixing your project. Evil energy provide hose finisher clamp 3-month warranty. Feature: there is a captive screw on the hose end clamp, and can also be reused.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Part Number | EV00884SAN6BK |
More information #ad
6. EVIL ENERGY
#ad
EVIL ENERGY 6AN Hose Separator Clamp,3/8 Fuel Line Mounting Clamp,Fuel Hose Divider for Oil Gas Water Brake Line,4Pcs Aluminum Black
#adEVIL ENERGY #ad - Material: Aluminum alloy. Evil energy provide this product have 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message. Fuel line separator clamp: Secure and separate transmission lines to keep your project clean and organized.More information #ad
Application: this 6an fuel line divider fits for most 6AN hose, water pipe, oil lines, such as fuel lines, brake lines, gas lines, etc. Size:inside diameter: 051inch /13mm, please mesure the OD of your hose before purchase.Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Part Number | KT00503AN6BK-AMZ1 |
More information #ad
7. EVIL ENERGY
#ad
EVIL ENERGY 6AN PTFE E85 Hose Braided Fuel Injection Line 20FT Nylon Stainless Steel Black Hose ID: 0.315 Inch
#adEVIL ENERGY #ad - Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. An-6 nylon and stainless steel braided high pressure PTFE fuel line holds up a lot stronger to heat and extreme circumstances.Inner diameter: 5/16". Outside Diameter: 0465inch. Black braided ptfe fuel line can be used as fuel injection hose, EFI fuel line, transmission oil cooler line, vapor return line, fuel return line, turbo oil feed and boost line, ls engine swap fuel line, carb fuel line, vacuum line, fuel supply line and other high temperature high pressure applications.
More information #ad
Please measure before purchase! Fit for 6AN PTFE hose end fitting ONLY. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Maximum working pressure psi: 3000 psi. Ptfe hose relatively hard, it can't be bend and folding in half. Bursting pressure psi: 10000psi. Professional installation is highly recommended. 6an ptfe fuel injection fuel line length: 20 feet6m.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Weight | 2.54 Pounds |
Part Number | EV-00421BK-6 |
More information #ad
8. EVIL ENERGY
#ad
EVIL ENERGY 6AN PTFE Hose End Fitting Straight Black for PTFE Hose Only
#adEVIL ENERGY #ad - Thread size of 6an ptfe fitting is 9/16-18unf and the PTFE fuel line which works with should be 3/8". We value your shopping experience and strive to offer a high-quality product and service. Warrany: evil energy provide ptfe hose end 6-month warranty.More information #ad
The ptfe hose end is reusable, just replace a new ferrule if you reinstall the fitting. Please attention that the 6an ptfE hose end can be work with PTFE fuel line ONLY. Evil energy provide plently kind of fuel fittings, Swivel, push-on lock, PTFE hose end and other fitting adapters.Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Part Number | CS00326D0 |
More information #ad
9. EVIL ENERGY
#ad
EVIL ENERGY 6AN PTFE E85 Hose Braided Fuel Injection Line Fitting Kit 10FT Nylon Stainless Steel Black Hose ID: 0.315inch
#adEVIL ENERGY #ad - An-6 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances. Professional installation is highly recommended. Braided fuel hose Inner Diameter: 5/16".Maximum working pressure psi: 3000 psi. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. Bursting pressure psi: 10000psi. Ptfe hose relatively hard, it can't be bend and folding in half.
More information #ad
Black braided ptfe fuel line can be used as fuel injection hose, carb fuel line, fuel return line, EFI fuel line, ls engine swap fuel line, transmission oil cooler line, turbo oil feed and boost line, vacuum line, vapor return line, fuel supply line and other high temperature high pressure applications. The an6 nylon and stainless steel braided ptfe fuel injection line kit includes: 6pcs 6an ptfe hose end fittings 2pcs straight, 2pcs 45 degree, 2pcs 90 degree and AN6 PTFE braided fuel line Length: 10feet. Outside Diameter: 0465inch. Please measure before purchase! working temperature range: -76℉ to 446℉ -60℃ to 230℃.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Height | 3.15 Inches |
Length | 4.72 Inches |
Weight | 1.06 Pounds |
Width | 2.36 Inches |
Part Number | KT00615AN6BB |
More information #ad
10. EVIL ENERGY
#ad
EVIL ENERGY 6AN PTFE E85 Hose Braided Fuel Injection Line Fitting Kit 16FT Nylon Stainless Steel Black Hose ID: 0.315inch
#adEVIL ENERGY #ad - Ptfe hose relatively hard, it can't be bend and folding in half. Working temperature range: -76℉ to 446℉ -60℃ to 230℃. Outside Diameter: 0465inch. Maximum working pressure psi: 3000 psi. An-6 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances.Professional installation is highly recommended. Please measure before purchase! Black braided ptfe fuel line can be used as fuel injection hose, efi fuel line, turbo oil feed and boost line, vacuum line, transmission oil cooler line, fuel return line, vapor return line, ls engine swap fuel line, carb fuel line, fuel supply line and other high temperature high pressure applications.
More information #ad
The an6 nylon and stainless steel braided ptfe fuel injection line kit includes: 10pcs 6an ptfe hose end fittings 4pcs straight, 2pcs 45 degree, 2pcs 90 degree, 2pcs 180 degree and AN6 PTFE braided fuel line Length: 16feet. Ptfe lined hose can be compatible with all automotive fuels, lubricants, and coolant. Braided fuel hose Inner Diameter: 5/16". Bursting pressure psi: 10000psi.
Brand | EVIL ENERGY #ad |
Manufacturer | Speedwow Tuning #ad |
Weight | 2.54 Pounds |
Part Number | FBA-KT00467BB |
More information #ad