Top 10 Induction Heater Kit – Heaters & Heater Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Induction Innovations

#ad

Induction Innovations MD-700 Mini-Ductor II Magnetic Induction Heater Kit

#ad
Induction Innovations #ad - Led at terminal end provides for work area illumination. Operates on standard 110v/10 amp circuit. Grenade grip for better handling. Completely hand-held, ergonomic, grenade style grip and a bright LED to illuminate work area. The mini-ductor ii md700 1, 000w hand held induction power inverter. Also great for hail dent removal. Releases thread lock compounded nuts, frozen manifold bolts, bearings and more. Works with all the mini-ductor coils and attachments.
BrandInduction Innovations #ad
ManufacturerInduction Innovations #ad
Height17 Inches
Length10 Inches
Weight5.2 Pounds
Width5 Inches
Part NumberICT-MD-700
ModelICT-MD-700
Warranty1 YEAR WARRANTY ON MATERIAL AND WORKMANSHIP

2. TaiShi

#ad

110V 1000W Magnetic Induction Heater Kit For Automotive Flameless Heat

#ad
TaiShi #ad - Heats and expands frozen, rusted or thread-lock compound nuts without flame damages. The inductor is a hand-held one with slip-resist ergonomic housing; Faster and safer than traditional torch. It adopts high frequency magnetic fields to heat up metal ONLY with induction heat. A flameless solution for releasing metal hardwares and components from corrosion. Loosen seized hardware, gears, fuel tank straps, PDR applications paint-less dent repair, in-line applications, pulleys, bearings, lug nuts, etc.
BrandTaiShi #ad
ManufacturerTaiShi #ad

3. KOOBOOK

#ad

KOOBOOK 1Pcs 1000W ZVS Low Voltage Induction Heating Board Module Flyback Driver Heater 12V-48V DIY

#ad
KOOBOOK #ad - The kit contains a full set of driving circuit elements and brass. Buyers need to bring their own power and cooling unit. The higher the voltage, so to eradicate the actual situation to select the input voltage, the greater the heating current when the same thing, the effect is better.

But at the same time heat is also large, the general use of the words 24V or 36V power supply is enough. Can only be used for small parts diy players do hardening, annealing and other heat treatment. Also can be used with a graphite crucible melting gold, copper, aluminum and other metals, silver, uniform heating fast, very convenient. Not for industrial production.

This section of induction heating using low-voltage DC power supply 12-48V, maximum power 1000W, maximum current 20A, long-time working power 500-800W. The circuit board using double-sided fiberglass board, please add a fan to blow down from above, continuous work, mainly copper traces are used to widen use the entire back surface of the resonant circuit common, to the resonance capacitors and other components cool.
BrandKOOBOOK #ad
ManufacturerKOOBOOK #ad
Part NumberKB505

4. TOOLGUY REPUBLIC

#ad

7 Coils + 1 Free Forming, Induction Heater Coil Kit

#ad
TOOLGUY REPUBLIC #ad - Includes 7 of the most popular coil sizes plus 1 free forming coil. Includes plastic storage case. Free forming coil measures 36". Coil diameters range from: 1/2”, 1”, 1-1/4”, 7/8”, 3/4”, 1-1/2”, 2” Flat. For removing rusty bolts and nuts.
BrandTOOLGUY REPUBLIC #ad
ManufacturerTool Guy Republic #ad

5. LOYALHEARTDY19

#ad

European Induction Heater,1000W Mini Ductor Magnetic Induction Heater Kit 110V Automotive Flameless Heat

#ad
LOYALHEARTDY19 #ad - Keep your work area clean and well illuminated. Do not use in moist surroundings or immerse it in water to electrical shock hazard and machine damage. Usa stock! free shipping! European induction heater a flameless solution for releasing metal hardwares and components from corrosion.

Loosen seized hardware, fuel tank straps, lug nuts, bearings, PDR applications paint-less dent repair, in-line applications, gears, pulleys, etc. European induction heater safety rules read manual carefully before using. Warranty: 100% money back guarantee for worry-free purchasing. If you have any questions, please feel free to contact us, LOYALHEARTDY19 will spare no effort to help you.

Heats and expands frozen, rusted or thread-lock compound nuts without flame damages. European induction heater it adopts high frequency magnetic fields to heat up metal ONLY with induction heat. Do not overreach, keep proper footing and balance at all times, proper footing and balance enables better control.
BrandLOYALHEARTDY19 #ad
ManufacturerDY19 #ad

6. Solary

#ad

Magnetic Induction Heater Kit Preformed Coil Mini Ductor Long Coil Kit for MD-700 1/2-inch to 1-3/4-inch 1 Set 9 PCS Tube coils, Solary Induction Essential Coil Kit

#ad
Solary #ad - The coil will last for approximately 100 uses or more subject to use. Resistant to elevated temperatures 400-600 Degree. All coils are coated to eliminate oxidation and guarantee contact. Great flexibility and versatility, Covered terminals for superior safety protection. Reinforced heat stabilized thermoplastic housing provides for increased durability inside and out.
BrandSolary #ad
ManufacturerSolary electric equipment Co., Ltd. #ad
Part NumberH7 coils-7

7. Ketofa

#ad

Magnetic Induction Heater Kit Mini 110V Ductor Magnetic Induction Heater Tool with Coils Bolt Heat Remover for Automotive Flameless Heat Induction Hand Tool Kia-1000 Car Disassembly Repair Tool

#ad
Ketofa #ad - Easy to use--light weight, do not need water cooling, and very easy to use. A bright led light exists to light up your work load. More efficiency--faster and safer than traditional torch. The advantage if using this device is it is totally flameless.

In around 30 seconds, it can heat a 20mm diameter bolt to a temperature above 300ºC, maximum temperature can reach around 750ºC. Good compatibility- an induction heater is a key piece of equipment used in all forms of induction heating. Without the worry of harming the adjacent area. It adopts high frequency magnetic fields to heat up metal ONLY with induction heat. Wide range of applications--a flameless solution for releasing metal hardwares and components from corrosion.

Loosen seized hardware, pulleys, fuel tank straps, in-line applications, PDR applications paint-less dent repair, gears, bearings, lug nuts, etc. Heats and expands frozen, rusted or thread-lock compound nuts without flame damages. Working principle--the inductor is a hand-held one with slip-resist ergonomic housing.
BrandKetofa #ad
ManufacturerMagnetic Induction Heater Kit #ad

8. LianDu

#ad

LianDu 1000W Mini Ductor LED Magnetic Induction Heater Kit with 3 Coils for Automotive Flameless Heat Hand Tool US Stock

#ad
LianDu #ad - Function & featuresa flameless solution for releasing metal hardwares and components from corrosion. Wide applicaitonloosen seized hardware, gears, bearings, fuel tank straps, pulleys, in-line applications, PDR applications paint-less dent repair, lug nuts, etc.

Main paramters voltage: 110v, wattage: 1000w, illumination: led light at the end, gross weight: 3.3kg, induction coil diameter*quantity:Φ20mm*1,Φ25mm*1,Φ30mm*1, Package Dimensions L x W x H: 43x305x11. 5cm. High efficiency it adopts high frequency magnetic fields to heat up metal only with induction heat.

A flameless solution for releasing metal hardwares and components from corrosion. Heats and expands frozen, rusted or thread-lock compound nuts without flame damages. Ergonomic designthe mini inductor is a hand-held one with slip-resist ergonomic housing; Faster and safer than traditional torch. Led light at terminal end provides for work area illumination.
BrandLianDu #ad
ManufacturerLianDu #ad
Part NumberOT-HJWJL-2249

9. Induction Innovations

#ad

Induction Innovations MD99-660 Essential Coil Kit

#ad
Induction Innovations #ad - The coil insulation is coated to resist abrasion. The coils each last for several hundred uses or more subject to use. The coils are all flexible and can be bent or separated for a variety of applications. Includes 8 of the most used smaller diameter coils of varying lengths for removing stuck fasteners. Use of the proper size coil, avoiding abrasion and overheating prevents premature wear to the coil.
BrandInduction Innovations #ad
ManufacturerInduction Innovations #ad
Height5 Inches
Length20 Inches
Width4 Inches
Part NumberMD99-660
ModelMD99-660

10. Induction Innovations

#ad

Induction Innovations MD99-675 Mini Ductor Long Coil Kit

#ad
Induction Innovations #ad - The coils each last for several hundred uses or more subject to use. Use of the proper size coil, avoiding abrasion and overheating prevents premature wear to the coil. 8 interchangeable coils heat fasteners up to 1 1/2" in dia & the long coils offer reach up to 13. 25. The coils are all flexible and can be bent or separated for a variety of applications. All coils are plated to eliminate oxidation and guarantee contact.
BrandInduction Innovations #ad
ManufacturerInduction Innovations #ad
Height5 Inches
Length20 Inches
Weight1 Pounds
Width4 Inches
Part NumberMD99-675
ModelMD99-675