As an Amazon Associate I earn from qualifying purchases.
1. IATCO #ad
Screws & Washers, 8" Hose, Grommet, IATCO 4305230-IAT Inspection Plate Kit Includes Cover #adIATCO #ad
- Includes screws & washers. Opposite side & diagonal screw holes for easy removal. Includes 8" grease hose. Replaces 4305230 .
2. KIMISS #ad
5in Stainless Steel Deck Hatch Cover Stainless Steel Inspection Hatch With Key For Marine Boat Hardware Accessory, KIMISS Deck Plate #adKIMISS #ad
- In addition, drawers, doors, it comes with a key, which can provide a lot of convenience for your daily use. Easy to install - small size, easy to install, easy to install, light weight, compact design, bringing you more convenience. Multi-purposes - it has a wide range of uses, and can be used as the entrance and exit of many places such as cabinets, walls, and countertops.
Highest quality - marine yacht accessories are made of high-quality 316 stainless steel, rust-proof and durable. You can enter under the deck without using any tools, which is perfect for your boat/yacht.
Perfect boat partner - the low profile design ensures the safety of the deck without loss of durability. Professional manufacturing, no complicated steps can be installed, can directly replace the old or damaged one.
Fine workmanship, is not easy to rust, can provide high-quality add-ons The mirror surface has excellent gloss after polishing, fine gloss, durable, sturdy, mirror polished, and can be used for a long time. Standard process - based on strict quality control standards, the design has been improved to improve quality and performance. High-quality materials can ensure maximum strength and durability, which can be used for a long time.
3. Eaglerich #ad
Eaglerich 6inch Boat Access Hatch Cover/Deck Plate/Inspection Hatch for Boat Marine Waterproof Inspection Bayonet Stainless Steel #adEaglerich #ad
- This high quality waterproof inspection deck plate is well received all the year raound, keeping a low profile for deck safety without loss of durability. Strong design access, impact and corrosion resistant.
Simple installation and usage takes all your worries away. Heavy duty lid with non-slip, mirrow polished surface. Manufactured of 316 marine grade stainless steel, this deck plate wil retain an attractive, clean finish with low maintenance for the discriminating yachtsman, outside of a long service life.
4. Speedmaster #ad
PCE265.1061 compatible with Chevy SBC 350 2-Piece Polished Aluminum Timing Chain Cover w/Inspection Plate #adSpeedmaster #ad
- Nhra top fuel Team. 8 time sema product Award Winners. Free shipping Over $10012 month warranty & Lifetime Support. 5 million Items Shipped Worldwide.
5. Gazechimp #ad
Gazechimp Pack of 3, White Circular Non Slip Inspection Hatch Screw Out Deck Plate for RV Marine Boat Kayak, 5 inch 12cm #adGazechimp #ad
- Separate cover plate and chassis, very easy to install. Made of abs plastic, anti-aging, anti-corrosive, ultraviolet resistant. Cut out size 5 1/2 inch; front measures 6 3/4 inch 172mm.
Weathertight and O-ring sealed deck plates are ideal for interior and exterior applications. Reinforced design with a non-slip surface.
6. Southwest Speed #ad
FLYWHEEL, PRESSURE PLATE, 10 SPLINE DISC, NEW RAM 11" CLUTCH & BELLHOUSING KIT WITH GM 621 3899621 ALUMINUM BELLHOUSING, SBC BBC CHEVY, FLYWHEEL INSPECTION COVER, CLUTCH FORK BOOT & CLUTCH PIVOT BALL #adSouthwest Speed #ad
- Fits: > 1964-1988 chevy chevelle, nomad, 66-81 corvette, caprice, malibu, brookwood, biscayne, kingswood, 68-72 nova, monte carlo* > 1959-1987 chevy el camino* > 1959-1988 chevy impala, 67-72 camaro, nova* > *with manual transmissions and 168 tooth flywheel The bellhousing was used with 4 speed transmissions in 66-72 Chevelle, sedan delivery* > 1963-1981 chevy corvette* > 1967-1981 chevy camaro* > 1968-1974 chevy ii, bel air, and 64-81 Impala.
This will make it a snap to get that big gm bellhousing in your muscle car or rod project > this new chevy high performance 11" style aluminum bellhousing was issued on Camaros, Yenko, Copo, and 454 engines, 427, as well as Yenko, 327, 350 and 400 with the 168 tooth, Chevelles, including Z28, 14" flywheels and 11" clutches, Impalas, and ZL1 and also small blocks like 302, Corvettes and Nova’s with big block 396, and Deuce models.
You can use one of the new bolt-in classic car conversion transmissions and still use all of the stock 4 speed Pedals and Rods with this bellhousing > Will not work on 1962-1967 Chevy II and Chevy Nova models as the size of the transmission tunnel is too narrow > Will not work on Monza or Vega as they both used a cable operated 105" clutch with the pivot on the other side. Brand new southwest speed and ram clutch aluminum bellhousing and 11" clutch kit for use with manual transmissions.
Fits transmissions with 1 1/8"-10 spline input shafts and chevy engines with a 2 piece rear main seal > the southwest speed 11" performance Cast Aluminum Bellhousing is a reproduction of the original 3899621 bellhousing used on GM models with Big Block and Small Block engines > This performance aluminum bellhousing does not have the GM Part # 3899621 casting number but will look, fit, and perform just like original > If you are doing a restoration of an early muscle car. The kit includes a replica gm 3899621 bellhousing, throwout bearing, pressure plate, and hardware Part # 650-39755, Clutch Fork with Ball Retaining Spring, Flywheel Inspection Cover, Clutch Disc, Clutch Fork Boot, Clutch Fork Pivot, Flywheel, 901080.
|Brand||Southwest Speed #ad|
|Manufacturer||Southwest Speed #ad|
7. MoreChioce #ad
6 Inches Marine Round Inspection Deck Plate Hatch,MoreChioce ABS Boat Deck Inspection Access Hatch Waterproof Marine Hatch Cover for Marine Boat Installation #adMoreChioce #ad
- Fit for: for boat yacht Marine Access Hatch Cover. Design: weatherproof and o-ring sealed cover plates are ideal for indoor and outdoor use, Reinforced design with non-slip surface.
Material: made of ABS material, anti-aging. Package includes: 1 × Deck Inspection Hatch. Easy to use: separate cover plate and chassis, easy to install, pre-drilled countersunk holes screws not included.
8. Southwest Speed #ad
SBC BBC CHEVY, 26 SPLINE DISC, FLYWHEEL, NEW RAM 11" CLUTCH & BELLHOUSING KIT WITH GM 621 3899621 ALUMINUM BELLHOUSING, PRESSURE PLATE, CLUTCH FORK BOOT & CLUTCH PIVOT BALL, FLYWHEEL INSPECTION COVER #adSouthwest Speed #ad
- You can use one of the new bolt-in classic car conversion transmissions and still use all of the stock 4 speed pedals and rods with this bellhousing > Will not work on 1962-1967 Chevy II and Chevy Nova models as the size of the transmission tunnel is too narrow > Will not work on Monza or Vega as they both used a cable operated 105" clutch with the pivot on the other side > The clutch fork was also angled about 45 degrees not straight across. The kit includes a replica gm 3899621 bellhousing, flywheel inspection cover, clutch fork boot, throwout bearing, clutch fork Pivot, Clutch Fork with Ball Retaining Spring, Flywheel, Pressure Plate, and hardware Part # 650-39755, Clutch Disc, 901180 > Fits transmissions with 1 5/32"-26 spline input shafts and Chevy engines with a 2 piece rear main seal.
Bearing retainer > will even work with the Tremec 5 and 6 Speed Transmissions. This new chevy high performance 11" aluminum bellhousing was issued on camaros, and zl1 and also small blocks like 302, copo, 14" flywheels and 11" clutches, corvettes and nova’s with big block 396, and 454 engines, Impalas, yenko, as well as yenko, 327, including z28, 350 and 400 with the 168 tooth, 427, chevelles, and Deuce models > Will accept your original Muncie or Saginaw Manual Transmission with a 4.6
675" o. D. Brand new southwest speed and ram clutch aluminum bellhousing and 11" clutch kit for use with manual transmissions.
Fits: > 1964-1988 chevy chevelle, biscayne, caprice, kingswood, brookwood, monte carlo* > 1959-1987 chevy el camino* > 1959-1988 chevy impala, nova* > *with manual transmissions and 168 tooth flywheel > the bellhousing was used with 4 speed transmissions in 66-72 chevelle, 67-72 Camaro, bel air, 68-72 Nova, sedan delivery* > 1963-1981 chevy Corvette* > 1967-1981 Chevy Camaro* > 1968-1974 Chevy II, 66-81 Corvette, nomad, Malibu, and 64-81 Impala. The southwest speed 11" performance cast aluminum bellhousing is a reproduction of the original 3899621 bellhousing used on GM models with Big Block and Small Block engines > This performance aluminum bellhousing does not have the GM Part # 3899621 casting number but will look, and perform just like original > If you are doing a restoration of an early muscle car, or just want the correct bellhousing to finish that rod project, fit, this bellhousing is the perfect part.
|Brand||Southwest Speed #ad|
|Manufacturer||Southwest Speed #ad|
9. Sea Dog #ad
Sea Dog 337150-1 Screw Out Deck Plate, 5-7/16" / White #adSea Dog #ad
- Molded to the highest standards using top quality UV stabilizers and antioxidants. Face plate dimensions: 6-3/4". Injection molded ABS. Deck plate dimensions: 5-7/16".
|Brand||Sea Dog #ad|
|Manufacturer||SEA-DOG LINE #ad|
10. Custom Accessories #ad
Custom Combos 92777 Clear Unbreakable Motorcycle License Plate Shield and Frame Combo with Chrome Frame #adCustom Accessories #ad
- Crystal clear cover is made from Polycarbonate producing an unbreakable domed protective shield for your license plate. The chrome frame adds durability.
Issued motorcycle license plate. Uv resistant stabilizer is incorporated into the Polycarbonate to prevent discoloration. Clear license plate cover is ideal for protecting your license plate. Universal sizing to fit any U. S.