Top 10 Lower Control Arm Ball Joint – Automotive Replacement Suspension Ball Joints

As an Amazon Associate I earn from qualifying purchases.

1. MOOG Chassis Products

#ad

MOOG Chassis Products K7411 Ball Joint

#ad
MOOG Chassis Products #ad - Comprehensive coverage -- available for foreign and domestic nameplates. Problem solver gusher bearing -- metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life.

Keeps dirt and water out -- pre-installed dust boot shields socket components from wear-causing contaminants. Greaseable socket -- reduces corrosion and wear by allowing new lubricant to flush contaminants. Easy to install -- precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box. Absorbs impact -- belleville preload washer helps keep the bearing package tight as bearings wear. Strong and durable  – ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength.
BrandMOOG Chassis Products #ad
ManufacturerFederal Mogul #ad
Height2.75 Inches
Length5.13 Inches
Weight1.3 Pounds
Width3.31 Inches
Part NumberK7411
ModelK7411
WarrantyLimited Warranty

2. DLZ

#ad

DLZ 2 Pcs Front Lower Control Arm and Ball Joint Assembly Compatible with Ford F-150 Pickup Truck 2005-2008 RWD and Lincoln Mark LT 2006-2008 K80403 K80401

#ad
DLZ #ad - Quality & delivery warranty: 1 Year Warranty for all parts you ordered. Compatibility information provided is for reference only. Important notice: before placing the order, please check your car model in the Fitment Filter System in the top left corner.

Front lower control arm only compatible with ford f-150 pickup truck 2005 2006 2007 2008(fit with 7 stud rotors/ford f-150 pickup truck 2004RWD only; Fits if the 11 digit of VIN is K, N, or F; Fits models with 7 stud rotor/Lincoln Mark LT 2006 2007 2008 Fits models with 7 stud rotor. Please make sure to match the exact part numbers between this part and the part that you are replacing.

Interchange part number of front lower control arm: 4l3z3079ba, 4l3z3078ca, 4l3z3079ca, mk80403; 4l3z3078ba, 7l3z3078C, 7l3z3078d, k80401, 7L3Z3079C, k80403, 7l3z3079d, MK80401. Package includes: both 2 front driver & Passenger Side Lower Control Arm & Ball Joint Assembly.
BrandDLZ #ad
ManufacturerPartsgoing #ad
Weight34.66 Pounds
Part NumberGPCM-0601293628

3. Detroit Axle

#ad

98-02 Lincoln Navigator, Detroit Axle, 97-02 Expedition, 1997 F-250, 2WD Model Complete Front Upper Control Arms & Ball Joints + Lower Ball Joints for 2WD ONLY, 1997-2003 Ford F-150

#ad
Detroit Axle #ad - Manufactured in ISO9002 Certified facility. Detroit axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket. 2wd 2 wheel drive rwD Rear Wheel Drive.
BrandDetroit Axle #ad
Height16 Inches
Length26 Inches
Weight12 Pounds
Width12 Inches
Part Number80203-4B

4. Detroit Axle

#ad

Both 2 Front Lower Control Arms w/Ball Joints Driver and Passenger Side for 2002 2003 2004 2005 Ford Explorer/Mercury Mountaineer, Detroit Axle, 4Door Only

#ad
Detroit Axle #ad - Detroit axle suspension parts are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs. For - 2002-2005 ford explorer 4-door models - 2002-2005 Mercury Mountaineer 4-Door Models. 10-year Warranty. Please check the compatibility and the view notes before purchasing the item, make sure it fits your vheicle.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height21 Inches
Length23 Inches
Width8 Inches
Part NumberK620490_K620491

5. Detroit Axle

#ad

GMC Envoy, Isuzu Ascender, Detroit Axle Pair 2 Front Driver & Passenger Side Lower Control Arm and Ball Joint Assembly for 2004 2005 2006 2007 Buick Rainer, Chevy Trailblazer

#ad
Detroit Axle #ad - Check compatibility Chart For Fitment. 2004-2007 buick rainier - 2004-2007 chevrolet trailblazer - 2004-2006 chevrolet trailblazer EXT - 2004-2007 GMC Envoy - 2004-2006 GMC Envoy XL. Detroit axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality. Complete control assembly arm pre-assembled With Bushings, Mounts & Ball Joints When Applicable - No additional parts or tools required for installation. 2004-2005 gmc envoy xuv - 2004-2007 isuzu ascender - 2004 oldsmobile Bravada - 2005-2007 Saab 9-7x.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Weight62 Pounds
Part NumberK620467_K620468

6. Detroit Axle

#ad

Both 2 Brand New Front Lower Driver & Passenger Side Control Arm and Ball Joint Assembly for Torsion Bar Suspension ONLY, Detroit Axle

#ad
Detroit Axle #ad - 1998-03 mazda b4000 4x4 torison bar - 2004-10 mazda b4000 torsion bar - 2001-03 Mazda B4000 2wd - 1997-01 Mercury Mountaineer. 1995-01 ford explorer - 1998-11 ford ranger torsion bar suspension - 2010 mazda B2300 2wd Torsion bar - 1999-00 Mazda B3000 2wd 16" wheel.

1998-02 mazda b3000 4x4 torsion bar - 2001-08 mazda b3000 2wd torsion bar - 1999-00 Mazda B4000 2wd 16" wheel. Detroit axle suspension control arms are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs. Complete control assembly arm pre-assembled With Bushings, Mounts & Ball Joints When Applicable - No additional parts or tools required for installation.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Part NumberK620319_K620320-DA

7. Detroit Axle

#ad

Detroit Axle, New 4pc: Front Lower Control Arms + Ball Joints + Sway Bar Links for Rendezvous

#ad
Detroit Axle #ad - Manufactured in ISO9002 Certified facility. Left right front lower control Arm Ball Joint Sway Bar End Link. Detroit axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality Aftermarket. Buick rendezvous 2002-2007 pontiac Aztec 2001-2005.
BrandDetroit Axle #ad
Height17 Inches
Length21 Inches
Weight22 Pounds
Width4 Inches
Part Number04-3230

8. Detroit Axle

#ad

Sway Bar Links 6pc Suspension Kit for Non Turbo Models Only, 11.8 Inch Center to Center, Outer Tie Rods, Detroit Axle 80008-6A Front Lower Control Arm & Ball Joint

#ad
Detroit Axle #ad - 11. 8 inch center to Center. Fits: chevrolet - malibu    2004-2012;    pontiac - g6    2005-2010;    Saturn - Aura    2007-2009;. Both 2 new lower control Arms w/ Ball Joints. Both 2 new outer Tie Rod Ends. Fits non turbo models only. Both 2 new front stabilizer Sway Bar End Links.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Height5 Inches
Length25 Inches
Weight25 Pounds
Width15 Inches
Part Number80008-6A

9. Detroit Axle

#ad

Front Lower Control Arms & Ball Joints for 2006 2007 2008 2009 2010 Hyundai Sonata, Detroit Axle

#ad
Detroit Axle #ad - Check compatibility Chart For Fitment. Kit includes: 2 front lower Control Arms & 2 Lower Ball Joints. Undergo impact, wear, and fatigue testing to help ensure quality and durability. For - 2006-2010 hyundai Sonata. Built to strict quality control standards.
BrandDetroit Axle #ad
ManufacturerDetroit Axle #ad
Weight40 Pounds
Part Number80676-4A

10. Hex Autoparts

#ad

Front Lower Control Arms with Ball Joints Pair compatible with 2007-2013 Nissan Altima 2013 Coupe ONLY

#ad
Hex Autoparts #ad - Fits both lh driver side or RH Passenger Side Front Lower. Compatible with 2007-2012 nissan Altima / 2013 Nissan Altima Coupe. Include ball joints & bushings. Comes as a pAIR, direct replacements. Built to strict quality control standards.
BrandHex Autoparts #ad
ManufacturerHex Autoparts #ad
Part NumberDO069
ModelDO069