Top 10 Panel Mounting Brackets – Solar & Wind Power Parts & Accessories

As an Amazon Associate I earn from qualifying purchases.

1. Link Solar


Boat, RV, Roof Off Grid 22-inch Length, Adjustable Solar Panel Mount Mounting Brackets Folding Tilt Legs

Link Solar #ad - Designed for solar systems, marine, motorhome, roofs, garages or other flat surfaces to tilt solar panels, sheds, can be used on RV, or ground. Note:at the time of installation, the mounting holes on your solar panel frame is required to be adjusted according to the mounting holes on our brackets.

Made from rust free aluminum with stainless steel hardware. Fasteners for attaching solar panel to mount includedEasy to fix and install. Comes with 4 rails, 4 flange nuts, 4 module bolts, 2 legs, 6 5/16"wing bolts, 6 5/16"wing nuts. Commonly mount the solar panel up to 100w, 12V. Also applicable to other specifications solar panels. Max solar panel width around 500~550mm. Especially beneficial over winter months when there is less sunlight. Gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead of laying them flat.
BrandLink Solar #ad
ManufacturerLINK SOLAR #ad
Height1.97 Inches
Length22.83 Inches
Weight1.48 Kilograms
Width1.18 Inches
Part NumberLS-AL-60F22

2. Newpowa


Wall and Ground Mounts Up to 60W, Newpowa Universal Solar Panel Mounting Bracket Single Arm Pole

Newpowa #ad - Works as a pole/wall/ground mounts, include all hardware Screws Washers & Clamps for 3-4 Inch pole. Suitable for most 30w-60w solar panel with a maximum Width of 21. 65inch. Rust free anodized aluminum with stainless street hardware. Single arm design pole, Wall Flat Surface Tilt & Adjustable Mounts. Diy may required for other Branded Solar Panels that came without Mounting Holes.
BrandNewpowa #ad
ManufacturerNewpowa #ad
Weight3 Pounds
Part NumberNPB-60P

3. Sunway Solar


Compatible with Renogy Solar Panel, Solar Panel Mounting Brackets Corner Mount Kits Supporting for Framed Solar Panels,Installation On RV Caravan Boats Camper Trailer Marine Motorhome House Roof

Sunway Solar #ad - The solar panel frame thickness can up to 40mm. It can mount almost any aluminum framed solar panels, newpow, hqst, compatible with renogy, eco worthy, suner power, richsolar and the other brand framed solar panel. Drill free or drill install mount--this universal solar mount is made from high quality abs super hard plastic.

It a set of mounting bracket that help to secure solar panel to a desired surface, such as on vehicle, marines, camping. Normally it is best for 20w, motor homes, roofs, 100watts, 150w, 30w, 50w, RVs, 200w solar panel. Easy to install on any flat surface--corner mount should be positioned around four corners of the solar panel. Side mounts can be used when the solar panel is so long & heavy that it might curve in the middle while it is lifted by the corner mounts.

Universal solar mounting brackets—this solar mount kit is so designed that it is applicable on solar panel of different size and different frame thickness. To add middle mounts onto middle section of the solar panel’s frame can solve this problem. At the same time, cold or humid weather, they can’t be influenced by hot, which prolong the products’ lifespan. Durable and long lifetime--the mounting brackets are are very strength and durable, which make the brackets not easy to be broken. They can resist ultraviolet light.
BrandSunway Solar #ad
ManufacturerSunway Solar #ad
Part NumberSW-MOUNT-01



ECO-Worthy Adjustable Multi-Pieces Solar Panel Mounting Brackets Kit System for 1-4pcs Solar Panels

ECO-WORTHY #ad - Eco-worthy multi-panels mount has the capability to fit 1-4pcs different size ECO-WORTHY panels or other brands standard panels. Galvanized steel construction, sturdy and durable.

Fixed on ground resistant wind and rain, well protect solar panel and easy to clean. It’s ideal for larger installations, such as ground, cabins and backyard sheds. Anywhere roof mounting is not a possibility, flat roof, this solar panel mount can be applied. You can put battery, controller, inverter at backside of the mounting system. Adjustable angle from 18° to 30° degree, right angle for best solar power. It can save lots of room and use solar power system easier. Three-legged structure make mounting steady. The multi-panel mount is compatible with the eco-WORTHY 100 Watts monocrystalline, and 120 Watts monocrystalline and 195 Watts solar panels.



Solar Panel Brackets White ABS Solar Panel Mounting Brackets 7 Drill-Free Corner Bracket Support Kit for Wood Frame RV Boat Campers Caravans Hood Corner Bracket,Side Bracket,Cable Entry Gland

POWOXI #ad - There is space to clean the bracket. Multiple protection of solar panel mounting brackets made of high-strength, its edges and four corners can protect the solar panel from damage. Widely used corner bracketideal for installation in rvs, campers, car hoods, caravans, sheds, garages, decks or other flat surfaces aluminum, roofs, wood or GPR materials.

Used as a windshield, two sizes of rubber rings, and the fixing head is no longer loose. Good for heat dissipation and cleaningthe strong side support of the solar system, the specially designed height is conducive to ventilation and heat dissipation, and maintains the cooling air gap between the solar panel and the roof / deck. Easier and more flexible to installno drilling is required, as long as it is bonded with sealant included. What you can get4 corner mounting brackets, 1 wrench, 1 sealing glue. If you want more stability, you can drill holes in the prepared holes on the side and fix solar panel bracket with screws not included.

It can be used with any aluminum frame solar panel with a side length of 30cm or longer. Perfect for large solar panels of 100W and above. Provide 12-month warranty and lifetime technical support, 2 cable fixing heads, 4 rubber seals, 3 stainless steel Self-tapping screws, 2 side mounting brackets, 1 waterproof solar cable entry gland, friendly customer service support. Pg7 waterproof cable glands are used in solar projects during the wiring process, the cable is no longer loose, UV-resistant and environmentally friendly ABS engineering plastics.
BrandPOWOXI #ad
ManufacturerPOWOXI #ad
Part NumberWhite Seven Mount Kit



AOOHOOA Solar Panel Mounting Z Brackets with Nuts and Bolts for RV Camper,Boat,Wall and Other Off Gird Roof Installation,A Set of 4 Units 2 Set

AOOHOOA #ad - High quality, light weightaoohooa solar mounting z brackets are designed of high quality aluminum material, making these light weight and aluminum will not rust, convenient for an everyday use. Excellent performancestrength and durable, cold or humid weather, makes the brackets not easy to be bent.

They can resist ultraviolet light. And they have the feature of high frequency insulation and anti-corrosion. At the same time, they can’t be influenced by hot, which prolong the products’ lifespan. Rich configurationthe mounting z brackets comes with all the necessary parts your solar panel mounted. Pre-assembled with bolts and washers. 1 sets of mount brackets of 4 units, with a gift one MC4 assembly tool.

Easy to installthe mounting z brackets is uniquely designed for an easy, hassle free, quick installation. Perfect for irregular surfaces. It is ideal for mounting small solar panels. Wide-applicationit easy to mount solar panels to recreational vehicles RV's, boats, motorhome, cabins or anywhere else where you need a simple yet reliable method to mount solar panels.
BrandAOOHOOA #ad
ManufacturerAOOHOOA #ad



RICH SOLAR Solar Panel Mounting Hardware Z Brackets for RV Roof Boat Set of 4 Units

RICH SOLAR #ad - Ideal for rigid solar panels. Pre-assembled with bolts and washers. Anodized aluminum. Firmly and safely mount solar panels to RVs, trailers, boats or yachts and any flat surface. Compatible with any RICH SOLAR brand rigid solar panels.
ManufacturerRICH SOLAR #ad

8. Newpowa


Off Grid Roof Installation A Sets of 4 Units Sliver Aluminum, Newpowa Solar Panel Mounting Z Bracket with Nuts and Bolts Supporting for RV, Wall, Boat

Newpowa #ad - Any problem feel free to contact us. Warranty:12-month warranty. Universal - suitable: this z bracket ideal for most 10W-200W Aluminum frame solar panels smaller gauge screws may be required for smaller panels.

Light weight but heavy duty: Made of rust-free anodized aluminum, use them to mount your panel easily. Larger panels may require more than 1 set for install. Wide range of application:can be used on irregular surfaces DIY may be required for panels without pre-drilled holes, Boat, Wall, Such as RV, Roof Off Grid installation. Package include: 4*z fixed bracket 4*Panel bolts and 6*Penetration screws.
BrandNewpowa #ad
ManufacturerNewpowa #ad
Height1.5 Inches
Length7.2 Inches
Width6.4 Inches
Part NumberNPB-UZ



RV, ECO-WORTHY 41" Adjustable Solar Panel Tilt Mount Mounting Brackets Boat, Roof Off Grid System41-inch Length

ECO-WORTHY #ad - Easy install - quick assembly with stainless steel fasteners and precise hole placement. Application - adjustable solar panel mounting brackets designed for off-grid solar systems, sheds, marine, motorhome, roofs, like RV, etc.

Efficiency - gain up to 25% more solar panel efficiency by tilting your panels towards the sun instead of laying them flat. The length and warranty - 545*1040*1040mm21. 46"x4094"x4094", if you don't find hardware in package pls contact us by email with photo, we will send replacement. Compatible with solar panel arrays about 100W~300W, or please match the width of panel around 41 inches.
ManufacturerECO-WORTHY #ad
Weight4.19 Pounds
Part NumberAM-L03TYNSJZJ3-1



ECO LLC 10 Sets 40pcs Solar Panel Z Mounting Bracket Kits Brackets W/Stainless Bolt

ECO LLC #ad - There are 40pcs "Z" shape surface mount brackets to ten sets. This system makes the installation of small solar systems easy, affordable and quick. Allowing sufficient air space for cooling solar panel. Ideal for caravans, motorhomes, campervans, boat ect. These brackets can be bolted to the rear of most framed solar panels.
BrandECO LLC #ad
ManufacturerECO LLC #ad