Top 10 TJ Winch Plate – Towing Winches

As an Amazon Associate I earn from qualifying purchases.

1. Smittybilt

#ad

Smittybilt Winch Plate for TJ/YJ/LJ factory bumpers , Black, 2802

#ad
Smittybilt #ad - Fits 1997 to 2006 tj wrangler, Rubicon and Unlimited. Made for 1/4 inch steel, powder coated black for long lasting durability. Raised winch plate to accommodate larger bumpers to eliminate roller fairlead interference. Supports up to a 10, 000 winch with standard bolt pattern, Mounting hardware included.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height5 Inches
Length39 Inches
Weight27.6 Pounds
Width10 Inches
Part Number2802
Model2802
Warranty5-Year limited

2. Smittybilt

#ad

2803, Smittybilt Winch Plate for TJ/YJ/LJ aftermarket bumpers

#ad
Smittybilt #ad - Black powdercoat finish for long lasting durability. Fits 1987-2006 wrangler tJ/YJ/LJ aftermarket bumpers. Supports up to a 12, 000 lb Smittybilt winch. Pre-drilled holes and include mounting hardware Some cutting required on OE bumper. Manufactured from 1/4" steel.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height9 Inches
Length35 Inches
Weight19 Pounds
Width3 Inches
Part Number2803
Model2803
Warranty3 Years

3. EAG

#ad

EAG Winch Mounting Plate, 12000 lbs Capacity Fit for 87-06 Jeep Wrangler TJ/YJ

#ad
EAG #ad - All mounting hardware included. The main compartment can accommodate up to a 12, 000 lbs winch. Made for 1/4 inch steel, powder coated black for long lasting durability. It allows the winch to be quickly installed and removed. Putting the winch fairlead on before install the winch and plate on the bumper. Easy bolt-on installation. Fit for 97-06 wrangler tj 4wd, 04-06 wrangler unlimited LJ 4WD, 87-95 Wrangler YJ 4WD. Raised winch plate to accommodate larger bumpers. Supports up to a 12, 000 winch with standard bolt pattern.
BrandEAG #ad
ManufacturerEAG #ad
Height3.15 Inches
Length34.26 Inches
Weight20.04 Pounds
Width8.67 Inches
Part NumberJTJML000
ModelT&HI-B00SKCTS8U

4. Smittybilt

#ad

Smittybilt 9500 lb 97495 XRC GEN2 Winch-9500 Pound Load Capacity

#ad
Smittybilt #ad - Completely waterproof, state-of-the-art 500AMP Solenoid. Load Capacity. Smittybilt recommends using supplied wiring. After 3 years, offers a limited lifetime for replacement to the original purchaser on stainless steel products.

6. Kit comes complete with all wiring required for installation. Smittybilt, 000 mile, powder coated products carry a 5-year or 100, whichever comes first. Waterproof ip67 rating ; it has a corded remote; Smittybilt 97495 XRC Winch - 9500 lb. Dual-stage, the is prorated up to 50 percent towards the replacement cost of the purchaser's original price. Fit type: Vehicle Specific. 6 hp amphibious motor and 3 Stage Planetary Gear System.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height22.3 Inches
Length5.4 Inches
Weight78 Pounds
Width9.4 Inches
Part Number97495
Model97495
Warranty3 Years

5. ECOTRIC

#ad

Front Bumper Winch Plate D-Ring Rock Crawler Black For 1986-2006 Jeep Wrangler TJ YJ

#ad
ECOTRIC #ad - Steel construction 2" X 120" wall. Overall dimension: 56"L x 12"W x 15"H. One-piece fully welded design. Two light tabs on the hoop for mounting extra lights.

For 2007-2018 rear bumper, you can search for the ASIN B07LF3QHKM. For 1987-2006 rear bumper, you can search for the ASIN B07MW2Q8TK. 100% brand new in stock. Fits up to 37" tire. Heavy duty steel construction with powder coat finish, textured black powder coat for corrosion protection and durability. Built in winch plate for mounting winch which is more than 9, 000Lbs. Built in safety catch for those uneven parking situations. Necessary hardware and installation instructions are included. Winch plate:24 X 7. For 2007-2019 front bumper, you can search for the ASIN B07M5GFG5V. Front bumper size:56"width x 7. 5" depth.
BrandECOTRIC #ad
ManufacturerECOTRIC #ad
Part NumberCA-110
ModelCA-110

6. Rugged Ridge

#ad

Rugged Ridge 11238.12 Raised Winch Plate

#ad
Rugged Ridge #ad - Limited 5 year warranty. Use with tube and other after market bumpers. Black Powder Coated. Limited 5 year warranty. 10 inch by 4. 5 inch bolt pattern.
BrandRugged Ridge #ad
ManufacturerRugged Ridge #ad
Height8 Inches
Length40 Inches
Weight25 Pounds
Width11 Inches
Part Number11238.12
Model11238.12
Warranty5 Year Limited

7. EAG

#ad

EAG Steel Front Bumper with Winch Plate Black Textured Fit for 87-06 Jeep Wrangler TJ YJ

#ad
EAG #ad - No cutting and no drilling required. D-rings are included-4. 75 ton capacity each. Manufactured from 5/32" cold rolled steel sheet and 2"x. 120 steel tubing. One piece welded design for ultimate strength. Textured black powder coat for corrosion protection and durability. D-ring mounts are welded both inside and out for increased strength. Two tabs on pre-runner hoop for extra off-road lights. Built-in winch plate for up to 12, 000 lbs. Winch. Fit for 1987-2006 jeep tj YJ Wrangler all models. Welded hoop protects the front of the Jeep Wrangler TJ.
BrandEAG #ad
ManufacturerEAG #ad
Height11.42 Inches
Length64.57 Inches
Weight58.86 Pounds
Width18.51 Inches
Part NumberJTJFB002
Model51-0034-FBA

8. EAG

#ad

EAG Front Bumper with D-Rings and Winch Plate Fit for 87-06 Jeep Wrangler TJ YJ

#ad
EAG #ad - D-ring shackles - high strength d-ring mounts are welded on. Construction - manufactured from durable 5/32" steel sheet and 2 3/8" x. 120 wall steel tubing. Fitment - fit for 87-06 Jeep Wrangler TJ YJ. Winches. Easy installation - eag front bumper is engineered to be a direct bolt-on upgrade replacement for your Jeep's original stock bumper reusing the factory mounting points. Two 4. 75 ton d-ring shackles and black isolators included. Winch plate - built-in winch plate for up to 12, 000lbs.
BrandEAG #ad
ManufacturerEAG #ad
Height3 Inches
Length52 Inches
Weight50 Pounds
Width21 Inches
Part NumberJTJFB007

9. ECOTRIC

#ad

Winch Mounting Plate for 1987-2006 Jeep Wrangler YJ TJ LJ On Your Bumper- 12000 lb Capacity

#ad
ECOTRIC #ad - All mounting hardware included. Easy bolt-on installation. Fitment: jeep: 97-06 wrangler tj 4wd, 04-06 wrangler unlimited LJ 4WD, 87-95 Wrangler YJ 4WD. This highly durable mounting plate, made out of heavy steel, accommodates all winches and can be used with Jeep TJ & YJ factory bumpers along with aftermarket tube style bumpers. Main compartment can accommodate up to a 12, 000 lbs winch. Black powder coated for long lasting durability. Crafted from heavy duty 1/4 inches steel. Raised winch plate to accommodate larger bumpers. Allows the winch to be quickly installed and removed.
BrandECOTRIC #ad
ManufacturerECOTRIC #ad
Part NumberET-050
ModelET-050

10. Smittybilt

#ad

Smittybilt SRC Front Stinger Bumper for Jeep TJ/YJ

#ad
Smittybilt #ad - Base plate is 3/16” cold rolled steel. Can be used with various winch plates for TJ model. Fits 1987-06 wrangler TJ/YJ. Integrated D-ring mounts, welded inside and out. 2” dom 120, wall tubing. Deflective angles are designed to protect hood in a roll-over. Reinforced corners and sides. Provides maximum clearance for approach and departure angles.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height29 Inches
Length45 Inches
Weight60.2 Pounds
Width13 Inches
Part Number76521
Model76521
Warranty5-Year limited