Top 10 Tongue Jack Stand – RV Jacks

As an Amazon Associate I earn from qualifying purchases.

1. Camco

#ad

Lightweight and Easy to Store, 44635, 5,000 lb. Rating, Evenly Distributes the Weight of the Tongue, Camco Durable Tongue Jack Stand, Stabilize Your Tongue

#adCamco #ad - Weight rating. Evenly distributes the weight of the tongue. Durable, UV stabilized resin. Eliminates the need for bulky blocks of wood or cinderblocks. Lightweight and easy to store. 5, 000 lb.

Brand	Camco #ad
Manufacturer	Camco #ad
Height	8 Inches
Length	9 Inches
Weight	1.15 Pounds
Width	8 Inches
Part Number	44635
Model	44635

2. Valterra

#ad

Valterra A10-0900 Trailer Tongue Jack Stand, Red

#adValterra #ad - Eliminates the need to tote and store bulky wood blocks and weighs only 2 lbs. Not designed to be used with trailer jacks with wheels or casters. Supports the trailer tongue without the worry of sinking into the asphalt on hot days. Measures 8-5/8" diameter x 8-3/8" high. Holds up to 10, 000 lbs.

Brand	Valterra #ad
Manufacturer	Valterra #ad
Height	1.39 Inches
Length	1.39 Inches
Weight	1.5 Pounds
Width	1.39 Inches
Part Number	A10-0900
Model	A10-0900
Warranty	1 year

3. Andersen Manufacturing

#ad

Andersen Hitches Trailer Jack Block with Magnets, 1 in Pack

#adAndersen Manufacturing #ad - The blocks are stackable for extra height and can even double as seats or step-stools Note: do not stack more than two high. Double use for your money: use them as a seat, or a water bucket to put out your campfire! Recessed pad area is 9-1/8" diameter, a motorcycle stand, recessed post-hole is 2-1/2" diameter;. The trailer jack block is extremely strong and durable -and resists dirt and oil. Eliminates nearly all movement and sway in parked rv's and Trailers Less Stress on Your Trailer. Dimensions: 8" tall, 12" diameter at base, 10" diameter at top 14" tall when double-stacked.

Brand	Andersen Manufacturing #ad
Manufacturer	Andersen Manufacturing #ad
Height	8.7 Inches
Length	12.28 Inches
Width	12.28 Inches
Part Number	3608-M
Model	5841854845

4. Dock N Stow

#ad

Utility Travel Accessories, Stabilizing Leveling Block Stores on Tongue Frame, Dock N Stow Trailer Jack Stand, RV Camper, Secures with a Bungee, GEN 1, Fits Most Jack Foot Plates, Pop Up, Wheel, Boat

#adDock N Stow #ad - If dock n stow does get dirty, heat, water, wipe it clean in seconds. Safety: gen 1 secures to square or rectangle tube frames with an included adjustable flat bungee & anti-slip silicone tape. It has a 5000 lb. No more climbing up into the truck looking for your block of wood, risking injury.

Capacity for any foot or post, round or square and a 2500 lb. Space-saver: gen 1 sits directly on 2, 2. 5 or 3-inch trailer tongue or frame with the included dovetail spacers. Wheel dock capacity. Multi-use: dock n stow gen 1 supports most any trailer tongue jack without damaging the trailer. Durable: gen 1 is extremely durable, engineered and made for the outdoors using high quality ABS plastic which is resistant to UV exposure, mud and most other environmental hazards. For rv's, boating and Most Bumper Pulled Trailers.

Not to be used with C channel or I-beam frames. Drive with it safely attached to your trailer. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need. Added height: dock n stow provides 6 inches of height saving you time trailering or de-trailering, no need to lower your jack to the ground. With the 1/4 inch lip around the top, they are stackable, add another Dock N Stow on top for 12 inches of height.

Brand	Dock N Stow #ad
Manufacturer	Dock N Stow #ad
Height	6.25 Inches
Length	7 Inches
Weight	3.36 Pounds
Width	7 Inches
Part Number	GEN1
Warranty	Dock N Stow products are covered by a one-year limited warranty on material and workmanship. Warranty is non-transferable. Dock N Stow reserves the right to inspect all product claims under warranty. Any alteration of the device voids this warranty. The user assumes all risks for the proper use of this device and for ensuring product suitability for the intended application. This warranty shall not cover any incidental or consequential damages due to the improper use or failure of this device.

5. Reese

#ad

Heavy-Duty Swivel Mount, 6-Inch Wheel, Chrome, REESE Towpower 74410 Trailer Jack

#adReese #ad - Side winding handle with 1:1 gear ratio provides fast operation. Fits tongues 3 inches to 5 inches. Heavy duty swivel mechanism for easy use. 6 inch wheel to move your trailer into position for easy hook-up. Features 1000 pound capacity.

Brand	Reese #ad
Manufacturer	Reese Towpower #ad
Height	7 Inches
Length	24 Inches
Weight	14 Pounds
Width	7 Inches
Part Number	74410
Model	74410

6. Lippert Components

#ad

Lippert 285318 3500LB Power Tongue Jack Black

#adLippert Components #ad - Integrated lighting. Complete with all necessary hardware and pins, installation for the Power Tongue Jack is fast and simple, so you can get to lowering and raising your equipment in no time. No cranking necessary. This jack was built with a tough, textured casing that protects it from getting chipped or scratched by damaging dirt and debris.

Black color matches most RV models. Time-saving. Added protection. Powerfully designed. Increased tube diameter now gives our jack a 3, 500-pound rating. Saves time and energy. Equipped with 4 led lights that shine directly down on the coupler, you can operate the Power Tongue Jack night or day with ease. With a 3, this jack was constructed to do all the heavy lifting, 500-pound lift capacity and 30 amPs of power, so you don’t have to.

Designed with an enhanced rocker switch, you can automatically raise and lower your A-frame trailer with the simple push of a button -- saving you time and energy. Easy installation. Added protection this jack was built with a tough textured casing that protects it from getting chipped or scratched by damaging dirt and debris. Lippert components power Tongue Jack raises and lowers your trailer with the click of a button. Designed so trailer owners don't have to manually crank their traditional sidewinder jacks.

Brand	Lippert Components #ad
Manufacturer	Lippert Components #ad
Height	7.25 Inches
Length	32.75 Inches
Weight	10 Pounds
Width	12.5 Inches
Part Number	285318
Model	285318
Warranty	1 Year

7. Dock N Stow

#ad

Boat, Secures w/a Magnet GEN 2, Utility Travel Accessories, RV Camper, and Wheels, Fits Most Jack Foot Plates, Dock N Stow Trailer Jack Stand, Pop Up, Stabilizing Leveling Block Stores on Tongue Frame

#adDock N Stow #ad - If dock n stow gets dirty, wipe it clean in seconds. Durable: gen 2 has durability built into it, water, engineered and made for the outdoors using high quality ABS plastic, heat, it's resistant to UV exposure, mud and most other environmental hazards.

Space-saver: gen 2 sits directly on 2, 2. 5 or 3-inch trailer tongue or frame with the included dovetail spacers. No more climbing up into the truck for your block of wood, rectangle tube, risking injury. Safety: gen 2 secures to steel square, i beam and channel trailer frames with a powerful on/off switchable magnet. For rv's, boating and Most Bumper Pulled Trailers. With the 1/4 inch lip around the top, add another Dock N Stow on top for 12 inches of height. Stored close to the area of use, you’ll never have to search for a stand again and you'll have more storage space to bring what you need.

Capacity for any foot or post, round or square and a 2500 lb. Wheel dock capacity. Multi-use: dock n stow gen 2 supports most any trailer tongue jack without damaging the trailer. Drive with it safely attached to your trailer. Added height: dock n stow provides 6 inches of height saving you time trailering or de-trailering, they are stackable, no need to lower your jack to the ground.

Brand	Dock N Stow #ad
Manufacturer	Dock N Stow #ad
Height	6.25 Inches
Length	7 Inches
Weight	5.3 Pounds
Width	7 Inches
Part Number	GEN2
Warranty	Dock N Stow products are covered by a one-year limited warranty on material and workmanship. Warranty is non-transferable. Dock N Stow reserves the right to inspect all product claims under warranty. Any alteration of the device voids this warranty. The user assumes all risks for the proper use of this device and for ensuring product suitability for the intended application. This warranty shall not cover any incidental or consequential damages due to the improper use or failure of this device.

8. Andersen Hitches

#ad

Post Jacks, Pad Jacks, 1 Pack, Red 3621, Andersen Hitches EZ-Block Rectangle Jack Block Works with Scissor Jacks

#adAndersen Hitches #ad - Dimensions: 12" x 8. 5" base, 8" x 4. 5" pad rest, 8" tall 14" tall when double-stacked. Rated at 2, 000 lbs single or double stacked. The andersen ez block is an extremely strong and durable jack block that is perfect for all bumper-tow trailers.

It works with scissor jacks, pad jacks, post jacks, and more. The blocks feature a recessed post hole that helps prevent post jacks from slipping. Recessed post-hole is 2-1/2" diameter and each block weighs 3. 1 lbs! fit type: Universal Fit. The blocks are also stackable if you need extra height Note: do not stack more than two high. Finger holes on each side for easy moving. The ez block is designed to resist dirt and oil.

Brand	Andersen Hitches #ad
Manufacturer	Andersen Hitches #ad
Height	1 Inches
Length	1 Inches
Width	1 Inches
Part Number	3621
Model	3621

9. CURT

#ad

CURT 28274 Trailer Jack Foot, Fits 2-Inch Diameter Tube, 8-1/2-In Height, Supports 2,000 lbs

#adCURT #ad - Included pin. Perfect for a wide variety of trailer types, this trailer jack foot plate is rated to support up to 2, 000 pounds tongue weight. Corrosion-resistant. Note: due to the plating process there may be some surface corrosion inside the tube.

It has an overall height of 8-1/2 inches. This trailer support jack foot is constructed from zinc-plated steel for corrosion resistance. Great for use as a trailer jack foot replacement, the versatile mount fits virtually any trailer jack with a 2-inch diameter tube. Reliable strength. It attaches to the trailer jack and allows for increased stability of the trailer tongue when parked or loading.

For immediate installation, this trailer tongue jack foot comes with a safety pin included. The safety pin secures the foot onto the jack and can quickly be removed if needed. Versatile design. Trailer stability. Add stability to your trailer with this simple but sturdy trailer jack foot.

Brand	CURT #ad
Manufacturer	Curt Manufacturing #ad
Height	2 Inches
Length	7 Inches
Weight	2 Pounds
Width	2 Inches
Part Number	28274
Model	28274
Warranty	Limited Lifetime Warranty (One-Year Finish, One-Year Parts)

10. Pro Series

#ad

Pro Series EJ10000101 1000 Lbs. Capacity Swivel Trailer Tongue Jack

#adPro Series #ad - Clear zinc finish for corrosion protection. Bolt-on swivel tongue Jack, 1000 lbs. Capacity. Hardware included to mount up to a 3" x 5" trailer frame. Sturdy 6" poly wheel, 3/8" swivel pull pin. Limited 1 Year Warranty.

Brand	Pro Series #ad
Manufacturer	Pro Series #ad
Height	0 Inches
Length	0 Inches
Weight	8.82 Pounds
Width	0 Inches
Part Number	EJ10000101
Model	EJ10000101
Warranty	limited warranty