Top 10 YJ Bumper Combo – Automotive Bumpers

As an Amazon Associate I earn from qualifying purchases.

1. oEdRo


Textured Black, OEDRO Off Road Rear Bumper Combo Compatible with 1987-2006 Jeep Wrangler TJ & YJ & LJ, Full Width Back Bumper with Hitch Receiver & 2 x D-Rings

oEdRo #ad - Tough welded made with 5/32" steelsheets that bolsters strength of the weight-bearing region. Installation instructions included. Durable & long-lasting product also powder-coated with black textured finish and enhanced by pre-treatment to provide extreme resistance against rust and wear.

Perfect fitment oedro rear bumper combo is compatible with 1987-2006 Jeep Wrangler TJ & YJ & LJ 2-door all models No Drilling Required. Equipped with D-ring mounts welded inside and out for increased strength. Bolt-on installation direct installation with no cutting or drilling required for this back bumper.

Comes with a 1-year warranty against manufacturing defects and backed by our renowned customer service. No hassle warranty package includes 1 rear bumper set, 2 x D-rings, 1 set of screws & installation instructions. It not only makes your car look tougher but also protects it in collisions.
BrandoEdRo #ad
ManufacturerOEDRO #ad
Height9.84 Inches
Length64.17 Inches
Weight71 Pounds
Width14.37 Inches
Part NumberOROETEWB-0020
WarrantyLimited lifetime warranty

2. Tidal Automotive


Tidal Front Bumper and Rear Bumper Combo Fit for 87-06 Wrangler TJ YJ

Tidal Automotive #ad - Construction - manufactured from 5/32" cold rolled steel sheet. Fitment - 87-06 wrangler TJ YJ. Winches. D-ring shackles - the d-ring mounts are welded on both inside and outside for extra strength. Built-in winch plate for up to 12, 000lbs. Two 4. 75 ton capacity D-ring shackles are included. Front bumper - welded hoop protects the front of the Wrangler TJ. Exactly same as the picture. Rear bumper - 2" standard hitch receiver included. Textured black powder coat for corrosion protection and durability. Two tabs on pre-runner hoop for extra off-road lights.
BrandTidal Automotive #ad
ManufacturerTidal Auto #ad
Weight135.7 Pounds
Part NumberJTJFB002+JTJRB004



LED Lights Heavy Duty Textured Black, LEDKINGDOMUS Rock Crawler Front Bumper Compatible with 87-06 Jeep Wrangler YJ and TJ with Winch Plate

LEDKINGDOMUS #ad - Built-in winch plate has weight capacity ofup to 12, 000 lbs winch not included. Corrosion resistance FinishE-coat and premium textured-black powder coating grant long-lasting corrosion resistance.

Total capacity is 9000 lbs. Simple installation with no drilling or cutting required. Please note: you may need a separate set of wiring harness. These led accents also help you "see and be seen" even on the darkest trails for additional safety. Offers a great place to mount a winch and efficient vehicle recovery. Perfect fitmentthe bumper compatible with 1987-2006 Jeep Wrangler YJ and TJ All models.

Led accent lightingthe hd bumper has 2 built-in led lights around the d-ring mounts for a stylish look. Shackle mount and d-ringstwo solid d-ring shackle mounts are welded onto the front bumper for additional strength. Heavy duty constructionthe bumpers are manufactured with durable 5/32" steel sheet and 2"X0120" steel tubing. With the two 4. 75 ton d-Rings.
ManufacturerLEDKINGDOMUS #ad
Height11.62 Inches
Length54.92 Inches
Width10.48 Inches
Part NumberLKYJ0004
ModelRock Crawler Front Bumper
Warranty2 year manufacturer

4. Smittybilt


Smittybilt 76740D SRC Classic Front Bumper with D-Ring Mounts and Shackles for 1976-2006 Jeep Wrangler TJ/YJ/LJ

Smittybilt #ad - Classic rock crawler design for Jeep TJ, YJ and LJ provides front end protection. Requires no drilling or modifications - direct bolt-on installation. Textured black powder coated finish. Heavy duty 3/16" cold rolled steel. Bumper also available without D-ring mounts 76740 .
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height5 Inches
Length56 Inches
Weight33 Pounds
Width6 Inches
Part Number76740D

5. Hooke Road


Hooke Road Wrangler TJ Bumper Combo Front + Rear Bumpers with D-Rings & Receiver Hitches Compatible with Jeep Wrangler TJ 1997-2006

Hooke Road #ad - Hooke road front bumper + rear bumper Kit Compatible with Jeep Wrangler TJ 1997-2006. 2 year hooke road manufacturer's Warranty & Life time customer support. Winch. Rear bumper:2" standard hitch receiver;High Strength D-Ring Mounts w/ D-Rings Included. Front bumper:d-rings & 2x led accent lights included;Built-in winch plate for up to 12, 000lb. Heavy duty 3/16" steel construction;Two Stage Textured Black Powder Coat Finish.
BrandHooke Road #ad
ManufacturerHooke Road #ad
Part NumberZ.BXG.1009+1012

6. Paramount Automotive


Paramount Automotive Restyling 51-0014 Black Rear Heavy Duty Rock Crawler Bumper Jeep Wrangler YJ/TJ

Paramount Automotive #ad - Manufactured from durable 5/32" steel and 2"x. 120" tubing. Built in winch plate will mount up to 12000 lbs. Comes in satin black finish. D-ring mounts welded inside and out for increased strength. Winch. D-rings included - 4. 75 ton capacity.
BrandParamount Automotive #ad
ManufacturerParamount Restyling #ad
Height10 Inches
Length60 Inches
Weight6 Pounds
Width13 Inches
Part Number51-0014
Warranty1 Year

7. EAG


EAG Front Bumper with D-Rings and Winch Plate Fit for 87-06 Wrangler TJ YJ

EAG #ad - Winches. Construction - manufactured from durable 5/32" steel sheet and 2 3/8" x. 120 wall steel tubing. Two 4. 75 ton d-ring shackles and black isolators included. D-ring shackles - high strength d-ring mounts are welded on. Easy installation - eag front bumper is engineered to be a direct bolt-on upgrade replacement for your wrangler original stock bumper reusing the factory mounting points. Winch plate - built-in winch plate for up to 12, 000lbs. Fitment - fit for 87-06 Wrangler TJ YJ.
BrandEAG #ad
ManufacturerEAG #ad
Height13.78 Inches
Length52.36 Inches
Weight50 Pounds
Width20.47 Inches
Part NumberJTJFB007



Front Bumper Winch Plate D-Ring Rock Crawler Black For 1986-2006 Jeep Wrangler TJ YJ

ECOTRIC #ad - For 2007-2019 front bumper, you can search for the ASIN B07M5GFG5V. For 1987-2006 rear bumper, you can search for the ASIN B07MW2Q8TK. Built in winch plate for mounting winch which is more than 9, 000Lbs.

Built in safety catch for those uneven parking situations. 100% brand new in stock. Necessary hardware and installation instructions are included. Fits up to 37" tire. Steel construction 2" X 120" wall. Overall dimension: 56"L x 12"W x 15"H. One-piece fully welded design. Two light tabs on the hoop for mounting extra lights. Front bumper size:56"width x 7. 5" depth. For 2007-2018 rear bumper, you can search for the ASIN B07LF3QHKM. Heavy duty steel construction with powder coat finish, textured black powder coat for corrosion protection and durability. Winch plate:24 X 7.
BrandECOTRIC #ad
ManufacturerECOTRIC #ad
Part NumberCA-110

9. Smittybilt


Smittybilt SRC Front Stinger Bumper for Jeep TJ /YJ

Smittybilt #ad - Fits 1987-06 wrangler TJ/YJ. Reinforced corners and sides. Deflective angles are designed to protect hood in a roll-over. Integrated D-ring mounts, welded inside and out. 2” dom 120, wall tubing. Base plate is 3/16” cold rolled steel. Can be used with various winch plates for TJ model. Provides maximum clearance for approach and departure angles.
BrandSmittybilt #ad
ManufacturerSmittybilt #ad
Height29 Inches
Length45 Inches
Weight60.2 Pounds
Width13 Inches
Part Number76521
Warranty5-Year limited

10. oEdRo


Rock Crawler with Hitch Receiver, OEDRO Rear Bumper Compatible for 1987-2006 Jeep Wrangler TJ & LJ & YJ, LED Lights & D-Rings Full Width Off Road

oEdRo #ad - Extremely bright- built-in high power 40w 2pcs flood beam fog lights. Perfect fitment -fits for 1987-2006 jeep wrangler tj lj yj. Bolts directly on to factory holes, no additional drilling or cutting required.

Never rusts- the rear bumper has a high quality textured black powder coat and along with our advanced laser welding technology, prevents rust from occurring. If you have any questions or problems, 2 x Led Lights, please contact us. They brighten up the road, perfect for any night time adventure. Durable materials-this back bumper is made of durable 5/32" steel sheets and 2"X0120" steel tubing.

It not only makes your car look tougher but it also protects your car in collisions. The packaging is specially designed with 7-layers of cardboard to avoid your package being damaged during transportation. High accuracy laser measuring and cutting makes sure that the bumper has a correct 360° fit. What you get- rear bumper, 1 set of screws, & 1 x instruction manual.
BrandoEdRo #ad
ManufacturerOEDRO #ad
Height8.86 Inches
Length62.99 Inches
Width14.96 Inches
Part NumberYO0301R010
WarrantyLimited lifetime warranty