Top 9 Gear Puller Tool – Jaw Pullers

As an Amazon Associate I earn from qualifying purchases.

1. ABN

#ad

And Flywheel, Pulley, and 6in Removal Tool Kit for Slide Gears, ABN 3-Jaw Gear Puller Set – 3in, 4in

#ad
ABN #ad - Works with your tools: tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal. Multi-position design: universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths.

Built to last: forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation.

Damage-free removal: manual bearing pullers remove slide gears, bushings, bearings, pulleys, and flywheels without causing damage to your application. Durable 3 jaw puller set: use the abn 3, 4, and 6-inch small gear puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears.
BrandABN #ad
ManufacturerABN #ad
Height9.75 Inches
Length5.2 Inches
Weight6.55 Pounds
Width4.9 Inches
Part Number0302
Model13

2. DURATECH

#ad

Removal Tool for Gears, DURATECH 8-Inch 3-Jaw Gear Puller, Pulleys, Bearings and Flywheels

#ad
DURATECH #ad - Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Perfect for you to smoothly and safely slide gear, and flywheel off the shaft.

No need to assemble yourself is the advantage of DURATECH. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach. Drive screw is covered by black phosphating, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. Make it deal for pulling work in confined areas.

Drop-forged cr-v steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, sprocket puller, bearing puller, or spanner as a gear puller, pulley puller, ratchet, flywheel puller and more. Achieve more with its adjustable and reversible jaws. Jaw spread: 8in, jaw reach: 9-1/16in, pulley, bearing, puller: 12T. Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside.
BrandDURATECH #ad
ManufacturerLONGYOU YIYANG IMPORT AND EXPORT CO.,LTD #ad
Part NumberDT3JGP08

3. Mofeez

#ad

Mofeez 3" 4" 6" inch 3-Jaw Gear Puller – Gear Removal Tool for Slide Gears, and Flywheel 3pc Set, Pulley

#ad
Mofeez #ad - 3 or 6 position design: the universal and reversible jaws offer versatile inside or outside grip along with short or long reach; The 3-inch and 4-inch gear puller has 3 positions and the 6-inch gear pullers have 6 positions.

Damage-free removal: this mofeez 3" 4" 6" inch 3-jaw gear Puller – Gear Removal Tool for Slide Gears, Pulley, and Flywheel makes removal simple and damage-free. Package contents: included is a 3-inch gear puller with a 4. 5-inch jaw spread and 1. 5-inch jaw reach, 4-inch gear puller with a 6. 25-inch jaw spread and 2. 5-inch jaw reach, and a 6-inch gear puller with a 8.

75-inch jaw spread and 4. 75-inch jaw reach. Various applications: Removes slide gears, pulleys, and flywheels off of a shaft without damage to your application. Built to last: constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress.
BrandMofeez #ad
ManufacturerMofeez #ad
Weight5.86 Pounds
Part Number99MF18006
Model13

4. Arcan

#ad

Arcan Hardened 4-Inch Gear Puller with Reversible Jaws AS4GP

#ad
Arcan #ad - 7". 5". Heat treated chrome vanadium steel- added strength that lasts longer than standard hardened steel gear pullers. Reversible jaws: 8 adjustable positions that allow for inside and outside grip. Jaw spread: 6. Jaw reach: 2. Chrome finish: Easy to clean and reduces oil and grease build up. Damage free removal- removes slide gears, pulleys, and flywheels off of a shaft without damaging your application.
BrandArcan #ad
ManufacturerArcan #ad
Height5 Inches
Length5 Inches
Width5 Inches
Part NumberAS4GP
ModelAS4GP
Warranty1 Year

5. Posi Lock

#ad

2 Ton Capacity 3 Jaw Puller, Posi Lock 103 3" Reach, 0.25", 4.5" Spread

#ad
Posi Lock #ad - 2-ton pulling capacity, 3" 76. 2mm reach and a spread range of 025 to 4. 25 inches 6. 4 to 114. 3 mm for increased pulling leverage. Tapered jaws for better access in tight spaces. Manual puller with three jaws for extraction of most shaft-fitted parts, wheels, gears, including bearings, bushings, and pulleys. Three-jaw construction ensures equal load distribution, secure hold, and concentric pulling action. Investment cast steel alloy jaws for strength and durability.
BrandPosi Lock #ad
ManufacturerPosi Lock Puller, Inc #ad
Height3.3 Inches
Length8.8 Inches
Weight1 Pounds
Width3.4 Inches
Part Number103
Model103

6. TAO+

#ad

6 Inch Single Hook Two Claws Puller Separate Lifting Device

#ad
TAO+ #ad - The reasonable design of the pulling claw makes it not easy to fall off when applying force. The product is forged from chrome vanadium steel, durable, rust-proof and non-slip. Ultra-thin claw, with elastic metal resistance, ultra-high strength, not easy to pull bad, easy installation. The tip of the ejector pin is a heat-treated rotating head that does not injure other parts and is durable and labor-saving. Specification:pulling diameter: 95mm, claw length: 140mm, bracket Length: 159mm, Screw Length: 165mm, screw diameter top: 14mm, Screw Diameter bottom: 13mm, Claw Thickness: 3-5mm.
BrandTAO+ #ad
ManufacturerTAO+ #ad
Part NumberSB-12222
ModelSB-12222

7. Orion Motor Tech

#ad

Orion Motor Tech 3" 4" 6" 3-Jaw Gear Puller Set for Removal of Bearings Pulleys Flywheels

#ad
Orion Motor Tech #ad - Universal removal tool: this 3-jaw removal tool set works with your wrench, sprocket puller, pulley puller, flywheel puller and more, ratchet, bearing puller, or spanner as a gear puller, removing even rusted parts easily and—thanks to its even distribution of force—without damage.

Satisfaction guaranteed: along with this gear and bearing removal tool kit's durable material and careful engineering, you can rest easy knowing that these gear pullers are backed by OMT's warranty and friendly customer service. Better together: this professional or home tool kit includes three puller sizes to cover most applications: a 3 inch gear puller with a 2. 3" reach and 3" max. Spread; a 4 inch gear puller with a 3" reach and 4" max.

Versatile reversible design: each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside as needed. Spread. Spread; and a 6 inch gear puller with a 4. 7" reach and 6" max. The jaws are galvanized and the central screw coated with black oxide to provide superior corrosion resistance and long service life. 45# carbon steel: all parts are made with premium heat-treated 45# carbon steel for maximum strength.
BrandOrion Motor Tech #ad
ManufacturerOrion Motor Tech #ad
Part NumberS003-00

8. Keenso

#ad

Two Jaw Pilot Bearing Gear Puller, Bearing Gear Remover Tool Carbon Steel Adjustable Pump Pulley Remover Hand Tool Removal Kit Straight Type3inch

#ad
Keenso #ad - Size: 2. 5" 35 * 45 mm / 22" * 35"; 8" 70 * 120 mm / 15" * 26"; 4" 40 * 80 mm / 14" * 18"; 3" 38 * 65 mm / 16" * 31"; 6" 55 * 90 mm / 28" * 47". If for any reason you are not completely satisfied with any of our products, just contact us directly so we can help with whatever is needed for you.

Adjustable & fit for different gears and bearingsThe puller can be bilateral rotation, enable stretching size and working space. Two jaw with adjustable clamping depth, fit for different size gears and bearings. Easy to usecomes with hexagonal screw and thread for fastening, non-silp and high strength. Adjust screw design, flexible and convenient to repaired different size gears and bearing. It is easy to use.

Widely application to be usedthese two Jaw Gear Pullers are ideal for automotive flywheel, bicycle wheel, motorcycle wheel, pump bearing generator bearing, machine bearing etc. Made of high quality carbon steel materialthese Two Jaw Pilot Bearing Gear Pullers are made of carbon steel, the point of the mandrill through a special heat treatment process, more solid and durable. Jaw bearing gear puller & service guaranteedmaterial: carbon steel.
BrandKeenso #ad
ManufacturerKeenso #ad
Height0 Inches
Length0 Inches
Weight0.62 Pounds
Width0 Inches
Part NumberKeensom0sr4h7ocw-02
Model.

9. ABN

#ad

And Flywheel, ABN 6in 2-Jaw Gear Puller – Removal Tool for Gears, Pulley

#ad
ABN #ad - Damage-free removal: the abn 6" inch 2-jaw gear Puller – Removal Tool for Gears, Pulley, and Flywheel makes removal simple and damage-free.

8-position design: the universal and reversible jaws offer versatile inside or outside grip along with short, long, standard, or extra-long reach. Built to last: constructed from forged and hardened steel for strength and longevity; Steel drive screw is cold-rolled and acme-threaded to give you smooth performance even under high stress. Specifications: 8. 75-inch 22. 2cm jaw spread; 4. 75-inch 12. 1cm jaw reach. Get into tight areas: removes gears, pulleys, and flywheels off of a shaft in hard-to-reach spots without damage to your application.
BrandABN #ad
ManufacturerABN #ad
Height1.8 Inches
Length9.75 Inches
Weight1.23 Pounds
Width6.9 Inches
Part Number9640