Mono Block Amplifier, MTX TNP212D2 12-Inch 400-Watt RMS Dual Loaded 1200-Watt Car Subwoofer Enclosure Audio with Sub Box, and 8 Gauge Amplifier Amp Complete Wiring Installation Kit#adMTX #ad - Amplifier installation kit: features a 20 foot 8 gauge red power cable, 16 feet of 18 gauge blue turn on wire, 3, 20, a 5/16 inch ring terminal, 30 feet of speaker wire, a Number 10 ring terminal, a 20 foot high performance RCA interconnect, 3 feet of 8 gauge black ground cable, rubber grommets, 4 inch wire ties, competition high quality fuse holder, and a 1/4 inch ring terminal.
Add bass: add some bass to your car with the mtx 2 x 12 subwoofer Party Pack; The enclosure designs delivers bass that exceeds expectation; Each subwoofer can handle 200-watts RMS power 400-watts RMS for entire enclosure.
Specifications: subwoofer enclosure: max power: 1200 watt; rms power: 600 watt; single 4 ohm voice coils per sub pre wired down to 2 ohm load; Frequency response : 37 150Hz; Dimensions HxWxD : 13. 875 x 29. 625 x 13. 875 inches. High quaility: enclosure is constructed with extra strength 5/8 inch medium density fiberboard to ensure the enclosure contains low frequency sound waves generated by subwoofer without problem.
MTX Audio TNP212D2 Terminator Power Pack Subwoofer System, Set of 2,BLACK#adMTX #ad - Enclosure boasts 5/8" mdF construction, aviation-grade black carpet, and embroidered Terminator logo. Variable low- and high-pass filters offer 40Hz–400Hz range for sound shaping.
|Warranty||1 Year Manufacturer's Warranty|
And 8 Gauge Amplifier Amp Complete Wiring Installation Kit, Planet 1500W Mono Amp, Mono Block Amplifier, MTX TNP212D2 12" 400W RMS Dual Loaded 1200W Car Subwoofer Enclosure Audio with Sub Box#adMTX #ad - Installation kit specifications: 20-foot 8 gauge red power cable; 1/4-inch gold plated ring terminal; 3-foot 8 gauge black ground cable; Number 10 gold plated ring terminal; 16-foot 18 gauge blue turn on wire; 20-foot high performance RCA interconnect; 3 Rubber grommets; 30-foot speaker wire; 5/16-inch Gold plated ring terminal; 6-foot split loom tubing; 20 4-inch wire ties.
Maximum sound quality: the mtx terminator series subwoofer system includes 2 subs, sub enclosure and a car amp; With 1200 max power, it gives off super deep bass sounds, while keeping maximum sound quality.
69 x 13. 5 x 11. 13 inches. Amplifier specifications: rms power: 700 watt x 1 channel @ 4 ohm, 2500 watt x 1 channel @ 2 ohm max power, 1100 watt x 1 channel @ 2 ohm, 1500 watt max power; switchable input sensitivity: 100mV 2V or 2V 8V; Switchable phase shift; Selectable bass boost 0 to +18dB; Signa to noise ratio: 102dB; Frequency response: 20 20KHz; Dimensions H x W x L: 2.19 x 10 x 10 inches; Remote control included.
MTX Road Thunder RT8PT 8” 240 Watt Powered Vented/Ported Bass Tube+Amp Wire Kit#adMTX #ad - 240 watt mAX. 120 watt rMS. New mtx rt8pt 8" single Amplified Tube Subwoofer. Built In Amplifier. Subwoofer:**.
MTX Magnum 10" 400W RMS Dual Car Loaded Subwoofer Sub Woofer+Box+Amp Kit Package#adMTX #ad - Brand new mtx dual 10" 800 watt car subwoofer Enclosure with Amplifier and Amp Kit. 200 watt rMS. Loaded subwoofer:**. Subwoofer**:. 800 watt mAX.
Audiopipe APSB-1299PP Dual 12 Inch Car Audio Subwoofer Speakers and Sealed Enclosure, and Wire Installation Kit, 2 Channel 500 Watt Amplifier#adAudiopipe #ad - Sealed enclosure: sealed mdf enclosure comes preloaded with 2 12-inch subwoofers APSE-120PC; Dimensions L x W x H: 27. 4 x 15. 4 x 12. 91 inches. Device protection: amplifier is designed with short-circuit protection, DC offset, and thermal overload.
Wiring kit: amp wire kit bms-750 comes 17 feet of red 10 awg power wire, 3 feet of split loom tubing, 3 feet of silver 10 AWG ground wire, 25 feet of 16 AWG speaker wire, 40A AGU fuse, fuse holder, 10 assorted cable ties.
7. Sound Storm Laboratories#ad
1200 Watts Max Power, Great For Vehicles Needing Bass But Have Limited Space, Low Profile, Remote Subwoofer Control, 10 Inch Subwoofer, Sound Storm Laboratories LOPRO10 Amplified Car Subwoofer#adSound Storm Laboratories #ad - It will be used to connect the lopRO10 to your factory radio or an aftermarket radio that does not have low-level RCA inputs. Low level inputs: line level inputs, also known as rca inputs or low-level inputs, use RCA interconnect cables to link the LOPRO10 with the source unit.
75” x 3”. You will use the Low-pass filter to primarily keep high notes out of your subwoofers. Variable bass boost: variable bass boost allows you to adjust the low bass within the boost Range to just the way you like it. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles.
We strongly encourage Professional installation of this product to ensure proper and safe functionality. Most aftermarket radios have multiple pairs of RCA outputs that can connect to multiple amplifiers. High level inputs: speaker level inputs are commonly referred to as high-level inputs. Dimensions: 15” x 9.
|Brand||Sound Storm Laboratories #ad|
|Manufacturer||Sound Storm Laboratories #ad|
|Warranty||3 Year Platinum Online Dealer Warranty|
Rockville SS8P 400w 8" Slim Under-Seat Active Powered Car/Truck Subwoofer Sub#adRockville #ad - Peak power handling: 400 watts. Dimensions l x w x h: 11. 4" x 8. 3" x 2. 8" inches. Phase switch: 0° or 180°. Subwoofer level remote control. Soft delayed Remote Turn-On.
Rms power: 100 Watts. Pwm mosfet power supply. Built in subsonic Filter @ 20Hz. Heavy duty Mounting Feet. Overload protection circuit. Signal to noise ratio: >90db. Enclosure is made out of cast aluminum which stays cool at all times.
ALPHASONIK APP122 Complete 1500 Watts Dual 12" Subwoofers Car Bass Package with Amplifier and Installation Kit Included, 2 Sub Woofers with Grills in Custom Ported Box Loaded Enclosure, Black#adALPHASONIK #ad - When protection mode is enabled, short circuit, the LED indicator on the side panel will illuminate. Our professional installation 8 awg amp kit provides a 17’ power cable, 17’ RCA cable, 17’ remote turn on wire, 3’ ground cable, ATC fuse, and accessory wire-ties.
The amplifiers built-in protection circuitry protects your system from input overload, and high temperatures. The ported enclosure is constructed of mdf medium-density fiberboard with black carpet measured at 13.
2%, powder coated chassis, and a bass boost control to connect near the driver for optimum loudness control.
|Part Number||TNE212D + R1100M + AKS8|