Wireless Remote Control – 12,000 lbs. Capacity – LD12-ELITE Electric Heavy Duty Recovery Winch – by Driver Recovery Products

#ad
#ad
Driver Recovery Products LD12-ELITE #ad - Industry standard 10" x 4-1/2" mounting bolt pattern. Wireless remote control. Included is the ld12-elite winch, premium roller fairlead, 72" power wire 2 gauge red, 87' of pre-wound 3/8" cable, wired controller 12' cord, owner's manual, 3/8" clevis slip hook with latch grade 70, mounting hardware, wireless controller with battery, hook safety pull strap, pre-attached, and 72" ground wire 2 gauge black.

It measures 21-1/4" x 6-1/4" x 9-7/8" high, and weighs 90 pounds. Premium 87 ft. An automatic breaking system locks the rope in place to hold the load when power is not applied. Abrasion-resistant wire rope on 2 1/2 in. An upgraded direct-current 12-volt DC motor delivers maximum torque. The rope is extremely durable, abrasion-resistant 3/8" aircraft-quality wire 87' wrapped around a 2-1/2" diameter x 8-13/16" long drum.

Wireless Remote Control - 12,000 lbs. Capacity - LD12-ELITE Electric Heavy Duty Recovery Winch - by Driver Recovery Products #ad - High, and weighs 90 pounds. Premium electric winch from Driver Recovery Products; rated for single-line pull up to 12, 000 pounds. Diameter x 8 13/16 in. When engaged, the drum is secured to the motor using a sliding ring gear clutch. A wireless controller with battery is also included with a 75' range. When disengaged, the drum will freespool, meaning the rope can be pulled without the motor.

More information about Driver Recovery Products LD12-ELITE #ad

Driver Recovery Products Waterproof Soft Winch Dust Cover - fits Model LD12-ELITE and X12-TITANIUM and Other winches

#ad
#ad
Driver Recovery Products COVER-U #ad - Protects winch from the elements. Stretched to its full size, 9-1/2" tall, the cover measures about 21" wide, and 6-1/2" deep. It conceals the winch to protect it from the elements, and is made of water-resistant nylon with a sewn-in elastic band around the edges so it fits securely around the winch. Made of water-resistant nylon.

Driver Recovery Products Waterproof Soft Winch Dust Cover - fits Model LD12-ELITE and X12-TITANIUM and Other winches #ad - Tall x 6-1/2 in. Designed for use with the driver recovery products ld12-elite and x12-titaniuM winch, this soft winch cover conforms to many shapes and can be used with a variety of winches in the 8, 000 to 17, 000 pound capacity range. Wide x 9-1/2 in. Measures 21 in. Sewn-in elastic band around the edges for secure fit.

More information about Driver Recovery Products COVER-U #ad


Similar products



Driver Recovery Products Bumper Hitch Receiver Winch Mount Mounting Plate

#ad
#ad
Driver Recovery Products FBA_W-MOUNT-3 #ad - Tall x 6-1/2 in. Standard 10" x 4-1/2" winch mount pattern. Two removable side guards protect your winch motor and double as handles, allowing for convenient winch removal/installation. Sewn-in elastic band around the edges for secure fit. Made of water-resistant nylon. Mounting channel is drilled with two bolt patterns allowing for custom mounting applications and compatibility with most every winch brand; a standard 10" x 4-1/2" pattern, and a 6-1/2" x 4-1/2" pattern.

Driver Recovery Products Bumper Hitch Receiver Winch Mount Mounting Plate #ad - Wide x 9-1/2 in. Protects winch from the elements. Made of 3/16" high strength steel. Super-duty construction; fabricated from a single piece of ultra-high tensile strength, 3/16" steel plate. Deep. Pack of mounting hardware included. Distance between side guards when installed: 25-1/2". Standard 10" on center fairlead bolt pattern.

Handle length: 7-1/8". Measures 21 in. The front of the mount is pre-drilled for a standard 10" hawse or roller fairlead mounting holes are 10" on center and mouth opening is 8-13/16" x 1-1/4".

More information about Driver Recovery Products FBA_W-MOUNT-3 #ad


Similar products



by Driver Recovery Products - fits model LD17-PRO and many other large winches - Waterproof Soft Winch Dust Cover

#ad
#ad
Driver Recovery Products COVER-17P #ad - Protects winch from the elements. Deep. Standard 10" x 4-1/2" winch mount pattern. Deep. Made of water-resistant nylon. Stretched to its full size, the cover measures about 21" wide, 10-1/2" tall and 8" deep. Wide x 10-1/2 in. Tall x 8 in. Sewn-in elastic band around the edges for secure fit. Measures 21 in. Standard 10" on center fairlead bolt pattern.

by Driver Recovery Products - fits model LD17-PRO and many other large winches - Waterproof Soft Winch Dust Cover #ad - Made of 3/16" high strength steel. Ideal for 8000 lbs to 13, 000 lbs winches. Made of water-resistant nylon. Tall x 6-1/2 in. Wide x 9-1/2 in. Designed for use with the driver recovery products ld12-elite and x12-titanium winch, this soft winch cover conforms to many shapes and can be used with a variety of winches in the 12, 000 to 17, 000 pound capacity range.

Protects winch from the elements. Anti-rust powder coat finish. Sewn-in elastic band around the edges for secure fit. It conceals the winch to protect it from the elements, and is made of water-resistant nylon with a sewn-in elastic band around the edges so it fits securely around the winch. Measures 21 in.

More information about Driver Recovery Products COVER-17P #ad


Similar products



Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer

#ad
#ad
Driver Recovery Products FBA_QC-1 #ad - Ideal for 8000 lbs to 13, 000 lbs winches. The true rated capacity is 175 amps, although some dealers quote higher numbers for similar or even inferior connectors. The pins can then be inserted into the connector housing and lock in place. Sewn-in elastic band around the edges for secure fit. Measures 21 in. Measures 21 in.

Battery Quick Connect Disconnect Electrical Plug 2-4 Gauge 175 Amps for Recovery Winch or Trailer #ad - The set is easy to use; just insert the wires into the terminal pins, crimp or solder. Wide x 10-1/2 in. Voltage: designed for low-voltage 12-36 volts DC use. Protects winch from the elements. The set is compatible with any winch, but the ends may not match the connectors included with other brands. Wide x 9-1/2 in.

Made of water-resistant nylon. Gauge: accepts 2-4 gauge wire. Protects winch from the elements. Deep. Tall x 8 in. Standard 10" on center fairlead bolt pattern. Universal: allows quick connect and disconnect for winches or other electrical devices.

More information about Driver Recovery Products FBA_QC-1 #ad


Similar products



2 Gauge 32 ft. Hi-Amp Universal Quick-Connect Wiring Kit for Trailer Mounted Winch

#ad
#ad
PolePalUSA #ad - Universal: allows quick connect and disconnect for winches or other electrical devices. Standard 10" x 4-1/2" winch mount pattern. Also includes rubber dust cover red to winch positive, black to winch negative. Includes rubber dust cover red to battery positive, black to battery negative. Measures 21 in. Current rating: for high-current use; true rated capacity 175 amps.

Includes rubber dust cover red to battery positive, black to battery negative. 6 foot 2 gauge winch side quick disconnect cable, including high contact 3/8 eye end lugs. Measures 21 in. Sewn-in elastic band around the edges for secure fit. This 32 foot kit includes: 1 - 24 foot 2 gauge truck side quick disconnect cable, including solid contact 3/8 eye end lugs with extra hold.

2 Gauge 32 ft. Hi-Amp Universal Quick-Connect Wiring Kit for Trailer Mounted Winch #ad - Kits are made with flexible, High Power 2 gauge ultra-flex cable with a high quality oil / fuel resistant ultra-flex coating. We can build a kit to your exact specs within 32 feet at no additional cost. Tall x 6-1/2 in. Ideal for 8000 lbs to 13, 000 lbs winches. All sizes are approximate. Just be sure to ask at checkout.

More information about PolePalUSA #ad


Similar products



HYCLAT 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer

#ad
#ad
HYCLAT CECOMINOD038518 #ad - Includes rubber dust cover red to battery positive, black to battery negative. 6 foot 2 gauge winch side quick disconnect cable, including high contact 3/8 eye end lugs. In the kit, a couple of boot caps are included to protect this quick connect and disconnect kist from the dust. Protects winch from the elements.

Insert the wires into the terminal pins, then solder or crimp them. Made of water-resistant nylon. Gauge: accepts 2-4 gauge wire. The terminal pins are made of red copper coated by silver, which has a strong electrical conductivity and can reduce the resitance to make the current and voltage stable. Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices.

HYCLAT 2-4 Gauge Battery Quick Connect/Disconnect Wire Harness Plug Connector Recovery Winch Trailer #ad - Anti-rust powder coat finish. Very easy to install:. Current rating: for high-current use; true rated capacity 175 amps. Measures 21 in. If there is any question, please feel free to contact with us. Package:2 connector ends, 4 terminal pins, and 2 rubber boot caps Protects winch from the elements. This safety quick connect/disconnect connector kits are widely applied in various field.

More information about HYCLAT CECOMINOD038518 #ad


Similar products



LED Light Bar LEDKINGDOMUS 4X 27W 4" LED Light Pod Flood Round Work Light Offroad Light Led Fog Light Truck Light Driving Light Boat Lighting for Truck Pickup SUV ATV UTV,2 Years Warranty

#ad
#ad
LEDKINGDOMUS 4-xB027-12 #ad - That's a total of 18W with a 6, 000k color temperature. Valid irradiation distance longer than normal bulb 4. Gauge: accepts 2-4 gauge wire. Deep. Made of 3/16" high strength steel. It extends the lifespan of the light bar beyond 50, our LED light pod uses 1070 aluminum alloy as the casing which can has best heat dissipation and best seal ability for the heat sink.

LED Light Bar LEDKINGDOMUS 4X 27W 4" LED Light Pod Flood Round Work Light Offroad Light Led Fog Light Truck Light Driving Light Boat Lighting for Truck Pickup SUV ATV UTV,2 Years Warranty #ad - Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1". Sewn-in elastic band around the edges for secure fit. This makes changing the direction of the light beam easier. This light bar will extend your field of vision, giving you a better driving experience.

High performance: withstands harsh environments thanks to the die-cast aluminum housing which provides strength and durability. Specification: 1. Led power: 27w9pcs*3w high Intensity LEDs 2. Ip rating: iP67 3. Operating voltage: 10V-30V DC 4. Light beam: Flood 5. Color temperature: 6000KWhite 6.

More information about LEDKINGDOMUS 4-xB027-12 #ad


Similar products



3", 8' Tree Saver, Winch Strap, Tow Strap 30,000 Pound Capacity

#ad
#ad
TGL-Global 3-8TS #ad - Our 4 inch round led pods have a 50, dust-proof, 000 hour life span and are IP67 rated waterproof, quake-proof, anti-corrosion for harsh environment. Excellent heat dissipation: in order to get the best heat dissipation, makes it dissipate heat faster and more effectively. Ce, tuv certified tow strap at or above the listed limits.

If there is any question, please feel free to contact with us. Brighter your night: 4 inch 27w round led light bar is equipped with 9, three watt high intensity LEDs. Sewn-in elastic band around the edges for secure fit. Perfect to use with a winch for vehicle recovery while protecting trees from damage or other uses.

3", 8' Tree Saver, Winch Strap, Tow Strap 30,000 Pound Capacity #ad - Package include: 2x polycarbonate cover; 2x hard rubber boot caps; 4x terminal pins. An upgraded PC lens surface with high light transmission. 24 foot 2 gauge truck side quick disconnect cable, including solid contact 3/8 eye. Tall x 8 in. It extends the lifespan of the light bar beyond 50, our LED light pod uses 1070 aluminum alloy as the casing which can has best heat dissipation and best seal ability for the heat sink.

Deep. Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices. Ideal for 8000 lbs to 13, 000 lbs winches.

More information about TGL-Global 3-8TS #ad


Similar products



Goplus 36" Winch Mounting Plate 13000 lb Capacity Mount Bracket Truck Trailer ATV

#ad
#ad
Superbuy #ad - Universal: allows quick connect and disconnect for winches or other electrical devices. That's a total of 18W with a 6, 000k color temperature. Made of water-resistant nylon. Measures 21 in. Size: connectors measure 3-1/8" long x 2-1/8" wide x 1" thick and measure 5-1/4" x 2-1/8" x 1" when connected as a set.

Fits 2-4 gauge wire; voltage: 12-36 volts; capacity: 175m amps; Allows for quick connect/disconnect of power from winches, trailers or other electrical devices. An upgraded PC lens surface with high light transmission. Wide x 10-1/2 in. Measures 21 in. Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1".

Goplus 36" Winch Mounting Plate 13000 lb Capacity Mount Bracket Truck Trailer ATV #ad - Sewn-in elastic band around the edges for secure fit. Protects winch from the elements. Tall x 6-1/2 in. Includes rubber dust cover red to winch positive, black to winch negative. 18-24 inch high amp, extreme grab parrot clamps one end and Anderson/SMH 175 connector other end for connecting winch to a battery or allowing this set to be used as a jumper cable set.

24 foot 2 gauge truck side quick disconnect cable, including solid contact 3/8 eye.

More information about Superbuy #ad


Similar products



Goplus 10" x 4 1/2" Cradle Winch Mounting Plate,15000 Lb Capacity Foldable Winch Mount Recovery Winches

#ad
#ad
Superbuy #ad - 24 foot 2 gauge truck side quick disconnect cable, including solid contact 3/8 eye. Standard 10" on center fairlead bolt pattern. An upgraded PC lens surface with high light transmission. If there is any question, please feel free to contact with us. Brighter your night: 4 inch 27w round led light bar is equipped with 9, three watt high intensity LEDs.

Sewn-in elastic band around the edges for secure fit. Connector ends are identical, so either end is suitable for connection to the power or load side. Warranty: 100% money back guarantee. The sharp aluminum fan design, 000 hours. Adjustable mounting accessories:with the included adjustable mounting accessories, the LED work light can adjust to about 90 degrees.

Goplus 10" x 4 1/2" Cradle Winch Mounting Plate,15000 Lb Capacity Foldable Winch Mount Recovery Winches #ad - Diameter of the terminal pins: 1/4" / 6. 55mm connector: 3-1/8" x 2-1/8" x 1"; connected set: 5-1/4" x 2-1/8" x 1". Made of water-resistant nylon. Tall x 6-1/2 in. Protects winch from the elements. As well as 10" on center fairlead bolt pattern and 10" x 4 1/2" standard winch mount pattern ensure the installation is more convenient.

More information about Superbuy #ad


Similar products